journal article·2026-10Open access

Solvation-guided inhibition of manganese dissolution of lithium- and manganese- rich cathode via cyclic carbonate molecular engineering

Qijia Zhu, Jiayi Xu, Cong Liu, Wei Jiang, Jing Wang, Zhenzhen Yang, Jingtian Yang, Seoung-Bum Son, Qian Liu, Tao Xu, Zhengcheng Zhang

Abstract

Lithium and manganese-rich (LMR) layered oxides represent a leading class of high-energy cathode materials, but their practical realization is fundamentally limited by severe manganese (Mn) dissolution, a process that triggers structural degradation and rapid capacity fade. While mitigation efforts have predominantly focused on interfacial engineering, the intrinsic contribution of bulk electrolyte solvation to this degradation pathway remains largely unexplored, primarily due to the difficulty of deconvolving its effects from concurrent cathode-electrolyte interphase (CEI) formation. Here, we report an experimental design to isolate the role of solvation. We systematically varied the electrolyte solvent solvation power by substituting the strongly coordinating ethylene carbonate (EC) with its weaker coordinating fluorinated derivatives, fluoroethylene carbonate (FEC) and trans-4,5-Difluoro-1,3-dioxolan-2-one (DFEC), while maintaining a consistent interfacial chemistry. Remarkably, the electrolyte formulated with the weakest solvent, DFEC, exhibits superior cycling stability, suppressing Mn dissolution by up to 63% relative to the conventional EC-based system. Post-mortem analysis unequivocally attributes this performance enhancement to the preservation of the LMR cathode's structural integrity, a direct consequence of mitigated Mn dissolution. This work provides conclusive evidence that modulating bulk electrolyte solvation is a potent and direct strategy for stabilizing LMR cathodes, establishing a vital design principle for next-generation battery systems.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: CO2 Reduction Techniques and Catalysts · Metal-Catalyzed Oxygenation Mechanisms · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. A reflection on lithium-ion battery cathode chemistry10.1038/s41467-020-15355-0 ↗
2. A review on progress of lithium-rich manganese-based cathodes for lithium ion batteries10.1016/j.jpowsour.2020.229362 ↗
3. Unlocking the ultra-high capacity and cost-effectiveness of cobalt-free lithium-rich cathode materials
4. A review of high-capacity lithium-rich manganese-based cathode materials for a new generation of lithium batteries10.1016/j.ica.2024.122239 ↗
5. Review on challenges and recent advances in the electrochemical performance of high capacity Li- and Mn-Rich cathode materials for Li-Ion batteries10.1002/aenm.201702397 ↗
6. Multiscale factors in designing alkali-ion (Li, Na, and K) transition metal inorganic compounds for next-generation rechargeable batteries10.1039/D0EE01277G ↗
7. Transition metal dissolution, ion migration, electrocatalytic reduction and capacity loss in lithium-ion full cells10.1149/2.1111702jes ↗
8. Dissolution, migration, and deposition of transition metal ions in Li-ion batteries exemplified by Mn-based cathodes – a critical review10.1039/C7EE03122J ↗
9. Dynamics of transition metal dissolution and cross-contamination in operating lithium-ion batteries10.1016/j.jpowsour.2024.236031 ↗
10. Development of manganese-rich cathodes as alternatives to nickel-rich chemistries10.1016/j.jpowsour.2019.226706 ↗
11. Beyond composition: surface reactivity and structural arrangement of the cathode–electrolyte interphase10.1021/acsenergylett.3c01529 ↗
12. Inhibition of transition metals dissolution in cobalt-free cathode with ultrathin robust interphase in concentrated electrolyte10.1038/s41467-020-17396-x ↗
13. Positive electrode passivation by LiDFOB electrolyte additive in high-capacity lithium-ion cells10.1149/2.083212jes ↗
14. Mitigating transition metal dissolution from Mn-rich cathodes: influence of processing and testing methods10.1149/1945-7111/add4a5 ↗
15. Elucidating the impact of metal doping in Li1.15(Ni0.35Mn0.65)0.85O2 cathodes using high-throughput experiments and machine learning10.1039/D4EB00016A ↗
16. Influence of electrolyte additives on interfacial stability of manganese-rich lithium-ion battery cathodes10.1021/acsaem.5c00862 ↗
17. In‐Situ CEI layer fabricated by multifunctional carboxylate additive enabling the reversible jahn–teller distortion in manganese oxides10.1002/adfm.202512344 ↗
18. Constructing a stable interface film on both cathode and anode via a novel electrolyte additive for high performance LiNi0.8Co0.1Mn0.1O2/graphite pouch cell10.1016/j.jpowsour.2024.234055 ↗
19. Correlation between manganese dissolution and dynamic phase stability in spinel-based lithium-ion battery10.1038/s41467-019-12626-3 ↗
20. Lithium batteries and cathode materials10.1021/cr020731c ↗
21. The solvation structure, transport properties and reduction behavior of carbonate-based electrolytes of lithium-ion batteries10.1039/D1SC04265C ↗
22. Modified cathode-electrolyte interphase toward high-performance batteries
23. On leakage Current measured at high cell voltages in lithium-ion batteries10.1149/2.1341702jes ↗
24. Paramagnetic relaxation enhancement NMR as a tool to probe guest binding and exchange in metallohosts10.1038/s41467-022-29406-1 ↗
25. Understanding the degradation mechanisms of LiNi0.5Co0.2Mn0.3O2 cathode material in lithium ion batteries10.1002/aenm.201300787 ↗
26. Correlation between dissolution behavior and electrochemical cycling performance for LiNi1/3Co1/3Mn1/3O2-based cells10.1016/j.jpowsour.2012.01.122 ↗
27. Origin of structural degradation in Li-rich layered oxide cathode10.1038/s41586-022-04689-y ↗
28. Intragranular cracking as a critical barrier for high-voltage usage of layer-structured cathode for lithium-ion batteries10.1038/ncomms14101 ↗
29. Unraveling transition metal dissolution of Li1.04Ni1/3Co1/3Mn1/3O2 (NCM 111) in lithium ion full cells by using the total reflection X-ray fluorescence technique10.1016/j.jpowsour.2016.08.099 ↗
30. Scalable molecular dynamics with NAMD10.1002/jcc.20289 ↗
31. Automated force field parameterization for nonpolarizable and polarizable atomic models based on Ab initio target data10.1021/ct4003477 ↗
32. Accelerating convergence of free energy computations with hamiltonian simulated annealing of solvent (HSAS)10.1021/acs.jctc.8b01147 ↗
33. 2016
34. Density‐functional thermochemistry. III. The role of exact exchange10.1063/1.464913 ↗
35. Development of the colle-salvetti correlation-energy formula into a functional of the electron density10.1103/PhysRevB.37.785 ↗
36. Accurate spin-dependent electron liquid correlation energies for local spin density calculations: a critical analysis10.1139/p80-159 ↗
37. Ab initio calculation of vibrational absorption and circular dichroism spectra using density functional force fields10.1021/j100096a001 ↗
38. Methods of electronic structure theory
39. Ab initio effective core potentials for molecular calculations. Potentials for the transition metal atoms Sc to Hg10.1063/1.448799 ↗
40. Ab initio effective core potentials for molecular calculations. Potentials for main group elements Na to Bi10.1063/1.448800 ↗
41. Ab initio effective core potentials for molecular calculations. Potentials for K to Au including the outermost core orbitals10.1063/1.448975 ↗
42. Universal solvation model based on solute electron density and on a continuum model of the solvent defined by the bulk dielectric constant and atomic surface tensions10.1021/jp810292n ↗