Ionic polymer-functionalized separator for high performance Li-S battery
Source abstract
Abstract
With the rapid development of commercialization, the progress of lithium-sulfur (Li-S) batteries has also encountered some severe issues, including low electrical conductivity, shuttle effect of LiPSs, volume changes during charge and discharge, which lead to serious battery capacity attenuation, poor cycle stability and other problems. In order to overcome these problems, a new barrier layer based on multifunctional covalent triazine frameworks (CTFs) is designed as a separator for Li-S battery. This barrier layer can alleviate the shuttle effect by means of the electrostatic interaction between the frameworks and Li + and S x 2− . Therefore, the Li-S battery with ionic polymer-functionalized separators has shown remarkably improvements in electrochemical performances. A high initial capacity of 816.4 mAh g −1 is observed at 1C. Furthermore, after 500 cycles, its capacity retention rate reached 66%. This study emphasizes that the multifunctional constraints between the separator and polysulfides can suppress the shuttle, thus providing a promising strategy for the construction of Li-S batteries.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Dielectric materials and actuators
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Steric configuration optimization of dichlorobenzyl additives for enhanced performance of lithium–sulfur batteries10.1016/j.jpowsour.2025.238350 ↗
2. Manganese dioxide/single-walled carbon nanotube composite film as freestanding cathode with immobilized sulfur for lithium–sulfur batteries10.1016/j.jpowsour.2026.239341 ↗
3. The 2-EHA-AA-MMA terpolymer binder realizes a long-chain sulfur SPAN cathode via S-O covalent anchoring to construct high-capacity and shuttle-free Li-S batteries10.1016/j.jpowsour.2026.239531 ↗
4. Sulfur reduction catalyst design inspired by elemental periodic expansion concept for lithium–sulfur batteries10.1021/acsnano.2c00515 ↗
5. Toward critical electrode/electrolyte interfaces in rechargeable batteries10.1002/adfm.201909887 ↗
6. Separator modified by cobalt-embedded carbon nanosheets enabling chemisorption and catalytic effects of polysulfides for high-energy-density lithium-sulfur batteries10.1002/aenm.201901609 ↗
7. Rechargeable lithium–sulfur batteries10.1021/cr500062v ↗
8. Altering the reaction mechanism to eliminate the shuttle effect in lithium–sulfur batteries10.1016/j.ensm.2020.01.002 ↗
9. Suppressing the shuttle effect and dendrite growth in lithium–sulfur batteries10.1021/acsnano.0c02241 ↗
10. Engineering strategies for suppressing the shuttle effect in lithium–sulfur batteries10.1007/s40820-023-01223-1 ↗
11. Mesoporous titanium nitride-enabled highly stable lithium-sulfur batteries10.1002/adma.201601382 ↗
12. A new conjugated porous polymer with covalently linked polysulfide as cathode material for high-rate capacity and high coulombic efficiency lithium–sulfur batteries10.1021/acs.jpcc.9b02670 ↗
13. Nitrogen‐doped mesoporous carbon promoted chemical adsorption of sulfur and fabrication of high‐areal‐capacity sulfur cathode with exceptional cycling stability for lithium–sulfur batteries10.1002/adfm.201302631 ↗
14. Synergetic covalent and spatial confinement of sulfur species by phthalazinone-containing covalent triazine frameworks for ultrahigh performance of Li-S batteries10.1021/acsami.9b21481 ↗
15. Perfluoroaryl‐elemental sulfur SNAr chemistry in covalent triazine frameworks with high sulfur contents for lithium–sulfur batteries10.1002/adfm.201703947 ↗
16. Fluorinated, sulfur-rich, covalent triazine frameworks for enhanced confinement of polysulfides in lithium-sulfur batteries10.1021/acsami.7b10991 ↗
17. Elemental-sulfur-mediated facile synthesis of a covalent triazine framework for high-performance lithium–sulfur batteries10.1002/anie.201511553 ↗
18. Nitrogen and phosphorus codoped hierarchically porous carbon as an efficient sulfur host for Li-S batteries10.1016/j.ensm.2016.10.008 ↗
