journal article·2026-10Open access

Electrodeposited Ni–S cathodes on stainless steel nonwovens for PGM-free anion exchange membrane water electrolysis at high current density

Miriam Hesse, Mila Manolova, Tiziana Heiss, Bastian Kaufmann, Enado Pineti, Ivan Radev, Şeniz Sörgel, Holger Kaßner, Thomas Ernst Müller, Ulf-Peter Apfel

Abstract

Developing cost-effective and scalable cathodes is critical for industrial anion exchange membrane water electrolysis (AEM-WE). This work proposes that Ni-S catalyst layers, electrodeposited directly onto stainless steel nonwovens, enable simultaneous catalyst synthesis and integration into a three-dimensional porous transport layer. Without using platinum group metals (PGMs), the tested membrane-electrode assemblies (MEAs) achieved current densities of 2.5 A cm −2 at 2.0 V in 1 M KOH at 60 °C, demonstrating competitive performance under industry-relevant conditions. Characterization indicated an amorphous Ni-S coating with homogeneous sulfur distribution throughout the porous substrate. Electrochemical impedance spectroscopy revealed a lower apparent charge-transfer resistance than Pt/C on identical substrates, indicating improved interfacial coupling. During operation, partial sulfur leaching was accompanied by formation of nickel-enriched (oxy)hydroxide species. Extended operation at 1 A cm −2 showed that the strongest voltage increase occurs during the initial MEA restructuring period, whereas later operation intervals exhibit apparent voltage increase rates below 1 mV h −1 . Impedance measurements and anode-exchange experiments further indicated that the observed voltage increase represents a full-MEA response rather than direct evidence of irreversible cathode degradation. Our results demonstrate that electrodeposited Ni-S cathodes on stainless steel nonwovens provide a scalable, PGM-free approach for high-current AEM-WE, combining manufacturability, performance, and durability.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Membrane-based Ion Separation Techniques · Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Perspective of the role of hydrogen in the 21st century energy transition10.1016/j.enconman.2021.114898 ↗
2. Integration of renewable-energy-based green hydrogen into the energy future10.3390/pr11092685 ↗
3. Green, turquoise, blue, or grey? Environmentally friendly hydrogen production in transforming energy systems10.1016/j.pecs.2022.100996 ↗
4. Promising pathways: the geographic and energetic potential of power-to-x technologies based on regeneratively obtained hydrogen10.1016/j.rser.2020.110644 ↗
5. The environmental impact of renewable hydrogen supply chains: local vs. remote production and long-distance hydrogen transport10.1016/j.apenergy.2023.121920 ↗
6. A review of membrane electrode assemblies for the anion exchange membrane water electrolyser: perspective on activity and stability10.1155/2024/7856850 ↗
7. Anion exchange membrane water electrolysis: the future of green hydrogen10.1021/acs.jpcc.3c00319 ↗
8. Essentials of high performance water electrolyzers – from catalyst layer materials to electrode engineering
9. Current status of water electrolysis for energy storage, grid balancing and sector coupling via power-to-gas and power-to-liquids: a review10.1016/j.rser.2017.09.003 ↗
