journal article·2026-10Open access

Flexibly fuelled reversible solid oxide cells based on ceria-nickel fuel electrodes support

Bernardo Jordão Moreira Sarruf, Kamil Maciej Nowicki, Aaron Benjamin Naden, John Thomas Sirr Irvine, Robert Steinberger-Wilckens

Abstract

High-temperature solid oxide electrolysis, including both steam and CO 2 electrolysis, shows strong promise for renewable fuel production thanks to its flexibility, modular design, and ability to utilise industrial waste heat, thereby enhancing overall efficiency. Its capability to operate reversibly further increases its value for energy transition applications, particularly in the storage and transport of sustainable fuels. This study focuses on developing an electrode material for reversible solid oxide cells that can preserve active nickel catalytic sites even under highly oxidising conditions typical of steam and CO 2 electrolysis. The electrodes support, composed of nickel as the catalyst and ceria as an oxygen buffer, was fabricated through co-sintering. It demonstrated effective performance in fuel-cell mode with internal methane reforming, reaching power densities up to 0.71 W cm −2 . During steam electrolysis, current densities of −2.67 A cm −2 were achieved at 775°C under thermoneutral conditions. In co-electrolysis mode, it reached −0.56 A cm −2 at 1.30 V and 750°C. Thermal analysis indicated safe operation up to 750°C due to changes in expansion behaviour at higher temperatures. These results highlight ceria's role in maintaining oxygen vacancies and mixed conductivity, supported by X-ray photoelectron spectroscopy and microstructural analysis showing enhanced triple-phase boundary formation.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Catalytic Processes in Materials Science · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Solid oxide fuel cell technology-features and applications10.1016/j.ssi.2004.07.042 ↗
2. Singhal · 2003
4. Evaluation of carbon deposition behavior on the nickel/yttrium-stabilized zirconia anode-supported fuel cell fueled with simulated syngas10.1016/j.jpowsour.2010.11.095 ↗
5. Ceria-Co-Cu-based SOFC anode for direct utilisation of methane or ethanol as fuels10.1016/j.ijhydene.2019.04.075 ↗
6. Evaluation of electrochemical performance and carbon deposition behaviour of Sn, Ag, Cu, Fe-doped Ni/ScCeSZ anode solid oxide fuel cells operated with simulated biogas10.1016/j.cej.2025.159392 ↗
7. A review of high temperature co-electrolysis of H2O and CO2 to produce sustainable fuels using solid oxide electrolysis cells (SOECs): advanced materials and technology10.1039/C6CS00403B ↗
8. Review of factors affecting the performance degradation of Ni-YSZ fuel electrodes in solid oxide electrolyzer cells10.1016/j.jpowsour.2024.234651 ↗
9. Oxidation of nickel in solid oxide cells during electrochemical operation: experimental evidence, theoretical analysis, and an alternative hypothesis on the nickel migration10.1016/j.jpowsour.2023.232991 ↗
10. Solid oxide electrolysis cells - current material development and industrial application10.1039/D3TA02161K ↗
11. Carbon deposition in solid oxide cells during Co-Electrolysis of H2O and CO210.1149/2.079403jes ↗
12. A novel electrode with multifunction and regeneration for highly efficient and stable symmetrical solid oxide cell10.1016/j.jpowsour.2020.228620 ↗
13. Progress and potential for symmetrical solid oxide electrolysis cells10.1016/j.matt.2021.11.013 ↗
14. Self-transforming configuration based on atmospheric-adaptive materials for solid oxide cells10.1038/s41598-018-35659-y ↗
15. Yttria modified ZrO2 supported Ni catalysts for CO2 reforming of methane: the role of Ce promoter10.1021/acsomega.0c04731 ↗
16. Performance enhancement of Ni-YSZ electrode by impregnation of Mo0.1Ce0.9O2+δ10.1016/j.jpowsour.2012.01.019 ↗
17. Improving the degradation behaviour and coking resistance of solid oxide fuel cells via surface modification using wet impregnation of metallic solutions10.1016/j.ijhydene.2025.01.332 ↗
18. Water-based 8YSZ electrolyte suspension optimised by design of experiments
19. Effect of La2O3 addition and sintering mode on the mechanical properties and microstructural evolution on an 8YSZ ceramic alloy10.1016/j.ceramint.2018.11.028 ↗
20. Preparation of gadolinium-doped ceria barrier layer for intermediate temperature solid oxide fuel cells by spin coating and evaluation of performance degradation by impedance analysis10.1016/j.ceramint.2024.04.046 ↗
21. Quantification of SOFC anode microstructure based on dual beam FIB-SEM technique10.1016/j.jpowsour.2009.09.005 ↗
22. KherveFitting: an open source software for fitting X-Ray photoelectron spectroscopy data10.1002/sia.70032 ↗
23. Interdiffusion between gadolinia doped ceria and yttria stabilized zirconia in solid oxide fuel cells: experimental investigation and kinetic modeling10.1016/j.jpowsour.2019.227152 ↗
24. Accelerated ceria-zirconia solubilization by cationic diffusion inversion at low oxygen activity10.1039/C6TA06308J ↗
25. Quantitative relationships between composition, particle size, triple phase boundary length and surface are in nickel-cermet anodes for solid oxide fuel cells10.1016/j.jpowsour.2010.08.006 ↗
26. Strategic defect engineering in ceria interlayer for high-performing solid oxide electrochemical cells
27. Single-atom Pt-doped ceria nanozymes mitigate myocardial ischemia reperfusion injury via cardiomyocyte-targeted uptake and suppression of reactive oxygen species
28. Integrated fabrication and synergistic electrocatalysis of ceria and surface-oxygen-rich carbon for high-performance oxygen reduction toward hydrogen peroxide
29. Interpretation of oxygen 1s X-ray photoelectron spectroscopy of ZnO10.1021/acs.chemmater.3c00801 ↗
30. A redox-stable efficient anode for solid-oxide fuel cells10.1038/nmat871 ↗
31. The influence of redox reaction of the sintering of cerium oxide10.1023/A:1021833022868 ↗
32. Grain boundary co-segregation of B and Ce hindering the precipitates of S31254 super austenitic stainless steel10.1016/j.jmrt.2023.03.135 ↗
33. Inhibition of grain growth by a Ce-rich precipitate during the annealing of spray-casted magnesium alloy
34. High temperature electrolysis in alkaline cells, solid proton conducting cells, and solid oxide cells10.1021/cr5000865 ↗
35. Efficient syngas generation for electricity storage through carbon gasification assisted solid oxide co-electrolysis10.1016/j.apenergy.2016.03.116 ↗
36. A novel solid oxide electrolysis cell with Micro‐/Nano channel anode for electrolysis at ultra‐high current density over 5 A cm−2
37. Nanocomposite electrodes for high current density over 3 A cm−2 in solid oxide electrolysis cells10.1038/s41467-019-13426-5 ↗
38. Interface modification of Ru-CeO2 co-infiltrated SFM electrode and construction of SDC/YSZ bilayer electrolyte for direct CO2 electrolysis10.1016/j.electacta.2022.140771 ↗
39. Recent highlights on solid oxide cells, stacks and modules developments at CEA10.1149/11106.1101ecst ↗
40. B-Site fe–co–ni triple doping for high-performance oxygen electrodes in industrial-sized reversible solid oxide cells
41. A high-entropy composite air electrode with dual-phase exsolution for efficient reversible proton ceramic cells10.1002/adfm.74663 ↗