journal article·2026-10

Sulfuric acid–controlled electroplating of Sn nano-seeds on Cu current collectors toward stable anode-free lithium metal batteries

Dayoung Kim, Cheolhwan Song, Myung-Jun Kwak, Oh B. Chae

Publisher page

Abstract

Lithium metal batteries offer high energy density, yet their reversibility is severely limited by uneven Li nucleation and dendritic growth on lithiophobic Cu current collectors. Here, we report a bath-acidity-controlled Sn electroplating strategy to construct lithiophilic Sn-modified Cu current collectors (Sn@Cu) and regulate Li deposition behavior. By varying the H2SO4 concentration in a SnSO4–H2SO4 bath, we show that bath acidity governs the nucleation/growth balance of Sn, leading to distinct seed morphologies. The optimized 1.5 M H2SO4 bath yields uniformly dispersed Sn nano-seeds, whereas insufficient or excessive acidity produces coarse or non-uniform deposits. The uniform Sn nano-seed layer decreases the Li nucleation overpotential from 208.2 mV for bare Cu to 107 mV, promotes homogeneous Li plating, and enables stable plating/stripping with ~98% Coulombic efficiency over prolonged cycling. Ex situ and in situ impedance analyses reveal suppressed interfacial resistance growth from the early stage of Li plating, and cryogenic SEM confirms denser Li deposits on Sn@Cu than on bare Cu. Pre-lithiated full cells further show improved capacity retention. This work establishes bath-acidity-controlled Sn electroplating as a simple current-collector engineering route for stable anode-free lithium metal batteries.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Molten salt chemistry and electrochemical processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Promise and reality of post-lithium-ion batteries with high energy densities10.1038/natrevmats.2016.13 ↗
2. A uniform lithium ion flux and robust interphase enabled by anion anchoring additive for high energy density Si-based anodes10.1039/D6TA01386D ↗
3. Electric vehicles batteries: requirements and challenges10.1016/j.joule.2020.01.013 ↗
4. Ab initio calculations of Li2 (Co, Mn) O8 solid solutions for rechargeable batteries10.1142/S0217979219501510 ↗
5. Theoretical prediction of the 5 V rechargeable Li ion battery using Li2CoMn3O8 as a cathode10.1088/0031-8949/90/9/094012 ↗
6. Anode-free full cells: a pathway to high-energy density lithium-metal batteries10.1002/aenm.202000804 ↗
7. Beyond lithium ion batteries: higher energy density battery systems based on lithium metal anodes10.1016/j.ensm.2017.12.002 ↗
8. Anode-free rechargeable lithium metal batteries: progress and prospects10.1016/j.ensm.2020.07.004 ↗
9. Exploring the active lithium loss in anode‐free lithium metal batteries: mechanisms, challenges, and strategies
10. Reviving the lithium metal anode for high-energy batteries10.1038/nnano.2017.16 ↗
11. Toward safe lithium metal anode in rechargeable batteries: a review10.1021/acs.chemrev.7b00115 ↗
12. Interfacial issues and modification of solid electrolyte interphase for Li metal anode in liquid and solid electrolytes10.1002/aenm.202203791 ↗
13. Pathways for practical high-energy long-cycling lithium metal batteries10.1038/s41560-019-0338-x ↗
14. Status and challenges in enabling the lithium metal electrode for high-energy and low-cost rechargeable batteries10.1038/s41560-017-0047-2 ↗
15. Nanoscale nucleation and growth of electrodeposited lithium metal10.1021/acs.nanolett.6b04755 ↗
16. Accommodating lithium into 3D current collectors with a submicron skeleton towards long-life lithium metal anodes10.1038/ncomms9058 ↗
17. Selective deposition and stable encapsulation of lithium through heterogeneous seeded growth10.1038/nenergy.2016.10 ↗
18. Interface engineering of MOF nanosheets for accelerated redox kinetics in lithium-sulfur batteries
