journal article·2026-10Open access

Enhanced interfacial adhesion in hydrocarbon membrane MEAs via plasma activation and thin PFSA ionomer coating

Aman Pathania, Hyunwoo Song, Muhammad Farjad Ali, Thanh Thien Phan, Hugeun Kwon, Hyejin Lee, Hansung Kim, Dongwon Shin, Byungchan Bae

Abstract

Enhancing interfacial compatibility between hydrocarbon membranes and perfluorosulfonic acid (PFSA) ionomer–based catalyst layers remains a major challenge in proton exchange membrane fuel cells (PEMFCs). Here, an interfacial engineering strategy combining plasma surface activation with a thin PFSA ionomer interlayer is developed for fabricating hydrocarbon membrane-based electrode assemblies (MEAs). Oxygen plasma treatment increases membrane surface energy and wettability, promoting the formation of a uniform and continuous PFSA ionomer coating and enabling stable membrane–electrode integration via decal transfer. Key fabrication parameters, including PFSA ionomer coating thickness, ionomer-to-carbon (I/C) ratio, and hot-pressing pressure, are systematically investigated. The optimized condition (4 μm ionomer coating, I/C = 1.0, and 70 bar hot-pressing) yields the highest single-cell performance. The relatively high hot-pressing pressure, which is difficult to apply to conventional unreinforced PFSA membranes, is enabled by the mechanical robustness of the hydrocarbon membrane combined with the engineered interfacial architecture. Under U.S. Department of Energy (DOE) wet–dry accelerated stress testing, the optimized MEA maintains stable electrochemical performance over 15,000 cycles without interfacial failure. This is the first report of a standalone hydrocarbon membrane MEA sustaining 15,000 wet–dry cycles without interfacial delamination, demonstrating that rational interfacial engineering can enable highly durable next-generation PEMFCs.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fuel Cells and Related Materials · Advanced battery technologies research · Advancements in Solid Oxide Fuel Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Recent developments in proton exchange membranes for fuel cells10.1039/b808149m ↗
2. Novel catalyst support materials for PEM fuel cells: current status and future prospects10.1039/B808370C ↗
3. Recent progress on nafion‐based nanocomposite membranes for fuel cell applications10.1002/mame.200900143 ↗
4. Sulfonated poly (arylene ether sulfone)/sulfonated zeolite composite membrane for high temperature proton exchange membrane fuel cells10.1016/j.ssi.2012.12.006 ↗
5. State of understanding of nafion10.1021/cr0207123 ↗
6. Synthesis and properties of bonding layer containing flexible and fluorinated moieties for hydrocarbon-based membrane electrode assemblies10.1016/j.ijhydene.2016.04.174 ↗
7. Hydrocarbon proton conducting polymers for fuel cell catalyst layers10.1039/c0ee00638f ↗
8. Novel interfacial bonding layers with controlled gradient composition profile for hydrocarbon-based membrane electrode assemblies10.1016/j.jpowsour.2018.07.045 ↗
9. Proton exchange membrane for DMFC and H2/air fuel cells: synthesis and characterization of partially fluorinated disulfonated poly (arylene ether benzonitrile) copolymers10.1016/j.memsci.2007.04.004 ↗
10. Investigation of the impact of interfacial delamination on polymer electrolyte fuel cell performance10.1149/1.3006398 ↗
11. Hydrocarbon-based electrode ionomer for proton exchange membrane fuel cells10.1016/j.ijhydene.2020.03.003 ↗
12. The effect of sulfonated poly (ether ether ketone) as the electrode ionomer for self-humidifying nanocomposite proton exchange membrane fuel cells10.1016/j.energy.2015.01.086 ↗
13. Binder effect on fuel cell performance and interfacial stability of membrane electrode assembly fabricated with sulfonated poly (ether ether ketone) membrane10.1007/s13233-019-7063-y ↗
14. Thin bonding layer using sulfonated poly (arylene ether sulfone)/PVdF blends for hydrocarbon-based membrane electrode assemblies10.1016/j.electacta.2015.05.031 ↗
15. Directly copolymerized partially fluorinated disulfonated poly (arylene ether sulfone) random copolymers for PEM fuel cell systems: synthesis, fabrication and characterization of membranes and membrane–electrode assemblies for fuel cell applications10.1016/j.memsci.2007.01.036 ↗