19. A highly conductive COF@CNT electrocatalyst boosting polysulfide conversion for Li-S chemistry10.1021/acsenergylett.1c00943 ↗
20. Porous organic polymers for polysulfide trapping in lithium–sulfur batteries10.1002/adfm.201707597 ↗
21. Multiple covalent triazine frameworks with strong polysulfide chemisorption for enhanced lithium–sulfur batteries
22. Covalent-organic frameworks: potential host materials for sulfur impregnation in lithium–sulfur batteries10.1039/C4TA00523F ↗
23. Modified separator performing dual physical/chemical roles to inhibit polysulfide shuttle resulting in ultrastable Li-S batteries10.1021/acsnano.7b06478 ↗
24. A facile strategy to improve the electrochemical performance of porous organic polymer‐based lithium–sulfur batteries10.1002/ente.201900583 ↗
25. Cationic polymer binder inhibit shuttle effects through electrostatic confinement in lithium sulfur batteries10.1039/C7TA10239A ↗
26. Electrostatic trapping of polysulfides enabled by imidazolium-based ionic polymers for high-energy-density lithium–sulfur batteries10.1039/C8TA01298A ↗
27. High-performance lithium-sulfur batteries achieved by a multifunctional SiO2-nanotubes/carbon composite interlayer10.1016/j.jallcom.2021.162580 ↗
28. Developing A “Polysulfide-Phobic” strategy to restrain shuttle effect in lithium–sulfur batteries10.1002/anie.201906055 ↗
29. Application of covalent organic frameworks in sulfur-based battery separators10.1002/smsc.202300056 ↗
30. Cationic-polymer-functionalized separator as a high-efficiency polysulfide shuttle barrier for long-life Li-S battery10.1021/acsaem.1c00281 ↗
31. Review on areal capacities and long-term cycling performances of lithium sulfur battery at high sulfur loading10.1016/j.ensm.2018.12.024 ↗
32. Graphitized porous carbon materials with high sulfur loading for lithium–sulfur batteries10.1016/j.nanoen.2016.12.060 ↗
33. In-situ constructing cathode protective film toward high performance of Li-S batteries at high sulfur loadings10.1016/j.jallcom.2024.174351 ↗
34. Covalent triazine frameworks incorporating charged polypyrrole channels for high-performance lithium–sulfur batteries10.1021/acs.chemmater.0c00246 ↗
35. Cationic covalent-organic framework as efficient redox motor for high-performance lithium–sulfur batteries
36. Covalent organic frameworks with lithiophilic and sulfiphilic dual linkages for cooperative affinity to polysulfides in lithium-sulfur batteries10.1016/j.ensm.2018.01.018 ↗
37. Ultrathin composite separator based on lithiated COF nanosheet for high stability lithium metal batteries
38. The fusion of imidazolium‐based ionic polymer and carbon nanotubes: one type of new heteroatom‐doped carbon precursors for high‐performance lithium–sulfur batteries10.1002/adfm.201703936 ↗
39. 3,5-Bis(trifluoromethyl)benzyl modified triazine-based covalent organic frameworks suppressing the shuttle effect of polysulfides in lithium–sulfur batteries10.1039/D3NJ03791F ↗
40. Upgrading traditional liquid electrolyte via in situ gelation for future lithium metal batteries10.1126/sciadv.aat5383 ↗
41. Bipolar fluorinated covalent triazine framework cathode with high lithium storage and long cycling capability10.1039/D2RA01582J ↗
42. The dual functions of defect‐rich carbon nanotubes as both conductive matrix and efficient mediator for Li-S batteries
43. Interfacial Build-In electric field unlocking hetero-architectured CoO-Co3O4 nanotubes toward high-performance Li-S batteries
44. Enhancing bidirectional Lithium sulfur battery performance through synergistic-induced 3D Li2S deposition10.1002/aenm.202504046 ↗
45. Dynamic reconstruction of polysulfides to elemental sulfur enabling high-performance Ah-Level lithium–sulfur pouch cells
46. Surface adaptive dual‐layer protection of li‐metal anode for extending cycle‐life of Li–Sulfur batteries with lean electrolyte
47. Scalable decoration of ultrafine metallic grains via hydrolysis-induced deposition for enhanced sulfur utilization in Lithium sulfur batteries