journal article·2026-10Open access

Mechanism and suppression of accelerated winding collapse in mechanically deformed lithium-ion batteries during cycling

Ling Li, Shijia Xu, Guorui Zhao, Xiaoping Chen

Abstract

Minor mechanical deformation can significantly accelerate performance degradation in lithium-ion batteries during subsequent cycling. However, the underlying mechanisms remain poorly understood. In this study, we investigate commercial 21700 cells using integrated experiments and coupled electrochemical–mechanical modeling to elucidate how mechanically induced defects evolve into catastrophic winding collapse during charge–discharge cycling. Controlled compressive deformations (1-4 mm) introduce non-fatal jellyroll flattening, which acts as a latent stress concentrator. During cycling, intercalation-induced volume changes amplify these defects via progressive stress accumulation, driving a coupled electrochemo-mechanical degradation pathway that hastens structural collapse. Consequently, cells subjected to 4 mm deformation exhibit rapid impedance growth (a 2.39-fold increase) and accelerated capacity decay, dropping to a 90% state of health within 100 cycles. Guided by simulation, we demonstrate that an electrode-thickening strategy (Δ t = 0.24-0.28 mm) suppresses collapse by enhancing jellyroll stiffness and mitigating stress concentration, though this effect has a clear saturation limit. Ultimately, these findings identify cycling-driven electrochemo-mechanical amplification as the primary mechanism governing winding collapse in deformed cells, providing quantitative design guidelines for safer, mechanically robust battery architectures.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Safety issues and mechanisms of lithium-ion battery cell upon mechanical abusive loading: a review10.1016/j.ensm.2019.06.036 ↗
2. Additive manufacturing as a method to design and optimize bioinspired structures10.1002/adma.201800940 ↗
3. A review of multiscale mechanical failures in lithium-ion batteries: implications for performance, lifetime and safety10.1007/s41918-024-00233-w ↗
4. Mechanical integrity of 18650 lithium-ion battery module: packing density and packing mode10.1016/j.engfailanal.2018.04.041 ↗
5. Development of a computational fluid dynamics simulation framework for aerothermal analyses of electric vehicle battery packs[J/OL]
6. Impact of localized compression on lithium plating and capacity degradation in lithium-ion pouch cells10.1016/j.jpowsour.2025.237657 ↗
7. In-situ characterizations and mechanism analysis of mechanical inhomogeneity in a prismatic battery module10.1016/j.jpowsour.2022.232053 ↗
8. Electrochemical degradation of defective lithium-ion batteries under mechanical vibration10.1016/j.energy.2025.139377 ↗
9. Effect of mechanical vibration on phase change material based thermal management system for a cylindrical lithium-ion battery at high ambient temperature and high discharge rate10.1016/j.ijheatmasstransfer.2023.124255 ↗
10. Impact of vibration on Li-ion battery cooling: a system dynamics analysis and physical characterisation10.1016/j.ijthermalsci.2024.109622 ↗
11. Cell geometry influences on the vibration performance of lithium-ion batteries10.1016/j.est.2024.115227 ↗
12. Quantifying and modeling of stress-driven short-circuits in lithium-ion batteries in electrified vehicles10.1039/D0TA12082K ↗
13. Experimental study on the dynamic behavior of prismatic lithium-ion battery upon repeated impact10.1016/j.engfailanal.2020.104667 ↗
14. Mechanics-driven anode material failure in battery safety and capacity deterioration issues: a review10.1115/1.4054566 ↗
15. Aging mechanisms and thermal characteristics of commercial 18650 lithium-ion battery induced by minor mechanical deformation
16. Electrochemical-mechanical understanding of the accelerated degradation of lithium-ion batteries caused by mechanical stress10.1016/j.energy.2025.137420 ↗
17. Mechanistic understanding of reproducibility in nail penetration tests
18. Dynamic mechanical integrity of cylindrical lithium-ion battery cell upon crushing10.1016/j.engfailanal.2015.03.025 ↗
19. Integrated computation model of lithium-ion battery subject to nail penetration10.1016/j.apenergy.2016.08.101 ↗
20. Multi-field interpretation of internal short circuit and thermal runaway behavior for lithium-ion batteries under mechanical abuse10.1016/j.energy.2022.126027 ↗
