Tailoring the solid electrolyte interphase in anode-free lithium metal batteries via a thermal aging strategy
Source abstract
Abstract
Interfacial instability leading to rapid cycle life degradation remains a critical bottleneck for anode-free lithium metal batteries (AFLMBs). To address this, we propose a thermodynamic regulation strategy termed "pre-cycling + high-temperature resting" to tailor the solid electrolyte interphase (SEI). By introducing a mild thermal aging treatment at 40°C following the initial charge to 70% state of charge (SOC), a dense and uniform SEI film rich in inorganic components (LiF and Li3N) is successfully induced on the copper current collector. Multi-scale characterization results show that this strategy significantly enhances the mechanical strength of the SEI film (Young's modulus up to 7.41 GPa) and the ion transport kinetics of the electrolyte (lithium-ion transference number reaching 0.946). Consequently, lithium dendrite growth and dead lithium formation are effectively suppressed. Benefiting from these optimized interfacial properties, the assembled LFP||Cu anode-free full cells exhibit exceptional cycling stability at a current density of 1 mA cm-2. This work confirms the immense potential of mild thermal aging as a simple yet effective approach to resolve interfacial challenges in high-energy-density AFLMBs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Thermal Expansion and Ionic Conductivity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Promise and reality of post-lithium-ion batteries with high energy densities10.1038/natrevmats.2016.13 ↗
2. Investigation the degradation mechanisms of lithium-ion batteries under low-temperature high-rate cycling10.1021/acsaem.2c00957 ↗
3. A review of rechargeable batteries for portable electronic devices10.1002/inf2.12000 ↗
4. Electrical energy storage for the grid: a battery of choices10.1126/science.1212741 ↗
5. Lithium plating on the anode for lithium-ion batteries during long-term low temperature cycling10.1016/j.jpowsour.2020.229312 ↗
6. Nonlinear health evaluation for lithium-ion battery within full-lifespan10.1016/j.jechem.2022.04.013 ↗
7. Fast charging of energy-dense lithium-ion batteries10.1038/s41586-022-05281-0 ↗
8. "Water-in-salt" electrolyte enables high-voltage aqueous lithium-ion chemistries10.1126/science.aab1595 ↗
9. Reviving the lithium metal anode for high-energy batteries10.1038/nnano.2017.16 ↗
10. Toward safe lithium metal anode in rechargeable batteries: a review10.1021/acs.chemrev.7b00115 ↗
11. Pathways for practical high-energy long-cycling lithium metal batteries10.1038/s41560-019-0338-x ↗
12. Status and challenges in enabling the lithium metal electrode for high-energy and low-cost rechargeable batteries10.1038/s41560-017-0047-2 ↗
13. Reconstruction of the solid electrolyte interphase through an In-Situ periodic healing strategy in anode-free lithium metal batteries10.1021/acsenergylett.5c00661 ↗
14. Functional binary and ternary nanocomposites based on spinels: composition-structure-microwave properties10.1016/j.jics.2025.101902 ↗
15. Effect of the size factor on the magnetic properties of manganite La0.50Ba0.50MnO310.1134/S1063783408050144 ↗
16. Long cycle life and dendrite-free lithium morphology in anode-free lithium pouch cells enabled by a dual-salt liquid electrolyte10.1038/s41560-019-0428-9 ↗
17. Diagnosing and correcting anode-free cell failure via electrolyte and morphological analysis10.1038/s41560-020-0668-8 ↗
18. Molecular design for electrolyte solvents enabling energy-dense and long-cycling lithium metal batteries10.1038/s41560-020-0634-5 ↗
19. High-energy long-cycling all-solid-state lithium metal batteries enabled by silver-carbon composite anodes10.1038/s41560-020-0575-z ↗
20. Anode-Free rechargeable lithium metal batteries10.1002/adfm.201602353 ↗
21. Anode-Free full cells: a pathway to high-energy density lithium-metal batteries10.1002/aenm.202000804 ↗
22. A high-energy-density and long-life initial-anode-free lithium battery enabled by a Li2O sacrificial agent10.1038/s41560-021-00839-0 ↗
23. Quantifying inactive lithium in lithium metal batteries10.1038/s41586-019-1481-z ↗
24. Uniform nucleation of lithium in 3D Current collectors via bromide intermediates for stable cycling lithium metal batteries10.1021/jacs.8b10488 ↗
25. Lithiated NiCo2O4 nanorods anchored on 3D nickel foam enable homogeneous Li Plating/Stripping for high-power dendrite-free lithium metal anode10.1021/acsami.9b08438 ↗
26. Improving Lithium metal composite anodes with seeding and pillaring effects of silicon nanoparticles10.1021/acsnano.0c00184 ↗
27. Constructing stable solid electrolyte interphases to enhance the calendar life of anode-free lithium metal batteries10.1016/j.cej.2024.156296 ↗
28. J. Kim, I. Jung, K. Lee, I. Hwang, M. Kim, E. Park, D. Park, H. Park, Y. Jeon, G. Park, H.C. Ahn, J. Oh, J. Park, A. Coskun, J.W. Choi, Resolving oxidative and corrosive calendar-aging via electrolyte engineering for stable lithium metal batteries, Adv. Energy Mater., n/a e04147.
29. Effect of aging temperature on thermal stability of lithium-ion batteries: part A – High-temperature aging10.1016/j.renene.2022.12.092 ↗
30. Research on the impact of high-temperature aging on the thermal safety of lithium-ion batteries10.1016/j.jechem.2023.08.040 ↗
31. Effect of temperature on the aging rate of Li ion battery operating above room temperature10.1038/srep12967 ↗
32. Measurement of transference numbers for lithium ion electrolytes via four different methods, a comparative study10.1016/j.electacta.2011.02.025 ↗
33. The role of concentration in electrolyte solutions for non-aqueous lithium-based batteries10.1038/s41467-022-32794-z ↗
34. Unveiling the effect and correlative mechanism of series-dilute electrolytes on lithium metal anodes10.1016/j.ensm.2023.01.001 ↗
35. How properly are we interpreting the Tafel lines in energy conversion electrocatalysis?
36. Defective interface customizes anion-aggregated helmholtz plane for anode-less lithium metal batteries10.1021/acsnano.5c11246 ↗
37. Adaptive multi-site gradient adsorption of siloxane-based protective layers enable high performance lithium-metal batteries10.1002/aenm.202302577 ↗
38. Developing multifunctional amide additive by rational molecular design for high-performance Li metal batteries10.1016/j.nanoen.2023.108547 ↗
39. Accurate determination of coulombic efficiency for lithium metal anodes and lithium metal batteries10.1002/aenm.201702097 ↗
40. Nucleation mechanism and substrate modification of lithium metal anode
41. Dual additives for stabilizing Li deposition and SEI Formation in Anode-Free Li-Metal batteries10.1002/eem2.12642 ↗
42. A growing appreciation for the role of LiF in the solid electrolyte interphase10.1002/aenm.202100046 ↗
43. The Versatile establishment of charge storage in polymer solid electrolyte with enhanced charge transfer for LiF-Rich SEI generation in Lithium metal batteries
44. Electroless Formation of a fluorinated Li/Na hybrid interphase for robust lithium anodes10.1021/jacs.0c12051 ↗
45. Making Li-metal electrodes rechargeable by controlling the dendrite growth direction10.1038/nenergy.2017.83 ↗
46. Stable cycling and uniform lithium deposition in anode-free lithium-metal batteries enabled by a high-concentration dual-salt electrolyte with high LiNO3 content10.1016/j.jpowsour.2021.229504 ↗