10. High-performance anion exchange membrane water electrolyzers with a current density of 7.68 A Cm −2 and a durability of 1000 hours10.1039/D1EE02642A ↗
11. Technology landscape of anion exchange membrane water electrolyzers: where are we today?10.1021/acsenergylett.5c01366 ↗
12. Novel fe‐modulating raney‐ni electrodes toward high‐efficient and durable AEM water electrolyzer10.1002/aenm.202501634 ↗
13. Synergistic effects of Ni3+–Cu0/+ dual sites for efficient and stable hydrogen production in AEM water electrolysis10.1016/j.apcatb.2026.126597 ↗
14. Electrodeposition-fabricated catalysts for polymer electrolyte water electrolysis10.1007/s11814-020-0626-y ↗
15. Anion exchange membrane water electrolyzer: electrode design, lab-scaled testing system and performance evaluation
16. Electrocatalytic properties of Ni-Based alloys toward hydrogen evolution reaction in acid media10.1149/1.1561629 ↗
17. In situ activation with Mo of Ni–Co alloys for hydrogen evolution reaction10.1016/j.ijhydene.2013.11.093 ↗
18. Electrodeposited NiFeCo and NiFeCoP alloy cathodes for hydrogen evolution reaction in alkaline medium10.1016/j.ijhydene.2016.05.164 ↗
19. Advanced alkaline water electrolysis stack with non-noble catalysts and hybrid electrical connections of the single cells10.3390/catal14030179 ↗
20. Engineering multiphasic MoSe2/NiSe heterostructure interfaces for superior hydrogen production electrocatalysis10.1016/j.apcatb.2022.121434 ↗
21. Diverse MOFs-derived carbon-based materials for advanced electrochemical energy applications
22. Promoting electrocatalytic overall water splitting by sulfur incorporation into CoFe-(oxy)hydroxide10.1039/D1NA00486G ↗
23. Local surface structure and composition control the hydrogen evolution reaction on iron nickel sulfides10.1002/anie.201712679 ↗
24. Fe/Co and Ni/Co-pentlandite type electrocatalysts for the hydrogen evolution reaction10.1016/S1872-2067(20)63682-8 ↗
25. Influence of the Fe:Ni Ratio and Reaction Temperature on the Efficiency of (Fe x Ni 1–x) 9 S 8 electrocatalysts applied in the Hydrogen Evolution Reaction10.1021/acscatal.7b02617 ↗
26. Operando phonon studies of the protonation mechanism in highly active hydrogen evolution reaction pentlandite catalysts10.1021/jacs.7b07902 ↗
27. Direct electrodeposition of Ni‐Co‐S on carbon paper as an efficient cathode for anion exchange membrane water electrolysers10.1002/er.5875 ↗
28. A novel Ni-S-Mn electrode with hierarchical morphology fabricated by gradient electrodeposition for hydrogen evolution reaction10.1016/j.apsusc.2020.145944 ↗
29. Composition‐dependent morphology, structure, and catalytical performance of nickel–iron layered double hydroxide as highly‐efficient and stable anode catalyst in anion exchange membrane water electrolysis10.1002/adfm.202203520 ↗
30. Benchmarking heterogeneous electrocatalysts for the oxygen evolution reaction10.1021/ja407115p ↗
31. Three-dimensional Ni-Co alloy hierarchical nanostructure as efficient non-noble-metal electrocatalyst for hydrogen evolution reaction10.1016/j.apsusc.2018.09.204 ↗
32. Nichole Bastin. Stainless MMI: stainless demand slow, NAS determines new ferrochrome pricing [Internet] [cited 2025 Jul 2]. Available from: https://agmetalminer.com/2024/06/25/stainless-demand-slow-nickel-price/....