21. Revealing the internal short circuit mechanisms in lithium-ion batteries upon dynamic loading based on multiphysics simulation10.1016/j.apenergy.2023.121790 ↗
22. Experimental analysis and safety assessment of thermal runaway behavior in lithium iron phosphate batteries under mechanical abuse10.1038/s41598-024-58891-1 ↗
23. Impact of silicon content on mechanical abuse and thermal runaway of Li-ion battery cells10.1016/j.jpowsour.2024.235840 ↗
24. Comparative analysis of cylindrical lithium-ion battery responses to continuous and intermittent compression: insights into safety and failure mechanisms10.1016/j.energy.2025.136576 ↗
25. Experimental study on the degradation characteristics and mechanism of lithium-ion batteries under mild mechanical deformation10.1016/j.est.2024.115097 ↗
26. A multiphysics understanding of internal short circuit mechanisms in lithium-ion batteries upon mechanical stress abuse10.1016/j.ensm.2021.12.018 ↗
27. Degradation of all-vanadium redox flow batteries (VRFB) investigated by electrochemical impedance and X-ray photoelectron spectroscopy: part 2 electrochemical degradation10.1016/j.jpowsour.2016.06.040 ↗
28. Quantifying electrochemical processes in batteries and beyond10.1002/eem2.12452 ↗
29. Enhancing mechanical reliability and safety performance of a battery pack system for electric vehicles: a review10.1016/j.etran.2025.100469 ↗
30. Improved radial compression for calibrating homogenized model of cylindrical battery jellyrolls10.1016/j.measurement.2025.119471 ↗
31. An experimental and numerical study on charged 21700 lithium-ion battery cells under dynamic and high mechanical loads10.3390/en16010211 ↗
32. Comparative study of Li-ion 21700 cylindrical cell under mechanical deformation
33. Multiaxial failure characterization and short-circuit prediction of large-format prismatic lithium-ion batteries10.1016/j.apenergy.2025.126963 ↗
34. On the damage and performance degradation of multifunctional sandwich structure embedded with lithium-ion batteries under impact loading10.1016/j.jpowsour.2023.233509 ↗
35. Phenomenological force and swelling models for rechargeable lithium-ion battery cells10.1016/j.jpowsour.2016.01.103 ↗
36. Swelling force in lithium-ion power batteries10.1021/acs.iecr.0c01035 ↗
37. An experimental study on the mechanical characteristics of Li-ion battery during overcharge-induced thermal runaway10.1002/er.7072 ↗
38. Experimental investigation on mechanical-electrochemical coupling properties of cylindrical lithium-ion batteries10.1016/j.energy.2024.130536 ↗
39. Comprehensive investigation on the durability and safety performances of lithium-ion batteries under slight mechanical deformation10.1016/j.est.2023.107450 ↗
40. Progressive degradation behavior and mechanism of lithium-ion batteries subjected to minor deformation damage10.1016/j.est.2024.113992 ↗
41. Coupling effect of state of charge and loading rate on internal short circuit of lithium-ion batteries induced by mechanical abuse10.1016/j.apenergy.2024.124138 ↗
42. Investigate the changes of aged lithium iron phosphate batteries from a mechanical perspective10.1016/j.isci.2024.111300 ↗
43. Mechanistic insights into the in-plane swelling of lithium-ion battery from electrode to cell
44. Modeling, validation, and analysis of swelling behaviors of lithium-ion batteries10.1016/j.est.2023.109499 ↗
45. Layer-by-layer delithiation during lattice collapse as the origin of planar gliding and microcracking in Ni-rich cathodes
46. Eliminating lattice collapse in dopant-free LiNi0.9Mn0.1O2 cathodes via electrochemically induced partial cation disorder
47. Operando grazing incidence small-angle X-ray scattering/X-ray diffraction of model ordered mesoporous lithium-ion battery anodes10.1021/acsnano.6b06708 ↗
48. Mechanical studies of the solid electrolyte interphase on anodes in lithium and lithium ion batteries10.1088/1361-6528/ac17fe ↗
49. Effects of minor mechanical deformation on the lifetime and performance of commercial 21700 lithium-ion battery10.1149/1945-7111/ac79d4 ↗
50. Quantitative and non-destructive analysis of failure process of pouch lithium metal batteries10.1002/aenm.202503858 ↗
51. How mechanical constraint alters failure behavior and enables early warning for prismatic, pouch, and cylindrical LiFePO4 batteries
52. Internal configuration of prismatic lithium-ion cells at the onset of mechanically induced short circuit10.1016/j.jpowsour.2015.12.026 ↗
53. Investigation of the mechanical integrity of prismatic Li-Ion batteries under multi-position indentation