journal article·2026-10Open access

Balancing ion transport and high-voltage stability in solvent-free UV-crosslinked PEO/PEC solid polymer electrolytes with succinonitrile

Francesco Gambino, Hamideh Darjazi, Giuseppe Antonio Elia, Claudio Gerbaldi

Abstract

Lithium metal batteries coupled with high-voltage cathodes offer outstanding energy density, but the development of solid polymer electrolytes (SPEs) simultaneously stable against lithium metal and oxidative cathodes remains a major challenge. Herein, a fully solvent-free route combining melt extrusion and UV curing is proposed to fabricate poly(ethylene oxide)-poly(ethylene carbonate) (PEO-PEC) SPEs plasticized with succinonitrile (SN). By tuning the PEO/PEC ratio and introducing SN, the electrolyte properties are optimized through the combined control of crystallinity, segmental mobility, and interfacial stability. Among the investigated formulations, the PEO/PEC 7:3 SPE encompassing SN exhibits the best overall performance, delivering practical ionic conductivity at 40 °C and anodic stability up to ca. 4.8 V vs. Li + /Li. In symmetric Li||Li cells, the SPE enables continuous reversible lithium plating/stripping for more than 1400 h, maintaining moderate and stabilized polarization, and highlighting its enhanced compatibility with lithium metal. Its practical applicability is further demonstrated in truly all-solid-state Li-metal cells using both LiFePO 4 and NMC622 cathodes, which deliver full practical specific capacities and stable cycling at 40 °C. Overall, this work demonstrates that solvent-free reactive processing of SN-plasticized PEO-PEC SPEs is an effective strategy to mitigate the limitations of conventional polymer electrolytes and to enable high-energy density solid-state Li-metal batteries.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Fuel Cells and Related Materials · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Lithium battery chemistries enabled by solid-state electrolytes10.1038/natrevmats.2016.103 ↗
2. Building Better Batteries10.1038/451652a ↗
3. Advancing lithium metal batteries10.1016/j.joule.2018.03.008 ↗
4. Progress in solid electrolytes toward realizing solid-state lithium batteries10.1016/j.jpowsour.2018.05.003 ↗
5. Bifunctional interphase-enabled Li10 GeP2 S12 electrolytes for lithium–sulfur battery10.1021/acsenergylett.0c02617 ↗
6. Explosion characteristics for Li-ion battery electrolytes at elevated temperatures10.1016/j.jhazmat.2019.02.108 ↗
7. Bridging interparticle Li+ conduction in a soft ceramic oxide electrolyte10.1021/jacs.0c12965 ↗
8. Enhanced surface interactions enable fast Li+ conduction in oxide/polymer composite electrolyte10.1002/anie.201914478 ↗
9. Composite polymer electrolytes with improved lithium metal electrode interfacial properties: I. Elechtrochemical properties of dry PEO‐LiX systems10.1149/1.1838925 ↗
10. Li2S6-Integrated PEO-based polymer electrolytes for all-solid-state lithium-metal batteries10.1002/anie.202106039 ↗
11. Ternary Poly(ethylene oxide)/Poly(l , l -lactide) PEO/PLA blends as high-temperature solid polymer electrolytes for lithium batteries10.1021/acsapm.1c01093 ↗
12. Polymer electrolytes for lithium-based batteries: advances and prospects10.1016/j.chempr.2019.05.009 ↗
13. Poly(Ethylene oxide)-based electrolyte for solid-state-lithium-batteries with high voltage positive electrodes: evaluating the role of electrolyte oxidation in rapid cell failure10.1038/s41598-020-61373-9 ↗
14. In-situ polymerized gel polymer electrolytes for stable solid-state lithium batteries with long-cycle life10.1016/j.jpowsour.2023.233651 ↗
15. Single-Ion conducting polymer nanoparticles as functional fillers for solid electrolytes in lithium metal batteries10.1021/acsami.1c15771 ↗
16. Tough gel electrolyte using double polymer network design for the safe, stable cycling of lithium metal anode10.1002/anie.201709774 ↗
17. Combustion characteristics and fire risk assessment of EC/DMC/EMC electrolytes for Li-ion batteries10.1016/j.est.2025.115308 ↗
18. Solid‐State post Li metal ion batteries A sustainable forthcoming reality10.1002/aenm.202100785 ↗
