journal article·2026-10Open access

High performance Li-S batteries using cathodes produced with carbons derived from physically activated recycled surgical masks

Fernando Luna-Lama, Álvaro Bonilla, Eduardo M. Cuerda-Correa, Alvaro Y. Tesio, Álvaro Caballero, María F. Alexandre-Franco, Julián Morales

Abstract

Activated carbon derived from recycled, discarded surgical masks has been used as a sulfur host for lithium-sulfur (Li-S) batteries. The activation process was carried out using physical methods, which are simpler and cleaner than chemical approaches. Two activating agents, CO 2 and steam, were employed, with steam resulting in somewhat higher BET surface and pore volume, as well as better electrochemical performance, leading to a greater number of tests being carried out on this material. When mixed with sulfur (∼70%), the steam-activated carbon demonstrated outstanding electrochemical properties, including good rate capability (an average capacity ranging from 970 mAh g − 1 at 0.1C to 360 mAh g − 1 at 2C), high reversible capacity and impressive cycling stability (average capacity ∼850 mAh g − 1 at 0.3C after 400 cycles). It also showed good areal capacity values and high lithium-ion diffusion coefficients ( D Li + ). This study underscores the use of physical activation as a simple, clean, easy, and efficient alternative to improve the performance of carbons in high performance Li-S batteries.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
2. Pathways for practical high-energy long-cycling lithium metal batteries10.1038/s41560-019-0338-x ↗
3. Recent advances in lithium-ion battery materials for improved electrochemical performance: a review10.1016/j.rineng.2022.100472 ↗
4. Understanding the air-exposure degradation chemistry of the sacrificial cathode additive Li5FeO4 for Li-Ion batteries
5. Overcharge investigations of LiCoO2/Graphite lithium ion batteries with different electrolytes10.1021/acsaem.9b01520 ↗
6. Rechargeable lithium-sulfur batteries10.1021/cr500062v ↗
7. High-performance Li-S batteries boosted by redox mediators: a review and prospects
8. Carbon materials for Li-S batteries: functional evolution and performance improvement10.1016/j.ensm.2015.09.007 ↗
9. Recent advances in lithium-sulfur batteries using biomass-derived carbons as sulfur host10.1016/j.rser.2021.111783 ↗
10. Simple and sustainable preparation of nonactivated porous carbon from brewing waste for high-performance lithium–sulfur batteries10.1002/cssc.202000969 ↗
11. Valorisation of argan seeds: production of cathode material for high-performance lithium-sulphur batteries10.1016/j.est.2024.110518 ↗
12. Towards flexible lithium-sulfur battery from natural cotton textile10.1016/j.electacta.2017.06.069 ↗
13. Flexible and hierarchically structured sulfur composite cathode based on the carbonized textile for high-performance Li-S batteries10.1021/acsami.7b16174 ↗
14. Advanced thermosets from sulfur and renewable benzoxazine and ionones via inverse vulcanization10.1021/acssuschemeng.0c02773 ↗
15. Hierarchical porous N,S‐codoped carbon material derived from halogenated polymer for battery applications10.1002/nano.202000168 ↗
16. Upcycling of paper waste for high-performance lithium-sulfur batteries
17. Carbon aerogel based materials for secondary batteries
18. A new approach for recycling waste rubber products in Li-S batteries10.1039/C6EE02770A ↗
19. Polyurethane-derived N-doped porous carbon with interconnected sheet-like structure as polysulfide reservoir for lithium-sulfur batteries10.1016/j.jpowsour.2015.05.048 ↗
20. Composite sulfur cathode for Li-S batteries comprising hierarchical carbon obtained from waste PET bottles10.1016/j.synthmet.2020.116305 ↗
21. Hemicellulose-derived carbonaceous coated-carbon cloth as self-standing electrode materials for a zinc ion capacitor10.1021/acssuschemeng.5c11029 ↗
22. Study of energy valorization of disposable masks via thermochemical processes: devolatilization tests and simulation approach10.3390/en15062103 ↗
23. What 21we need to know about PPE associated with the COVID-19 pandemic in the marine environment10.1016/j.marpolbul.2020.111879 ↗
24. Self-activated pyrolytic synthesis of S, N and O co-doped porous carbon derived from discarded COVID-19 masks for lithium sulfur batteries10.1016/j.renene.2022.04.103 ↗
25. Discarded COVID-19 masks-derived-doped porous carbon for lithium-sulfur batteries10.1002/er.8733 ↗
26. Porous carbon materials derived from discarded COVID-19 masks via microwave solvothermal method for lithium-sulfur batteries10.1016/j.scitotenv.2022.152995 ↗
