Separation of water and oxygen pathways in microporous layer coated gas diffusion layers to reduce oxygen transport resistance of polymer electrolyte fuel cells
Source abstract
Abstract
Reducing the oxygen transport resistance is essential for enhanced performance of polymer electrolyte fuel cells (PEFCs) operating at high current densities. Increasing the porosity of the microporous layer (MPL) coated gas diffusion layer (GDL) is effective for reducing the oxygen transport resistance. The premixed method, in which pore former (PF) particles are directly added to a hydrophobic MPL slurry, is commonly used to increase the MPL porosity. However, the appropriate PF-MPL preparation method, PF content, and wettability are not clarified. In the present study, a novel preparation method, in which a PF slurry and a hydrophobic slurry are separately mixed, is developed to independently generate large pores for water pathways and small pores for oxygen transport pathways. These controlled pore structures result in lower oxygen transport resistance than premixed PF-MPLs. Adding hydrophilic TiO 2 particles to the PF slurry reduces the water breakthrough pressure, which enhances the water removal ability through the large pores and further reduces the pressure-independent oxygen transport resistance. Adding small-sized PF particles to the hydrophobic slurry increases the porosity of the small pores. This reduces the pressure-dependent oxygen transport resistance, resulting in a further reduction in the oxygen transport resistance.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fuel Cells and Related Materials · Advancements in Solid Oxide Fuel Cells · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (73)
Show source-provided references
1. 2016
2. Mench · 2008
3. Gas diffusion layer modifications and treatments for improving the performance of proton exchange membrane fuel cells and electrolysers: a review10.1016/j.ijhydene.2017.09.132 ↗
4. A review of the microporous layer in proton exchange membrane fuel cells: materials and structural designs based on water transport mechanism10.1016/j.rser.2021.111998 ↗
5. Investigation of liquid water accumulation in operating PEM fuel cells with/without MPL and its effect on cell performance10.1149/05801.0337ecst ↗
6. Microporous layer in proton exchange membrane fuel cells: advancement in materials and properties10.1016/j.jece.2024.114220 ↗
7. A review of gas diffusion layers for proton exchange membrane fuel cells—With a focus on characteristics, characterization techniques, materials and designs10.1016/j.pecs.2019.05.002 ↗
8. Recent progress of the gas diffusion layer in proton exchange membrane fuel cells: material and structure designs of microporous layer10.1016/j.ijhydene.2020.10.185 ↗
9. Progress and perspectives on gas diffusion layers for proton exchange membrane fuel cells with high power density: from structural engineering to component integration10.1039/D5SE00552C ↗
10. Microporous layer coated gas diffusion layers for enhanced performance of polymer electrolyte fuel cells10.1016/j.jpowsour.2009.10.089 ↗
11. Electrospun fabrication and experimental characterization of highly porous microporous layers for PEM fuel cells10.1016/j.ijhydene.2023.11.226 ↗
12. Optimisation and characterisation of graphene-based microporous layers for polymer electrolyte membrane fuel cells10.1016/j.ijhydene.2023.05.003 ↗
13. Heterogeneous through-plane porosity distributions for treated PEMFC GDLs. II. Effect of MPL cracks
14. An overview of cracks and interfacial voids in membrane electrode assemblies in polymer electrolyte fuel cells10.1299/jtst.2015jtst0002 ↗
15. Effect of perforated cracks on liquid water in microporous layers by lattice Boltzmann method10.1016/j.renene.2023.119900 ↗
16. Liquid transport in gas diffusion layer of proton exchange membrane fuel cells: effects of micro-porous layer cracks10.1016/j.ijhydene.2021.11.248 ↗
17. Soft X-ray visualization of the liquid water transport within the cracks of micro porous layer in PEMFC10.1016/j.elecom.2011.03.033 ↗
18. Coupled continuum and network model framework to study catalyst layers of polymer electrolyte fuel cells10.1016/j.ijhydene.2022.03.266 ↗
