journal article·2026-10Open access

Pore-scale analysis of effective electrical conductivity of unsupported catalyst layers for polymer electrolyte membrane water electrolyzers

Pablo A. García-Salaberri

Abstract

Reducing iridium (Ir) loading in polymer electrolyte membrane water electrolyzers (PEMWEs) is essential for lowering system cost, but it also strongly affects catalyst-layer (CL) connectivity and electronic transport. In this work, a three-dimensional pore-scale model is developed to investigate percolation-governed electrical conductivity in unsupported IrOx CLs by explicitly resolving agglomerates, ionomer, and pore space. The analysis systematically examines the effects of Ir loading, agglomerate size, agglomerate volume fraction, ionomer content, and PTL/CL interfacial pore size on in-plane (IP) and through-plane (TP) conductivity. The results reveal a critical percolation transition controlling IP transport, with conductivity rapidly collapsing below approximately 0.1–0.2 mg Ir cm −2 due to conductive-network fragmentation. In contrast, TP conductivity remains comparatively preserved because of geometric confinement, leading to pronounced transport anisotropy at low loadings. Smaller agglomerates, higher agglomerate fractions, moderate ionomer contents, and reduced PTL/CL interfacial pore sizes are shown to enhance conductive-network robustness and reduce sheet resistance. Percolation-inspired correlations and experimentally actionable design guidelines are further derived from the pore-scale simulations. Overall, the study provides new mechanistic insight into percolation-controlled electronic transport in unsupported PEMWE CLs and establishes practical structure–property relationships for the design of low-Ir electrodes with improved electrical conductivity.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Hybrid Renewable Energy Systems · Advanced Battery Materials and Technologies · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. A comprehensive review on PEM water electrolysis10.1016/j.ijhydene.2013.01.151 ↗
2. Low-temperature water electrolysis: fundamentals, progress, and new strategies10.1039/D2MA00185C ↗
3. Hydrogen production by PEM water electrolysis–A review
4. Materials engineering for high performance and durability proton exchange membrane water electrolyzers10.1021/acsaem.5c01989 ↗
5. Current status of water electrolysis for energy storage, grid balancing and sector coupling via power-to-gas and power-to-liquids: A review10.1016/j.rser.2017.09.003 ↗
6. Electrocatalytic oxygen evolution reaction in acidic environments–reaction mechanisms and catalysts10.1002/aenm.201601275 ↗
7. The mechanism of water oxidation: from electrolysis via homogeneous to biological catalysis10.1002/cctc.201000126 ↗
8. 1D two-phase, non-isothermal modeling of a proton exchange membrane water electrolyzer: An optimization perspective10.1016/j.jpowsour.2021.230915 ↗
9. Perspectives on low-temperature electrolysis and potential for renewable hydrogen at scale10.1146/annurev-chembioeng-060718-030241 ↗
10. Design of PEM water electrolysers with low iridium loading10.1177/09506608231216665 ↗
11. Designing and engineering efficient and durable low-ir catalysts at multiple scales for water electrolysis: Atomic structures, nanoscale morphologies, and macroscopic electrode configurations10.1002/aenm.202502984 ↗
12. Composite anode for PEM water electrolyzers: lowering iridium loadings and reducing material costs with a conductive additive10.1021/acsaem.4c01866 ↗
13. Measurement of the protonic and electronic conductivities of PEM water electrolyzer electrodes10.1021/acsami.0c12111 ↗
14. Morphological analysis of iridium oxide anode catalyst layers for proton exchange membrane water electrolysis using high-resolution imaging10.1016/j.ijhydene.2024.02.020 ↗
15. Analysis of representative elementary volume and through-plane regional characteristics of carbon-fiber papers: diffusivity, permeability and electrical/thermal conductivity10.1016/j.ijheatmasstransfer.2018.07.030 ↗
16. Reconstruction and effective transport properties of the catalyst layer in PEM fuel cells10.1149/1.3106136 ↗
17. Effective transport coefficients in PEM fuel cell catalyst and gas diffusion layers: Beyond bruggeman approximation10.1016/j.apenergy.2009.05.006 ↗
18. A numerical assessment of mitigation strategies to reduce local oxygen and proton transport resistances in polymer electrolyte fuel cells10.3390/ma16216935 ↗
19. Examining invasion-percolation across the cathode layered assembly in polymer electrolyte membrane fuel cells: Oxygen resistance, wettability and cracks10.1002/celc.202400068 ↗
20. Implications of inherent inhomogeneities in thin carbon fiber-based gas diffusion layers: A comparative modeling study10.1016/j.electacta.2018.09.089 ↗
21. Modeling of a polymer electrolyte membrane fuel cell with a hybrid continuum/discrete formulation at the rib/channel scale: Effect of relative humidity and temperature on performance and two-phase transport10.1016/j.apenergy.2024.123332 ↗
22. Stauffer · 2018
23. Sahimi · 1994
24. On the conductivity of proton-exchange membranes based on multiblock copolymers of sulfonated polysulfone and polyphenylsulfone: An experimental and modeling study10.3390/polym13030363 ↗
25. Characterization and modeling of free volume and ionic conduction in multiblock copolymer proton exchange membranes10.3390/polym14091688 ↗
26. Resistor-network modeling of ionic conduction in polymer electrolytes10.1016/j.electacta.2015.03.126 ↗