27. Methods for preparation and activation of activated carbon: a review10.1007/s10311-019-00955-0 ↗
28. Physical activation of graphene: an effective, simple and clean procedure for obtaining microporous graphene for high-performance Li/S batteries10.1007/s12274-019-2282-2 ↗
29. Lithium-sulfur batteries with activated carbons derived from olive stones10.1016/j.carbon.2014.01.002 ↗
30. Simple and eco-friendly fabrication of electrode materials and their performance in high-voltage lithium-ion batteries10.1002/cssc.201902586 ↗
31. An understanding of lattice strain, defects and disorder in nuclear graphite10.1016/j.carbon.2017.08.070 ↗
32. In situ raman spectroscopy of sulfur speciation in lithium-sulfur batteries10.1021/am5072942 ↗
33. Synergistic effect between PPy:PSS copolymers and biomass-derived activated carbons: a simple strategy for designing sustainable high-performance Li-S batteries10.1039/D1SE02052H ↗
34. Transforming waste polypropylene face masks into S-doped porous carbon as the cathode electrode for supercapacitors10.1007/s11581-021-03949-7 ↗
35. Role of chemical activation in the development of carbon porosity10.1016/j.colsurfa.2004.04.007 ↗
36. High specific surface area bimodal porous carbon derived from biomass reed flowers for high performance lithium-sulfur batteries10.1016/j.jcis.2020.02.062 ↗
37. Low-cost disordered carbons for Li/S batteries: a high-performance carbon with dual porosity derived from cherry pits10.1007/s12274-017-1608-1 ↗
38. Biomass-derived nitrogen-doped hierarchical porous carbon as efficient sulfur host for lithium–sulfur batteries10.1016/j.jechem.2019.09.004 ↗
39. Three-dimensional porous carbon composites containing high sulfur nanoparticle content for high-performance lithium-sulfur batteries
40. Moulder · 1992
41. Chemically modified self-doped biocarbon via novel sulfonation assisted sacrificial template method for high performance flexible all solid-state supercapacitor10.1016/j.jcis.2020.04.029 ↗
42. NiS2-MoS2@MXene heterostructures for enhancing polysulfide adsorption and conversion of Li–S battery
43. XPS spectra and electronic structure of group IA sulfates10.1016/j.elspec.2006.11.032 ↗
44. N, S codoping and mesoporous-induced capacitive storage enhancement in supercapacitor and improved Li–S battery performances of polystyrene waste-derived carbon electrode10.1002/ente.202201125 ↗
45. Current status and future perspectives of lithium metal batteries10.1016/j.jpowsour.2020.228803 ↗
46. Understanding and tuning the electrical conductivity of activated carbon: a state-of-the-art review10.1080/10408436.2019.1671800 ↗
47. Investigation of the self-discharge behavior of lithium-sulfur batteries10.1149/2.0641606jes ↗
48. Efficient polysulfide shuttle mitigation by graphene-lithium cobalt vanadate hybrid for advanced lithium-sulfur batteries10.1016/j.jelechem.2021.115665 ↗
49. Rational design of sulphur host materials for Li-S batteries: correlating lithium polysulphide adsorptivity and self-discharge capacity loss10.1039/C4CC08980D ↗
50. Single-dispersed polyoxometalate clusters embedded on multilayer graphene as a bifunctional electrocatalyst for efficient Li-S batteries10.1038/s41467-021-27866-5 ↗
51. Coupled effect of TiO2-x and N defects in pyrolytic waste plastics-derived carbon on anchoring polysulfides in the electrode of Li-S batteries10.1016/j.electacta.2022.139924 ↗
52. Polyaniline modified waste-derived graphene/sulfur nanocomposite cathode for lithium–sulfur batteries10.1002/pol.20220709 ↗
53. Lithium-metal batteries using sustainable electrolyte media and various cathode chemistries10.1021/acs.energyfuels.1c00927 ↗
54. High capacity semi-liquid lithium sulfur cells with enhanced reversibility for application in new-generation energy storage systems10.1016/j.jpowsour.2018.11.068 ↗
55. Nickel embedded porous macrocellular carbon derived from popcorn as sulfur host for high-performance lithium-sulfur batteries10.1016/j.jmst.2020.09.032 ↗
56. Energy storage system based on recycled polypropylene and its use in lithium-sulfur and lithium-ion batteries10.1021/acsapm.3c00688 ↗
57. Diffusional features of a lithium-sulfur battery exploiting highly microporous activated carbon
58. Synergy between highly dispersed Ni nanocrystals and graphitized carbon derived from a single source as a strategy for high performance lithium-sulfur batteries10.1016/j.jcis.2023.03.035 ↗
59. Designing a high-loading sulfur cathode with a mixed ionic-electronic conducting polymer for electrochemically stable lithium-sulfur batteries10.1016/j.ensm.2018.11.002 ↗
60. Sulfur/carbon binding with polar MoS3 as cathode materials for lithium-sulfur batteries