Inhomogeneous volume expansion in phosphorus anodes for sodium-ion batteries revealed by X-ray computed tomography
Source abstract
Abstract
Black phosphorus is a promising high-capacity anode for sodium-ion batteries, but its volume expansion during sodiation can trigger mechanical failure. Here, pure black phosphorus electrodes are compared with black phosphorus carbon composite (1:1) electrodes to connect electrochemical behavior with electrode-scale deformation and loss of electrical contact. The pure black phosphorus electrode delivers an initial sodiation capacity of 2210 mAh g −1 but fails after the first cycle, showing delamination from the current collector, increased cell resistance, and negligible reversible capacity (∼13 mAh g −1 ). In contrast, the composite shows initial sodiation and desodiation capacities of 1010 and 847 mAh g −1 , remains attached, and sustains reversible cycling. Using X-ray computed tomography in a tomography cell, the electrode-scale volume expansion and spatial distribution after one cycle were quantified in detail. The pure black phosphorus electrode expands by 65.5% and forms a blunt-hill shape, while the composite expands by 33% with a doughnut-like pattern that redistributes volume expansion more uniformly across the electrode. These results clearly show that carbon composites mitigate mechanical degradation and reduce the mechanical burden on the counter electrode, highlighting electrode-scale volume changes as a key design constraint for alloy anodes and offering a pathway towards more dimensionally stable sodium-ion batteries.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Metallurgical and Alloy Processes · X-ray Diffraction in Crystallography
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Sodium-ion batteries: present and future10.1039/C6CS00776G ↗
2. Recent progress in electrode materials for sodium‐ion batteries10.1002/aenm.201600943 ↗
3. Approaching high-performance potassium-ion batteries via advanced design strategies and engineering10.1126/sciadv.aav7412 ↗
4. Recent developments in electrode materials for potassium-ion batteries10.1039/C8TA10953B ↗
5. Recent advances in polymer electrolytes for zinc ion batteries: mechanisms, properties, and perspectives10.1002/aenm.201903977 ↗
6. Advances in aqueous zinc ion batteries based on conversion mechanism: challenges, strategies, and prospects10.1002/smll.202310972 ↗
7. The modulation of adsorption balance effect for promoting selenium cathode redox reaction kinetics in aqueous Zinc-Selenium battery10.1016/j.ensm.2025.104604 ↗
8. Aluminium-ion batteries: developments and challenges10.1039/C7TA00228A ↗
9. Trends in aluminium‐based intercalation batteries10.1002/aenm.201602093 ↗
10. Phosphorus‐based materials as the anode for sodium‐ion batteries10.1002/smtd.201700216 ↗
11. A review of phosphorus and phosphides as anode materials for advanced sodium-ion batteries10.1039/C9TA12169B ↗
12. Recent developments of phosphorus-based anodes for sodium ion batteries10.1039/C8TA08774A ↗
13. Advanced phosphorus‐based materials for lithium/sodium‐ion batteries: recent developments and future perspectives
14. Phosphorus‐based materials for high‐performance alkaline metal ion batteries: progress and prospect10.1002/smll.202201808 ↗
15. Phosphorus–carbon nanocomposite anodes for lithium-ion and sodium-ion batteries10.1039/C4TA06186A ↗
16. Challenges and prospects of phosphorus‐based anode materials for secondary batteries10.1002/batt.202300265 ↗
17. An amorphous red phosphorus/carbon composite as a promising anode material for sodium ion batteries10.1002/adma.201204877 ↗
18. A phosphorene–graphene hybrid material as a high-capacity anode for sodium-ion batteries10.1038/nnano.2015.194 ↗
19. Room-temperature pressure synthesis of layered black phosphorus–graphene composite for sodium-ion battery anodes10.1021/acsnano.8b03615 ↗
20. Sodiation and desodiation via helical phosphorus intermediates in high-capacity anodes for sodium-ion batteries10.1021/jacs.8b04183 ↗
21. Functionalized few-layer black phosphorus with super-wettability towards enhanced reaction kinetics for rechargeable batteries10.1016/j.nanoen.2017.09.002 ↗
22. Bridging nano-and microscale X-ray tomography for battery research by leveraging artificial intelligence10.1038/s41565-022-01081-9 ↗
23. Dynamics of the morphological degradation of Si‐based anodes for Li‐ion batteries characterized by in situ synchrotron X‐ray tomography10.1002/aenm.201803947 ↗
24. Probing three-dimensional sodiation–desodiation equilibrium in sodium-ion batteries by in situ hard X-ray nanotomography10.1038/ncomms8496 ↗
25. Characterization of the 3-dimensional microstructure of a graphite negative electrode from a Li-ion battery10.1016/j.elecom.2009.12.038 ↗
26. Exploring 3D microstructural evolution in Li-Sulfur battery electrodes using in-situ X-ray tomography10.1038/srep35291 ↗
27. Resolving Li‐ion battery electrode particles using rapid lab‐based X‐ray nano‐computed tomography for high‐throughput quantification10.1002/advs.202000362 ↗
28. In-operando X-ray tomography study of lithiation induced delamination of Si based anodes for lithium-ion batteries10.1149/2.0081407eel ↗
29. Preparation of black phosphorus single crystals by a completely closed bismuth-flux method and their crystal morphology10.1143/JJAP.28.1019 ↗
30. Structural and electrical irregularities caused by selected dopants in black-phosphorus10.1149/2.0061611jss ↗
31. High capacity potassium-ion battery anodes based on black phosphorus10.1039/C7TA02483E ↗
32. Advanced dual‐ion batteries with high‐capacity negative electrodes incorporating black phosphorus10.1002/advs.202201116 ↗
33. Sodium quasi‐intercalation in black P for superior sodium‐ion battery anodes10.1002/batt.202000188 ↗
34. Phosphorus: an anode of choice for sodium-ion batteries10.1021/acsenergylett.8b00312 ↗
35. Spam: software for practical analysis of materials10.21105/joss.02286 ↗
36. Ilastik: interactive machine learning for (bio) image analysis10.1038/s41592-019-0582-9 ↗
37. Mechanical properties of a battery separator under compression and tension10.1149/2.0191411jes ↗
38. Designing polyolefin separators to minimize the impact of local compressive stresses on lithium ion battery performance10.1149/2.0041809jes ↗
39. Mechanical shutdown of battery separators: silicon anode failure10.1038/s41467-024-54313-y ↗
40. 25th anniversary article: understanding the lithiation of silicon and other alloying anodes for lithium‐ion batteries10.1002/adma.201301795 ↗
41. Progress, challenges, and perspectives on alloy-based anode materials for lithium ion battery: a mini-review10.1021/acs.energyfuels.4c03023 ↗
42. High‐performance and low‐cost sodium‐ion anode based on a facile black phosphorus− carbon nanocomposite10.1002/celc.201700345 ↗
43. First principles investigation of dynamic performance in the process of lithium intercalation into black phosphorus
44. Direct visualization and mechanistic insights into initial lithium plating in anode-free lithium metal batteries10.1039/D5EE01956G ↗
45. How reliable is coin-cell-based ranking of Li anode Coulombic efficiency?10.1016/j.joule.2025.101963 ↗
46. In-situ obtained internal strain and pressure of the cylindrical Li-ion battery cell with silicon-graphite negative electrodes10.1016/j.est.2021.103049 ↗
47. Experimental study on distributed measurement of internal pressure in lithium-ion batteries using thin-film sensors10.3390/wevj16050270 ↗