Composition-dependent electrochemical performance of pitch-derived Si/C composite anodes from recycled silicon
Source abstract
Abstract
Silicon (Si) is considered one of the most promising anode materials for next-generation lithium-ion batteries (LIBs) due to its exceptionally high theoretical capacity; however, its practical application is severely limited by large volume expansion, unstable interfacial reactions, and poor intrinsic conductivity. In this study, pitch-coated Si/C composite anodes were developed using recycled waste Si, and the effect of Si/C composition on structural and electrochemical properties was systematically investigated. By employing petroleum pitch as a carbon precursor, a conformal carbon matrix was formed around Si particles, providing enhanced electrical connectivity, effective buffering of volume expansion, and improved interfacial stability. A key finding of this work is that the Si-to-carbon ratio critically governs the trade-off between capacity and stability. As the carbon content increased, the initial capacity decreased, whereas the initial Coulombic efficiency and cycling stability were significantly improved. Notably, the Si/C (35:65) electrode exhibited the optimal balance between reversible capacity and cycling performance. These results demonstrate that pitch-derived carbon not only stabilizes the electrode structure but also regulates interfacial reactions, highlighting compositional optimization of recycled Si-based composites as a practical and scalable strategy for high-performance LIB anodes.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Fiber-reinforced polymer composites · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Batteries and fuel cells for emerging electric vehicle markets10.1038/s41560-018-0108-1 ↗
2. Building better batteries10.1038/451652a ↗
3. Lithium-ion batteries. A look into the future10.1039/c1ee01388b ↗
4. All-solid Lithium electrodes with mixed-conductor matrix10.1149/1.2127495 ↗
5. Alloy negative electrodes for Li-ion batteries10.1021/cr500207g ↗
6. Recent progress in Si-based materials for performance-enhanced lithium-ion batteries10.3390/molecules28052079 ↗
7. Microscale Si-based anodes: fundamental understanding and industrial prospects for practical high-energy lithium-ion batteries10.1021/acsnano.1c05898 ↗
8. 25th anniversary article: understanding the lithiation of Si and other alloying anodes for lithium-ion batteries10.1002/adma.201301795 ↗
9. Host–guest interlocked complex binder for Si–graphite composite electrodes in lithium ion batteries10.1002/aenm.202103718 ↗
10. Si-based nanomaterials for lithium-ion batteries: a review10.1002/aenm.201300882 ↗
11. A high capacity nano-Si composite anode material for lithium rechargeable batteries10.1149/1.1390899 ↗
12. High performance Si nanowire field effect transistors10.1021/nl025875l ↗
13. Si nanotube battery anodes10.1021/nl902058c ↗
14. Interconnected Si hollow nanospheres for lithium-ion battery anodes with long cycle life10.1021/nl201470j ↗
15. Scalable synthesis of si-nanolayer-embedded graphite for high-energy lithium-ion batteries10.1038/nenergy.2016.113 ↗
16. Scalable synthesis of a novel structured graphite/Si/pyrolyzed-carbon composite as anode material for high-performance lithium-ion batteries10.1016/j.jallcom.2016.07.148 ↗
17. Amorphous carbon-encapsulated Si nanoparticles loading on MCMB with sandwich structure for lithium ion batteries10.1016/j.electacta.2019.03.154 ↗
18. Walnut-structure Si-G/C materials with high coulombic efficiency for long-life lithium ion batteries10.1039/C8RA04804E ↗
19. Failure modes of Si powder negative electrode in lithium secondary batteries10.1149/1.1792242 ↗
20. The failure mechanism of nano-sized Si-based negative electrodes for lithium ion batteries10.1039/c1jm10213c ↗
21. Si electrodes for Li-ion batteries. Addressing the challenges through coordination chemistry10.1021/acsenergylett.8b02433 ↗
22. Effect of carbon coating on electrochemical performance of hard carbons as anode materials for lithium-ion batteries10.1016/j.jpowsour.2006.12.078 ↗
23. Coating of graphite anode with coal tar pitch as an effective precursor for enhancing the rate performance in Li-ion batteries: effects of composition and softening points of coal tar pitch10.1016/j.carbon.2015.07.030 ↗
24. Microstructure and electrochemical performance of Si–SiO2–C composites as the negative material for Li-ion batteries10.1016/j.jpowsour.2010.01.043 ↗
25. Compact structured Si/carbon composites as high-performance anodes for lithium ion batteries10.1007/s11581-018-2486-6 ↗
26. Effect of carbon matrix on electrochemical performance of Si/C composites for use in anodes of lithium secondary batteries10.5012/bkcs.2013.34.5.1435 ↗
27. Robust pitch on Si nanolayer-embedded graphite for suppressing undesirable volume expansion10.1002/aenm.201803121 ↗
28. Amorphous/ordered dual carbon coated silicon nanoparticles as anode to enhance cycle performance in lithium ion batteries10.1016/j.electacta.2018.10.186 ↗
29. Properties of SiC films obtained by the method of substitution of atoms on porous silicon10.1149/2.0061804jss ↗
30. Assessing the structural properties of graphitic and non-graphitic carbons by Raman spectroscopy10.1016/j.carbon.2019.12.094 ↗