19. J. Lian, W. Chen, Z. Cheng, X. Lin, S. Xiang, B. Chen, Z. Zhang, Tailoring MOF separator with enhanced lithium-ion desolvation for high sulfur redox kinetics in lithium–sulfur batteries, Adv. Funct. Mater. n/a e75569.
20. Multifunctional HOF-based heterostructure enables advanced separator engineering for high-performance lithium-sulfur batteries
21. LPEO enhanced LAGP composite solid electrolytes for lithium metal batteries10.1016/j.greenca.2024.06.002 ↗
22. Hydrogenation of layered oxide cathodes as a new pathway of self-discharge in lithium-ion batteries10.1016/j.greenca.2025.03.002 ↗
23. An electron-deficient carbon current collector for anode-free Li-metal batteries10.1038/s41467-021-25848-1 ↗
24. Highly-lithiophilic Ag@ PDA-GO film to suppress dendrite formation on Cu substrate in anode-free lithium metal batteries10.1016/j.ensm.2020.11.023 ↗
25. Regulating local chemical softness of the collector to homogenize Li deposition for anode-free Li-metal batteries10.1039/D4EE03673E ↗
26. Molecular engineering of two-dimensional polyamide interphase layers for anode-free lithium metal batteries10.1038/s41563-025-02339-y ↗
27. Toward high‐energy‐density initial‐anode‐free lithium‐metal batteries via ultra‐thin protective ion‐transport‐promoting interface modification and surface prelithiation10.1002/smll.202406359 ↗
28. Polyethylene oxide film coating enhances lithium cycling efficiency of an anode-free lithium-metal battery10.1039/C7NR09058G ↗
29. Next-generation lithium metal anode engineering via atomic layer deposition10.1021/acsnano.5b02166 ↗
30. Multilayer-graphene-stabilized lithium deposition for anode-free lithium-metal batteries10.1039/C8NR06980H ↗
31. Anode-free lithium metal batteries with enhanced durability: magnetron-sputtered lithiophilic bimetallic coatings on Cu current collectors10.1016/j.cej.2025.167522 ↗
32. Optimizing current collector interfaces for efficient “anode‐free” lithium metal batteries10.1002/adfm.202311301 ↗
33. Electrode manufacturing for lithium-ion batteries—Analysis of current and next generation processing10.1016/j.est.2019.100862 ↗
34. Prospects for reducing the processing cost of lithium ion batteries10.1016/j.jpowsour.2014.11.019 ↗
35. The effect of alloy type of lithophilic Cu-Sn interface layer on the deposition/stripping behavior of lithium metal anode10.1016/j.jallcom.2022.164307 ↗
36. Li plating on alloy with superior electro-mechanical stability for high energy density anode-free batteries10.1016/j.ensm.2022.04.009 ↗
37. Theoretical and experimental studies of multiple nucleation10.1016/0013-4686(83)85163-9 ↗
38. Electrochemical aspects of tin electrodeposition on copper in acid solutions10.1016/j.electacta.2018.12.040 ↗
39. Electrodeposition of tin from a sulphate bath. An EQCM study10.1016/j.surfcoat.2015.08.052 ↗
40. Electrodeposition of palladium nanoparticles onto indium tin oxide glass electrode. A kinetical and morphological study and effect of the potential in the particle size10.1007/s10008-024-06134-8 ↗
41. Detection of lithium plating in lithium-ion batteries by distribution of relaxation times10.1016/j.jpowsour.2021.229867 ↗
42. The timescale identification decoupling complicated kinetic processes in lithium batteries10.1016/j.joule.2022.05.005 ↗
43. Non-destructive analysis of lithium dynamics in metal foil anodes for anode-free batteries: insights from distribution of relaxation times10.1016/j.jechem.2025.04.070 ↗
44. Potential-controlled Pre-SEI regulation for improved lithium reversibility in anode-free solid-state lithium metal batteries10.1002/adma.202502077 ↗
45. Practical relevance of charge transfer resistance at the Li metal electrode|electrolyte interface in batteries?10.1007/s10008-023-05792-4 ↗