33. Stainless steel felt as a combined OER electrocatalyst/porous transport layer for investigating anion-exchange membranes in water electrolysis10.1021/acsenergylett.3c00878 ↗
34. Electrodeposition of graded Ni-S film for hydrogen evolution reaction10.1016/j.matlet.2017.01.112 ↗
35. One-step controllable synthesis of amorphous (Ni-Fe)S/NiFe(OH) hollow microtube/sphere films as superior bifunctional electrocatalysts for quasi-industrial water splitting at large-current-density10.1016/j.apcatb.2019.01.082 ↗
36. In-situ intercalation of NiFe LDH materials: an efficient approach to improve electrocatalytic activity and stability for water splitting10.1016/j.jpowsour.2017.02.062 ↗
37. Three-dimensional unified electrode design using a NiFeOOH catalyst for superior performance and durable anion-exchange membrane water electrolyzers10.1021/acscatal.1c04117 ↗
38. Study of amorphous Ni–S–Co alloy used as hydrogen evolution reaction cathode in alkaline medium10.1016/j.ijhydene.2003.07.003 ↗
39. Structures and electrochemical properties of amorphous nickel sulphur coatings electrodeposited on the nickel foam substrate as hydrogen evolution reaction cathodes10.1016/j.surfcoat.2006.01.016 ↗
40. Self-supported Ni/NiSP x microdendrite structure for highly efficient and stable overall water splitting in simulated industrial environment10.1021/acssuschemeng.9b02061 ↗
41. 3D structured Mo-doped Ni3S2 nanosheets as efficient dual-electrocatalyst for overall water splitting10.1016/j.apsusc.2018.02.076 ↗
42. Ni3S2 nanosheets array supported on Ni foam: a novel efficient three-dimensional hydrogen-evolving electrocatalyst in both neutral and basic solutions10.1016/j.ijhydene.2015.02.038 ↗
43. Progress and challenge of amorphous catalysts for electrochemical water splitting10.1021/acsmaterialslett.0c00502 ↗
44. Amorphous catalysts and electrochemical water splitting: an untold story of harmony10.1002/smll.201905779 ↗
45. Deciphering role of dual nickel sites in reconstructed hetero-anionic structure of nickel sulfide for boosted hydrogen evolution reaction10.1016/j.apcatb.2024.124270 ↗
46. Activation of a Ni electrocatalyst through spontaneous transformation of nickel sulfide to nickel hydroxide in an oxygen evolution reaction10.1016/j.apcatb.2018.03.083 ↗
47. Design of F doped sulfide bifunctional catalyst and investigation on the mechanism transformation of oxygen evolution reaction10.1016/j.cej.2024.158921 ↗
48. X‐ray photoelectron spectroscopic chemical state quantification of mixed nickel metal, oxide and hydroxide systems10.1002/sia.3026 ↗
49. A general strategy for Ni0–NiOOH hybrid catalyst of high hydrogen evolution activity10.1016/j.ijhydene.2024.04.282 ↗
50. Performance and stability of a critical raw materials-free anion exchange membrane electrolysis cell
51. The stability challenges of oxygen evolving catalysts: towards a common fundamental understanding and mitigation of catalyst degradation10.1002/anie.201608601 ↗
52. Dynamic restructuring of nickel sulfides for electrocatalytic hydrogen evolution reaction10.1038/s41467-024-49015-4 ↗
53. Hydrogen evolution reaction on ultra-smooth sputtered nanocrystalline Ni thin films in alkaline media-from intrinsic activity to the effects of surface oxidation10.3390/nano13142085 ↗
54. In situ activation-induced surface reconstruction on Cr-incorporated Ni3S2 for enhanced alkaline hydrogen evolution reaction10.1039/D5CP00813A ↗
55. Multistep sulfur leaching for the development of a highly efficient and stable NiSx/Ni(OH)2/NiOOH electrocatalyst for anion exchange membrane water electrolysis10.1021/acsami.2c01302 ↗
56. Heterostructured binary Ni-W sulfides nanosheets as pH-universal electrocatalyst for hydrogen evolution10.1016/j.apsusc.2018.03.177 ↗
57. Corrosion behavior of 316L stainless steel anode in alkaline sulfide solutions and the consequent influence on Ga electrowinning10.1016/j.hydromet.2015.09.009 ↗
58. Interface-engineered NiFe/Ni-S nanoparticles for reliable alkaline oxygen production at industrial current: a sulfur source confinement strategy
59. Porous heterojunction of Ni2P/Ni7S6 with high crystalline phase and superior conductivity for industrial anion exchange membrane water electrolysis10.1016/j.apcatb.2023.122633 ↗
60. Electrodeposition and optimisation of amorphous NixSy catalyst for hydrogen evolution reaction in alkaline environment
61. Boosting alkaline hydrogen evolution reaction by modulating D-Band center in bimetallic sulfide Ni3S2-FeS heterointerfaces