journal article·2026-10Open access

Contribution of heat transport transients to the “inductive” loop in PEM fuel cell impedance: Modeling and experimental study

Andrei Kulikovsky, Tatyana Reshetenko

Abstract

The origin of the low-frequency “inductive” loop in the impedance spectra of PEM fuel cells is poorly understood. The relaxation of the fuel cell temperature in response to an AC perturbation of the cell current is one of the slowest processes in the cell. Here, we report a simple model for the non-stationary heat transport through the cathode side of a PEM fuel cell. This model establishes a linear relation between the perturbations in the heat flux emitted by the cathode catalyst layer (CCL) and the CCL temperature. Using the Arrhenius temperature dependencies of the CCL proton conductivity and the exchange current density of the oxygen reduction reaction, we derived analytical formulas for the contribution of the CCL temperature oscillations to the cell impedance. This enabled us to accurately fit the cell impedance model to the experimental spectrum measured at 800 mA cm −2 in the frequency range down to 10 mHz. The developed model explains the shape of the “inductive” low-frequency loop in the Nyquist spectrum of our cell.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrochemical Analysis and Applications · Electrostatics and Colloid Interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Electrical properties of solids. VIII. Dipole moments in polyvinyl chloride-diphenyl systems10.1021/ja01847a013 ↗
2. Deconvolution of electrochemical impedance spectra for the identification of electrode reaction mechanisms in solid oxide fuel cells10.1023/A:1020599525160 ↗
3. Optimal regularization in distribution of relaxation times applied to eletrochemical impedance spectroscopy: Ridge and Lasso regression methods - A theoretical and experimental study10.1016/j.electacta.2014.09.058 ↗
4. Fourier transform distribution function of relaxation times; Application and limitations10.1016/j.electacta.2014.12.059 ↗
5. Evaluation of electrochemical impedance spectra by the distribution of relaxation times10.2109/jcersj2.16267 ↗
6. Understanding the role of the anode on the polarization losses in high-temperature polymer electrolyte membrane fuel cells using the distribution of relaxation times analysis10.1016/j.jpowsour.2020.228469 ↗
7. Development of a typical distribution function of relaxation times model for polymer electrolyte membrane fuel cells and quantifying the resistance to proton conduction within the catalyst layer10.1021/acs.jpcc.1c03667 ↗
8. Understanding impedance spectra of a PEM fuel cell via the distribution of transport times10.1016/j.electacta.2025.147063 ↗
9. Inductive phenomena at low frequencies in impedance spectra of proton exchange membrane fuel cells – A review10.1016/j.jpowsour.2016.06.119 ↗
10. Experimental and numerical investigation of the low-frequency inductive features in differential pemfcs: Ionomer humidification and platinum oxide effects10.1149/1945-7111/acb3ff ↗
11. The effect of liquid saturation transients on PEM fuel cell impedance: Inductive loop and instability of catalyst layer operation10.1149/1945-7111/ad5efd ↗
12. A comparison of PEM fuel cell parameters resulting from the distribution of relaxation times, distribution of transport times, and physics-based modeling10.1016/j.electacta.2025.147529 ↗
13. Editors’ choice–review–impedance response of porous electrodes: Theoretical framework, physical models and applications10.1149/1945-7111/abc655 ↗
14. Analytical and fast numerical models for PEM fuel cell impedance with Damjanović kinetics of the oxygen reduction reaction10.1149/1945-7111/ae26d1 ↗
15. Shapes of electrochemical impedance of oxygen reduction reaction: A theoretical analysis10.1016/j.electacta.2026.148523 ↗
16. A physics–based impedance model of proton exchange membrane fuel cells exhibiting low–frequency inductive loops10.1149/2.0361506jes ↗
17. Effect of proton conductivity transients on PEM fuel cell impedance: Formation of a low–frequency inductive loop10.1016/j.elecom.2022.107340 ↗
18. Two–dimensional modeling of a polymer electrolyte membrane fuel cell with long flow channel. Part II. Physics–based electrochemical impedance analysis10.1016/j.jpowsour.2014.12.045 ↗
19. Reduction of PEM fuel cell impedance and resistivity under simultaneously applied oscillations of potential and oxygen supply10.1021/acs.jpcc.4c01010 ↗
20. Air perturbation-induced low-frequency inductive electrochemical impedance arc in proton exchange membrane fuel cells10.1016/j.jpowsour.2020.229245 ↗
21. Multicomponent transport in porous electrodes of proton exchange membrane fuel cells using the interdigitated gas distributors10.1149/1.1391561 ↗
22. Predicting water and current distributions in a commercial–size PEMFC10.1016/j.jpowsour.2004.03.059 ↗
23. Analysis of a two–phase non–isothermal model for a PEFC10.1149/1.1877992 ↗
24. Two–phase transients of polymer electrolyte fuel cells10.1149/1.2734076 ↗
25. 3D modeling of catalyst layers in PEM fuel cells10.1149/1.2777011 ↗
26. Two–phase transport in PEM fuel cell cathodes10.1115/1.2821597 ↗
27. Water balance simulations of a polymer-electrolyte membrane fuel cell using a two-fluid model10.1016/j.jpowsour.2011.03.068 ↗
28. Polymer electrolyte fuel cell modeling – A comparison of two models with different levels of complexity10.1016/j.ijhydene.2020.05.060 ↗
29. Analyzing temperature distribution, mass transport, and cell performance in PEM fuel cells with emphasis on GDL face permeability and thermal contact resistance parameters10.1021/acsomega.3c07932 ↗
30. Parameter sensitivity examination and discussion of PEM fuel cell simulation model validation. Part I. Current status of modeling research and model development10.1016/j.jpowsour.2006.01.078 ↗
31. Physical modeling of polymer-electrolyte membrane fuel cells: Understanding water management and impedance spectra10.1016/j.jpowsour.2018.04.070 ↗
32. Direct measurement of through–plane thermal conductivity and contact resistance in fuel cell materials10.1016/j.jpowsour.2006.06.092 ↗
33. Heat flux from the catalyst layer of a fuel cell10.1016/j.electacta.2011.07.113 ↗
34. Thermal conductivity and contact resistance of compressed gas diffusion layer of pem fuel cell10.1002/fuce.200700054 ↗
35. Effective thermal conductivity and thermal contact resistance of gas diffusion layers in proton exchange membrane fuel cells. Part 1: Effect of compressive load10.1016/j.jpowsour.2010.06.039 ↗
36. Polymer electrolyte fuel cell model10.1149/1.2085971 ↗
37. Temperature dependence of the electrode kinetics of oxygen reduction reaction at the platinum/nafion interface - a microelectrode investigation10.1149/1.2221258 ↗
38. A model for water transport in the membrane and an impedance spectroscopy study of the effect of relative humidity on PEM fuel cell parameters10.1149/1945-7111/ae6bf7 ↗
39. A review of polymer electrolyte membrane fuel cells: Technology, applications, and needs on fundamental research10.1016/j.apenergy.2010.09.030 ↗
40. Bergman · 2017
41. Analysis of free energy and entropy changes for half–cell reactions10.1149/1.2221123 ↗
42. Exceptional thermal conductivity increase of nafion by hydrogen-bonded water molecules10.1063/5.0217244 ↗