27. The impact of catalyst layer composition and structure on performance and durability of PEMWE anodes10.1002/admt.202501870 ↗
28. Elucidating effects of catalyst loadings and porous transport layer morphologies on operation of proton exchange membrane water electrolyzers10.1016/j.apcatb.2022.121213 ↗
29. Insights into the effect of drying temperature on catalyst layer structure and PEM water electrolysis performance10.1016/j.ijhydene.2023.10.108 ↗
30. Analysis of catalyst layer microstructures: from imaging to performance10.1002/fuce.201600008 ↗
31. Morphological analyses of polymer electrolyte fuel cell electrodes with nano-scale computed tomography imaging10.1002/fuce.201300008 ↗
32. Three-dimensional microstructure analysis of a polymer electrolyte membrane water electrolyzer anode10.1016/j.jpowsour.2018.04.089 ↗
33. Designing catalyst layer morphology for high-performance water electrolysis using synchrotron X-ray nanotomography
34. Fabrication of catalyst layer for proton exchange membrane water electrolyzer: I. Effects of dispersion on particle size distribution and rheological behavior10.1016/j.ijhydene.2023.08.154 ↗
35. Stochastic generation of electrolyzer anode catalyst layers10.1016/j.electacta.2023.142701 ↗
36. Examining the mass transport resistance of porous transport layers at the rib/channel scale in polymer electrolyte membrane water electrolyzers: Modeling and design10.1016/j.ijheatmasstransfer.2025.126889 ↗
37. Investigation on the performance of proton exchange membrane water electrolyzer coupled with a catalyst layer pore network model
38. Unraveling the effect of anode catalyst layer thickness on the performance of proton-exchange membrane water electrolyzers by numerical modeling10.1016/j.jpowsour.2025.238578 ↗
39. The critical role of the anode porous transport layer/catalyst layer interface of polymer electrolyte membrane water electrolyzers: A parametric analysis10.1016/j.cej.2025.160722 ↗
40. Recent progress on topological semimetal IrO2: electronic structures, synthesis, and transport properties
41. Substrate temperature dependent structural, optical and electrical properties of spray deposited iridium oxide thin films10.1016/S0169-4332(02)01191-1 ↗
42. Thickness-dependent properties of sprayed iridium oxide thin films10.1016/S0254-0584(03)00132-9 ↗
43. Aging iridium oxide catalyst inks: a formulation strategy to enhance ink processability for polymer electrolyte membrane water electrolyzers10.1039/D4SM00987H ↗
44. Assessing optical and electrical properties of highly active IrO x catalysts for the electrochemical oxygen evolution reaction via spectroscopic ellipsometry10.1021/acscatal.0c03800 ↗
45. Microporous transport layers facilitating low iridium loadings in polymer electrolyte water electrolysis10.1039/D3EY00279A ↗
46. Influence of ionomer content in IrO2/TiO2 electrodes on PEM water electrolyzer performance10.1149/2.0231611jes ↗
47. Essentials of high performance water electrolyzers–from catalyst layer materials to electrode engineering10.1002/aenm.202101998 ↗
48. New insights into perfluorinated sulfonic-acid ionomers10.1021/acs.chemrev.6b00159 ↗
49. Self-assembly and transport limitations in confined nafion films10.1021/ma301999a ↗
50. Modeling of oxygen reduction reaction and water formation in polymer electrolyte fuel cell catalyst layers10.1016/j.electacta.2015.12.031 ↗
51. Fuel cell catalyst layers: A polymer science perspective10.1021/cm401445h ↗
52. Iridium surface oxide affects the nafion interface in proton-exchange-membrane water electrolysis10.1021/acsenergylett.4c01508 ↗
53. Numerical simulation of gradient catalyst layer design in proton exchange membrane water electrolyzer with enhanced performance10.1016/j.fuel.2024.131444 ↗
54. Effect of thickness and outlet area fraction of macroporous gas diffusion layers on oxygen transport resistance in water injection simulations10.1007/s11242-022-01858-5 ↗
55. New insight into dispersion stability of IrOx catalyst slurry for polymer electrolyte membrane water electrolysis through real-time comprehensive multiwavelength optical analysis10.1016/j.jece.2024.113810 ↗
56. Mauger · 2022
57. Ultrathin microporous transport layers: Implications for low catalyst loadings, thin membranes, and high current density operation for proton exchange membrane electrolysis10.1002/aenm.202302786 ↗
58. Preparation and performance evaluation of microporous transport layers for proton exchange membrane (PEM) water electrolyzer anodes10.1149/1945-7111/ad63cf ↗
59. Effect of water sorption on the electronic conductivity of porous polymer electrolyte membrane fuel cell catalyst layers10.1021/am503509j ↗
60. Effective protonic and electronic conductivity of the catalyst layers in proton exchange membrane fuel cells10.1016/j.elecom.2004.02.006 ↗
61. Modeling the effect of low pt loading cathode catalyst layer in polymer electrolyte fuel cells: Part I. Model formulation and validation10.1149/1945-7111/ac4456 ↗
62. Ionomer-free electrodes in PEM water electrolyzers: a critical review
63. Ionomer-free and recyclable porous-transport electrode for high-performing proton-exchange-membrane water electrolysis10.1038/s41467-023-40375-x ↗
64. Designing electrodes with no ionomers: A perspective on ionomer-free electrodes for proton-exchange-membrane water electrolyzers10.1021/acsaem.5c00425 ↗
65. Pioneering microporous layers for proton-exchange-membrane water electrolyzers via tape casting10.1149/1945-7111/ad54f1 ↗