journal article·2026-10

Evaporation–thermophoresis competition governs binder distribution in lithium-ion battery electrodes: Multiphysics modeling and experimental validation

Jiayi Dai, Qiuyang Zhao, Shuoyu Zhang, Wentao Ding, Yechun Wang, Tengyu Li, Junjie Lu, Liejin Guo

Publisher page

Abstract

The drying stage of lithium-ion battery electrodes presents a fundamental trade-off between manufacturing efficiency and electrode quality, as rapid solvent evaporation often induces binder surface enrichment and mechanical degradation. Here, a one-dimensional multiphysics model is developed to elucidate binder migration in lithium iron phosphate electrodes under infrared–convective drying. By capturing the competition between upward evaporation-driven convection and downward thermophoretic transport induced by radiative volumetric heating, the model reveals a functionally graded binder distribution characterized by simultaneous enrichment at both the surface and the current collector interface. This bidirectional profile is quantitatively validated by energy-dispersive spectroscopy. The dynamically balanced mass transfer enables a porous surface structure for efficient ion transport while forming a robust anchoring layer at the interface. Consequently, infrared–convective drying strategy shortens the drying time by 74% to 109 s compared to conventional hot air drying. The reconstructed microstructure induces a transition in failure mode from interfacial adhesion to cohesive failure, leading to a 5.5-fold increase in peel strength and reduced charge transfer resistance. These findings reveal the governing role of evaporation–thermophoresis competition in electrode microstructure formation and provide a mechanistic framework for designing high-efficiency drying processes toward mechanically robust and electrochemically favorable battery electrodes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. The Li-Ion rechargeable battery: a perspective10.1021/ja3091438 ↗
2. Electrical energy storage for the grid: a battery of choices10.1126/science.1212741 ↗
3. Empowering human progress through sustainable carbon materials
4. Current status and challenges for automotive battery production technologies10.1038/s41560-018-0130-3 ↗
5. Prospects for reducing the processing cost of lithium ion batteries10.1016/j.jpowsour.2014.11.019 ↗
6. A review of the design of advanced binders for high-performance batteries10.1002/aenm.202002508 ↗
7. Design of vacuum post-drying procedures for electrodes of lithium-ion batteries10.1002/batt.202100088 ↗
8. Wet-Processable binder in composite cathode for high energy density all-solid-state lithium batteries
9. Toward low-cost, high-energy density, and high-power density lithium-ion batteries10.1007/s11837-017-2404-9 ↗
10. Energy impact of cathode drying and solvent recovery during lithium-ion battery manufacturing10.1016/j.jpowsour.2016.04.102 ↗
11. Manufacturing energy analysis of lithium ion battery pack for electric vehicles10.1016/j.cirp.2017.04.109 ↗
12. Delamination behavior of lithium-ion battery anodes: influence of drying temperature during electrode processing10.1080/07373937.2015.1060497 ↗
13. Investigation of film solidification and binder migration during drying of Li-Ion battery anodes10.1016/j.jpowsour.2016.04.018 ↗
14. Binder migration during drying of lithium-ion battery electrodes: modelling and comparison to experiment10.1016/j.jpowsour.2018.04.097 ↗
15. Drying of lithium-ion battery anodes for use in high-energy cells: influence of electrode thickness on drying time, adhesion, and crack formation10.1002/ente.201900722 ↗
16. Numerical modeling and analysis of the binder migration behavior during the dual-layer electrode drying process10.1021/acs.iecr.3c04131 ↗
17. Binder migration: frequently observed yet overlooked phenomena in electrode processing for lithium-ion batteries10.1016/j.est.2024.110729 ↗