19. Mixing functionality in polymer electrolytes: a new horizon for achieving high-performance all-solid-state lithium metal batteries10.1002/anie.202422169 ↗
20. The plastic-crystalline phase of succinonitrile as a universal matrix for solid-state ionic conductors10.1038/nmat1158 ↗
21. Succinonitrile as a versatile additive for polymer electrolytes10.1002/adfm.200601070 ↗
22. All-solid-state lithium battery fitted with polymer electrolyte enhanced by solid plasticizer and conductive ceramic filler10.1149/2.1371814jes ↗
23. Succinonitrile-polymer composite electrolytes for Li-Ion solid-state batteries─the influence of polymer additives on thermomechanical and electrochemical properties10.1021/acsomega.2c02174 ↗
24. Anchoring succinonitrile by solvent-Li+ associations for high-performance solid-state lithium battery10.1016/j.cej.2020.126754 ↗
25. PEO based polymer in plastic crystal electrolytes for room temperature high-voltage lithium metal batteries10.1016/j.nanoen.2021.106205 ↗
26. Homogeneous and fast ion conduction of PEO‐Based solid‐state electrolyte at low temperature10.1002/adfm.202007172 ↗
27. A new composite solid electrolyte PEO/Li10GeP2S12/SN for all-solid-state lithium battery10.1016/j.electacta.2016.06.025 ↗
28. Understanding the effect of UV-Induced cross-linking on the physicochemical properties of highly performing PEO/LiTFSI-Based polymer electrolytes10.1021/acs.langmuir.9b00041 ↗
29. Cross-linked block copolymer/ionic liquid self-assembled blends for polymer gel electrolytes with high ionic conductivity and mechanical strength10.1021/ma401302r ↗
30. Formulating PEO-polycarbonate blends as solid polymer electrolytes by solvent-free extrusion10.1016/j.powera.2024.100160 ↗
31. Infrared and Raman study of the PEO-LiTFSI polymer electrolyte10.1016/S0013-4686(97)10092-5 ↗
32. Composite cathodes with succinonitrile‐based ionic conductors for long‐cycle‐life solid‐state lithium metal batteries10.1002/batt.202100162 ↗
33. Succinonitrile coordination-induced in situ polymerization-based composite solid electrolytes for solid-state batteries10.1016/j.jpowsour.2025.237924 ↗
34. Poly(ethylene oxide)-based electrolytes for lithium-ion batteries10.1039/C5TA03471J ↗
35. Super soft all-ethylene oxide polymer electrolyte for safe all-solid lithium batteries10.1038/srep19892 ↗
36. High-safety all-solid-state lithium-ion battery working at ambient temperature with in situ UV-Curing polymer electrolyte on the electrode10.1002/celc.202000411 ↗
37. Highly conductive solvent-free polymer electrolyte membrane for lithium-ion batteries: effect of prepolymer molecular weight10.1016/j.memsci.2015.10.008 ↗
38. Thermal and electrochemical decomposition of lithium peroxide in non-catalyzed carbon cathodes for Li–air batteries10.1039/c3cp51056e ↗
39. Dry extrusion of poly(ethylene oxide)-polycarbonate all-solid-state electrolytes for Li-metal batteries: effect of UV-crosslinking on the electrochemical performance
40. Room-temperature performance of Poly(Ethylene ether Carbonate)-Based solid polymer electrolytes for all-solid-state lithium batteries10.1038/s41598-017-17697-0 ↗
41. Polycarbonate-based solid polymer electrolytes for Li-ion batteries10.1016/j.ssi.2013.08.014 ↗
42. A solid-like succinonitrile-based polymer electrolyte with superior mechanical strength for high performance lithium metal batteries10.1016/j.est.2024.112016 ↗
43. A silica‐aerogel‐reinforced composite polymer electrolyte with high ionic conductivity and high modulus10.1002/adma.201802661 ↗
44. A concentrated poly(ethylene carbonate)/poly(trimethylene carbonate) blend electrolyte for all-solid-state Li battery10.1038/s41428-019-0184-5 ↗
45. Safety-reinforced succinonitrile-based electrolyte with interfacial stability for high-performance lithium batteries10.1021/acsami.7b09119 ↗
46. At the polymer electrolyte interfaces: the role of the polymer host in interphase layer formation in Li-batteries10.1039/C5TA02485D ↗
47. Novel PEO-based composite electrolyte for low-temperature all-solid-state lithium metal batteries enabled by interfacial cation-assistance10.1016/j.ensm.2022.12.048 ↗