19. Water cluster characteristics of fuel cell gas diffusion layers with artificial microporous layer crack dilation10.1016/j.jpowsour.2022.232383 ↗
20. On the importance of MPL structural characteristics for PEM fuel cell performance10.1149/11204.0135ecst ↗
21. Effect of through-plane polytetrafluoroethylene distribution in gas diffusion layers on performance of proton exchange membrane fuel cells10.1016/j.jpowsour.2015.12.020 ↗
22. Effect of PTFE concentration in PPS based microporous layer hydrophobic agents on the electrochemical characteristics of PEMFCs10.1149/1945-7111/adccfe ↗
23. Numerical simulation of liquid water behavior in PEFCs with different GDL wettability10.1149/11204.0037ecst ↗
24. Performance improvement of polymer electrolyte membrane fuel cell by gas diffusion layer with atomic-layer-deposited HfO2 on microporous layer10.1016/j.enconman.2021.114070 ↗
25. Polytetrafluoroethylene-coated carbon nanotube sheet as superhydrophobic microporous layer for polymer electrolyte membrane fuel cells10.1016/j.ijhydene.2025.151708 ↗
26. Effect of calcination temperature on hydrophobicity of microporous layers prepared with two different molecular weights of PDMS polymer on PEM fuel cell performance with low Pt loading10.1016/j.ijhydene.2016.11.041 ↗
27. Facilitation of water management in low Pt loaded PEM fuel cell by creating hydrophobic microporous layer with PTFE, FEP and PDMS polymers: effect of polymer and carbon amounts10.1016/j.ijhydene.2017.06.202 ↗
28. Effect of preparative parameters on the characteristic of poly(vinylidene fluoride)-based microporous layer for proton exchange membrane fuel cells10.1016/j.jpowsour.2008.04.064 ↗
29. Influence of structural modification of micro‐porous layer and catalyst layer on performance and water management of PEM fuel cells: hydrophobicity and porosity10.1002/fuce.201900203 ↗
30. Hydrophobic diffusion media via electrografted organosilicons enable competitive performance in polymer electrolyte fuel cells10.1021/acselectrochem.5c00333 ↗
31. Neutron Tomographic investigation of the effect of hydrophobicity gradients within MPL and MEA on the spatial distribution and transport of liquid water in PEMFCs10.1149/08513.0927ecst ↗
32. Microporous layer-coated gas diffusion layer to reduce oxygen transport resistance in a polymer electrolyte fuel cell under high humidity conditions10.1016/j.ijhydene.2016.04.117 ↗
33. Optimization of hydrophobic additives content in microporous layer for air breathing PEMFC10.1016/j.jelechem.2023.117963 ↗
34. Pore-Scale liquid water visualization for understanding water transport in operating fuel cells10.1149/09208.0061ecst ↗
35. Effect of capillary pressure gradient in microporous layer on proton exchange membrane fuel cell performance10.1016/j.ijhydene.2022.03.265 ↗
36. The microporous layer in proton exchange membrane fuel cells, from transport mechanism to structural design10.1016/j.jpowsour.2023.233412 ↗
37. Investigation of effects of hydrophilic micro-porous layer on liquid water behavior by X-ray imaging10.1016/j.jpowsour.2021.230285 ↗
38. Hydrophilic and hydrophobic double microporous layer coated gas diffusion layer for enhancing performance of polymer electrolyte fuel cells under no-humidification at the cathode10.1016/j.jpowsour.2011.10.002 ↗
39. Novel hydrophilic and hydrophobic double microporous layer coated gas diffusion layer to enhance performance of polymer electrolyte fuel cells under both low and high humidity10.1016/j.jpowsour.2013.01.150 ↗
40. Effect of hydrophilic layer in double microporous layer coated gas diffusion layer on performance of a polymer electrolyte fuel cell10.1149/1945-7111/ad13da ↗
41. Hydrophilic microporous layer coatings for polymer electrolyte membrane fuel cells operating without anode humidification10.1016/j.jpowsour.2018.08.062 ↗
42. Gas diffusion layers coated with a microporous layer containing hydrophilic carbon nanotubes for performance enhancement of polymer electrolyte fuel cells under both low and high humidity conditions10.1016/j.jpowsour.2015.02.115 ↗