18. Ultra-high-energy lithium-ion batteries enabled by aligned structured thick electrode design10.1007/s12598-021-01785-2 ↗
19. Modeling and analysis of solvent removal during Li-ion battery electrode drying10.1016/j.jpowsour.2018.01.007 ↗
20. Critical electrode properties and drying conditions causing component segregation in graphitic anodes for lithium-ion batteries10.1016/j.est.2018.06.009 ↗
21. Application of multistage drying profiles for accelerated production of Li-Ion battery anodes using infrared radiation: validation with electrochemical performance and structural properties10.1002/ente.202301272 ↗
22. Drying kinetics of food materials in infrared radiation drying: a review10.1111/jfpe.13810 ↗
23. Modest · 2013 · 267
24. Thermophoresis in colloidal suspensions10.1088/0953-8984/20/15/153102 ↗
25. Thermophoretic effects on instabilities of nanoflows in porous media10.1017/jfm.2018.740 ↗
26. Why molecules move along a temperature gradient10.1073/pnas.0603873103 ↗
27. Current and future trends in lithium-ion battery electrode production machinery: a comprehensive review10.1016/j.apenergy.2025.126968 ↗
28. Current advances on laser drying of electrodes for lithium-ion battery cells10.1016/j.procir.2022.05.194 ↗
29. High-Speed laser drying of lithium-ion battery anodes: challenges and opportunities10.3390/wevj14090255 ↗
30. Migration of binder and conductive agent during drying process of Li-ion battery cathodes10.1016/j.jpowsour.2023.233883 ↗
31. Drying kinetics and electrochemical performance of lithium-ion battery coating under infrared-hot air combined drying
32. Study on infrared-hot air combined drying characteristics of lithium iron phosphate battery electrode10.1016/j.ijthermalsci.2025.110559 ↗
33. Drying of porous media by concurrent drainage and evaporation: a pore network modeling study10.1016/j.ijheatmasstransfer.2019.118718 ↗
34. Miller · 2022 · 377
35. Grain drying theory (I) temperature effect on drying coefficient
36. The rate of drying of solid materials
37. Page · 1949
38. Degirmencioglu · 1999
39. Adhesion strength of the cathode in lithium-ion batteries under combined tension/shear loadings10.1039/C7RA12382E ↗
40. Effect of binder properties on electrochemical performance for silicon-graphite anode: method and application of binder screening10.1016/j.electacta.2014.05.062 ↗
41. The mathematics of diffusion10.1021/ja01562a070 ↗
42. Sørensen · 2007 · vol. 20 · 400
44. Modeling evaporation and particle assembly in colloidal droplets10.1021/acs.langmuir.7b00284 ↗
45. Cooperation between active material, polymeric binder and conductive carbon additive in lithium ion battery cathode10.1021/jp208428w ↗
46. Measuring the coating adhesion strength of electrodes for lithium-ion batteries10.1016/j.ijadhadh.2015.03.002 ↗
47. Impact of electrode defects on battery cell performance: a review
48. Digital twin reveals the impact of carbon binder domain distribution on performance of lithium‐ion battery cathodes
49. Influence of the binder on lithium ion battery electrode tortuosity and performance10.1149/2.0971805jes ↗
50. A formula to customize cathode binder for Lithium ion battery10.1002/aenm.202401514 ↗
51. Measurement and analysis of adhesion property of lithium-ion battery electrodes with SAICAS10.1021/am404580f ↗
52. Three-Dimensional adhesion map based on surface and interfacial cutting analysis system for predicting adhesion properties of composite electrodes10.1021/acsami.6b06344 ↗
53. Surface and interfacial cutting analysis system for adhesive strength measurement in rechargeable lithium batteries10.1016/j.est.2026.120461 ↗
54. Effect of drying temperature on binder/current collector interfacial adhesion in electrode manufacturing of Li-ion batteries
55. The effect of crystalline microstructure of PVDF binder on mechanical and electrochemical performance of lithium-ion batteries cathode10.1515/zpch-2018-1343 ↗
56. Infrared drying-induced PVDF crystallinity control for enhanced lithium cobalt oxide cathodes10.1021/acsaem.5c03488 ↗