16. Adhesive-free adhesion between heat-assisted plasma-treated fluoropolymers (PTFE, PFA) and plasma-jet-treated polydimethylsiloxane (PDMS) and its application10.1038/s41598-018-36469-y ↗
17. Oxygen plasma-mediated microstructured hydrocarbon membrane for improving interface adhesion and mass transport in polymer electrolyte fuel cells10.1021/acsami.2c15122 ↗
18. Plasma technology applications in proton exchange membrane fuel cell systems10.1002/cctc.202301372 ↗
19. Proton conducting sulfonated polysulfone and polyphenylsulfone multiblock copolymers with improved performances for fuel cell applications10.1016/j.jiec.2023.02.037 ↗
20. Preparation and characterization of sulfonated polyethersulfone for cation-exchange membranes10.1016/j.memsci.2010.11.006 ↗
21. Induced super hydrophilicity due to surface modification of polypropylene membrane treated by O2 plasma10.1016/j.apsusc.2010.08.117 ↗
22. Improving the mechanical durability of short-side-chain perfluorinated polymer electrolyte membranes by annealing and physical reinforcement10.1021/acsomega.9b02436 ↗
23. Evaluating the durability of perfluorosulfonic acid membranes in fuel cells using combined open-circuit voltage-accelerated stability testing10.3390/polym16101348 ↗
24. Effects of hot pressing conditions on the performance of Nafion membranes coated by ink-jet printing of Pt/MWCNTs electrocatalyst for PEMFCs10.1016/j.ijhydene.2012.04.139 ↗
25. Fabrication method for laboratory-scale high-performance membrane electrode assemblies for fuel cells10.1021/acs.analchem.6b03005 ↗
26. Controlled surface wettability by plasma polymer surface modification10.3390/surfaces2020026 ↗
27. Long-term performance of DMFC based on the blend membrane of sulfonated poly (ether ether ketone) and poly (vinylidene fluoride)10.1016/j.ijhydene.2009.02.065 ↗
28. Fully hydrocarbon membrane electrode assemblies for proton exchange membrane fuel cells and electrolyzers: an engineering perspective10.1002/aenm.202103559 ↗
29. Quantitative analysis effect of the cathode catalyst layer with various ionomer ratio on PEMFC by protonic resistance10.1149/08907.0023ecst ↗
30. Analysis of H2/air polarization losses of low-platinum-loading cathodes with various I/C ratios and carbon supports10.1149/2.0411815jes ↗
31. Benchmarking performance and degradation of Pt supported on different carbons for PEMFC applications using gas diffusion electrode half-cell10.1021/acsaem.5c00184 ↗
32. Effects of ionomer content on Pt catalyst/ordered mesoporous carbon support in polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2012.09.012 ↗
33. Optimization of the ionomer-to-carbon ratio in the cathode catalyst layer of PtCoMn/C alloy catalysts10.1016/j.ijoes.2023.100152 ↗
34. Proton conduction and oxygen reduction kinetics in PEM fuel cell cathodes: effects of ionomer-to-carbon ratio and relative humidity
35. Understanding the morphology and mass transport resistance of mesoporous carbon-supported PEMFC based on modeling analysis10.61558/2993-074X.3546 ↗
36. A modified decal method for preparing the membrane electrode assembly of proton exchange membrane fuel cells10.1016/j.fuel.2014.09.022 ↗
37. Electrochemical impedance spectroscopy to evaluate the effect of pressure exerted in the hot-pressing stage on the performance of PEMFC10.1016/S1452-3981(23)15776-2 ↗
38. Pore structure and cell performance analysis of PEMFC catalyst layers fabricated by decal transfer method with variation of hot pressing pressure10.1149/1.3635625 ↗
39. The impact of hot-press conditions on the durability of polymer electrolyte membrane fuel cells10.1016/j.ijhydene.2024.12.098 ↗
40. A multi-scale analysis method for catalyst layers in PEMFC catalyst coated membranes
41. Influence of hot-pressing temperature on the performance of PEMFC and catalytic activity10.1007/s10800-008-9758-1 ↗
42. Wet/dry cycle durability of polyphenylene ionomer membranes in PEFC10.1016/j.powera.2021.100063 ↗
43. Reinforced polyphenylene ionomer membranes exhibiting high fuel cell performance and mechanical durability10.1021/acsmaterialsau.1c00002 ↗
44. Well-designed polyphenylene PEMs with high proton conductivity and chemical and mechanical durability for fuel cells10.1039/D1TA10480B ↗
45. Accelerated testing of polymer electrolyte membranes under open-circuit voltage conditions for durable proton exchange membrane fuel cells10.1016/j.ijhydene.2017.10.160 ↗