43. Mitigation of water management in PEM fuel cell cathodes by hydrophilic wicking microporous layers10.1002/fuce.201000003 ↗
44. Hydrophilic and hydrophobic composite microporous layer coated gas diffusion layers for performance enhancement of polymer electrolyte fuel cells
45. Hydrophilic and hydrophobic composite microporous layer coated gas diffusion layer to reduce oxygen transport resistance of polymer electrolyte fuel cell
46. Planar-distributed wettability of microporous layer of polymer electrolyte fuel cell to improve cold start performance10.1016/j.jpowsour.2019.226930 ↗
47. Interaction of pore size and Hydrophobicity/Hydrophilicity for improved oxygen and water transport through microporous layers10.1149/2.1111913jes ↗
48. Influence of pore-size distribution of diffusion layer on mass-transport problems of proton exchange membrane fuel cells10.1016/S0378-7753(02)00028-9 ↗
49. Improving water management in fuel cells through microporous layer modifications: fast operando tomographic imaging of liquid water10.1016/j.jpowsour.2019.226809 ↗
50. Laser perforated fuel cell diffusion media. Part I: related changes in performance and water content10.1016/j.jpowsour.2011.01.014 ↗
51. The influence of porous transport layer modifications on the water management in polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2013.01.085 ↗
52. Design and development of gas diffusion layers with pore forming agent for proton exchange membrane fuel cells at various relative humidity conditions10.1016/j.ijhydene.2020.11.187 ↗
53. Precisely engineered microporous layers for Proton exchange membrane fuel cells with high power density10.1021/acssuschemeng.2c07082 ↗
54. Optimizing gas diffusion layer perforation and microporous layer coverage for enhanced mass transport in proton exchange membrane fuel cells: a lattice Boltzmann study
55. Determination of the pore size distribution of micro porous layer in PEMFC using pore forming agents under various drying conditions10.1016/j.ijhydene.2010.07.056 ↗
56. Enhanced water management in PEMFCs: perforated catalyst layer and microporous layers10.1002/cssc.202000542 ↗
57. Microporous layers with different decorative patterns for polymer electrolyte membrane fuel cells10.1021/acsami.0c05416 ↗
58. Impact of microporous layer pore properties on liquid water transport in PEM fuel cells: carbon Black type and perforation10.1149/2.1321714jes ↗
59. Porosity-graded micro-porous layers for polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2007.01.021 ↗
60. Development of a porosity-graded micro porous layer using thermal expandable graphite for proton exchange membrane fuel cells10.1016/j.renene.2013.02.025 ↗
61. Effects of graded-porosity gas diffusion layers used in polymer electrolyte fuel cells10.1016/j.renene.2025.124282 ↗
62. Impact of porosity gradients within catalyst layer and MPL of a PEM fuel cell on the water management and performance: a neutron radiography investigation10.1149/09208.0135ecst ↗
63. Optimization of microporous layer perforation design for enhanced liquid water management in PEM fuel cells10.1016/j.ijheatmasstransfer.2024.126277 ↗
64. Structure majorization on the surface of microporous layer in polymer electrolyte membrane fuel cells to optimize performance and durability10.1016/j.enconman.2021.114319 ↗
65. Effects of clamp load on PEFC performance and over voltages (Comparison of contact pressure between paper and cloth type GDLs)
66. 1998
67. 1970 · F3vols. 16–86 · 722
68. An innovative technique for pore structure analysis of fuel cell and battery components using flow porometry10.1016/S0378-7753(00)00684-4 ↗
69. Water flow in the gas diffusion layer of PEM fuel cells10.1016/j.memsci.2005.03.049 ↗
70. Liquid water breakthrough pressure through gas diffusion layer of proton exchange membrane fuel cell10.1016/j.ijhydene.2014.03.238 ↗
71. Modeling two-phase water transport in hydrophobic diffusion media for PEM fuel cells10.1149/1.3551504 ↗
72. Measurement of oxygen transport resistance in PEM fuel cells by limiting Current methods10.1149/1.3152226 ↗
73. Analysis of oxygen-transport diffusion resistance in proton-exchange-membrane fuel cells10.1149/1.3546038 ↗