journal article·2026-10Open access

Hole mobility–driven enhancement of hydrogen evolution in EDTA-assisted dye-sensitized TiO2 photoelectrochemical systems

Yuni K. Krisnandi, I Gede Wibawa Putra, Dewangga Oky Bagus Apriandanu, Jacob Yan Mulyana

Abstract

This study investigates the role of charge regeneration and hole mobility in governing hydrogen evolution performance of dye-sensitized TiO 2 photoelectrochemical systems. Mesoporous TiO 2 films (∼7 μm) were sensitized with D102, D131, and Rumbipy dyes and evaluated under simulated solar irradiation (100 mW cm −2 ). In the absence of a sacrificial agent, hydrogen evolution was limited, following the activity trend D131 (0.353 μmol) > D102 (0.301 μmol) > Rumbipy (0.036 μmol), with low Faradaic efficiencies (0.183–2.357%), indicating dominant charge recombination caused by inefficient hole extraction. The addition of EDTA significantly enhanced photocatalytic activity by accelerating dye regeneration and suppressing interfacial recombination. Hydrogen production increased to 226.40 μmol for Rumbipy, 47.22 μmol for D102, and 17.60 μmol for D131, achieving Faradaic efficiencies of 98.88%, 87.47%, and 65.01%, respectively. Correspondingly, stable photocurrents of ∼1.10, ∼0.35, and ∼0.26 mA cm −2 were obtained. Cyclic voltammetry demonstrated improved electrochemical reversibility (ΔEp = 0.15–0.25 V) compared with bare TiO 2 (∼0.45 V). Despite its lowest dye loading (4.68 × 10 19 cm −3 ), Rumbipy exhibited the highest activity, confirming that efficient hole mobility and rapid charge regeneration dominate hydrogen evolution performance.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Iron oxide chemistry and applications · Advanced Photocatalysis Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. A comprehensive overview of reactor design and operating conditions for photoelectrochemical water splitting10.1016/j.ijhydene.2026.154253 ↗
2. Scaling photoelectrochemical water splitting for a commercial future of clean hydrogen: a review of photoelectrode advances10.1016/j.fuel.2025.137987 ↗
3. Photoelectrochemical pathways to green hydrogen. analysis, overview, and foresight10.1016/j.rser.2026.116753 ↗
4. Recent advances in rational design of defect-engineered photocatalysts toward sustainable NH3 synthesis as H2 carrier: from fundamental and development to machine-learning10.1016/j.ijhydene.2025.152395 ↗
5. Engineering semiconductor/electrocatalyst interface for efficient photoelectrochemical water splitting10.1016/j.cclet.2025.112026 ↗
6. The functional role of different carbon/semiconducting oxide hybrid nanostructures for photoelectrochemical (PEC) water splitting
7. Divulging the potential role of wide band gap semiconductors in electro and photo catalytic water splitting for green hydrogen production10.1016/S1872-2067(24)60156-7 ↗
8. Dual built-in electrical field constructed in ternary BiVO4/Co2AlO4/CuCo-LDH photoanode for boosted PEC water splitting10.1016/j.electacta.2026.148238 ↗
9. Quantitative study of oxidation mechanism in photoelectrochemical mechanical polishing of difficult-to-process semiconductor wafers10.1016/j.ijmachtools.2025.104307 ↗
10. Recent advances in graphitic carbon nitride based photocatalytic hydrogen peroxide production: from materials to devices10.1016/j.cej.2026.174144 ↗
11. A comparison of photocatalytic reforming reactions of methanol and triethanolamine with Pd supported on titania and graphitic carbon nitride10.1016/j.apcatb.2017.01.042 ↗
12. Non-TiO2-based photoanodes for photoelectrocatalytic wastewater treatment: electrode synthesis, evaluation, and characterization††electronic supplementary information (ESI) available. See10.1039/D5EY00068H ↗
13. Role of doped titanium species in the enhanced photoelectrochemical properties of iron oxide films: comparison between water oxidation and iodide ion oxidation10.1016/j.jelechem.2016.02.001 ↗
14. Ferromagnetic hybrid 2D FeS/FeS2 nanostructures as electrocatalysts for the hydrogen evolution reaction10.1021/acsanm.4c05598 ↗
15. High performance photodetectors based on In2S3, In2S1.5Se1.5 and In2Se3 nanostructures10.1039/D3MA00808H ↗
16. Dielectric behavior and phase transition of La2Mo2O9 films synthesized by spray pyrolysis technique10.1007/s10854-022-09796-0 ↗
17. Recent advances and perspective of modified TiO2-based photoanodes toward photoelectrochemical water splitting10.1016/j.fuel.2024.132366 ↗
18. Photoelectrochemical enhancement for TiO2-based photoanodes: In-situ electrochemical analysis, modification strategies and mechanism studies10.1016/j.electacta.2024.144859 ↗
19. Structural functionalized TiO2-mediated photocatalysts as dye degradation agents: a systematic review10.1016/j.materresbull.2025.113852 ↗
20. Fabrication of dye-sensitized solar cells using titanate nanotube–ultrasonicated TiO2 bilayer photoelectrodes for enhanced specific surface area and electron transport efficiency10.1016/j.matchemphys.2026.132396 ↗
21. Investigation of charge transport mechanism at TiO2/MAPbI3/β-Carotene heterostructure in natural dye sensitized solar cells10.1016/j.mseb.2024.117197 ↗
22. Next-generation sensitizers for dye sensitizer solar cells: molecular engineering, performance metrics, and photostability
23. Research progress on dyes for n-type dye-sensitized solar cells10.1016/j.mseb.2025.118052 ↗
24. Photocatalytic hydrogen production: materials design, system engineering, and data-driven advances10.1016/j.cej.2026.175401 ↗
25. Bi/ZnIn2S4 Schottky heterojunction for sacrificial-agent-free photocatalytic hydrogen generation coupled with furfuryl alcohol oxidation10.1016/j.mssp.2026.110639 ↗
26. Ag2O/SnO2 heterojunction nanocomposites for visible-light driven photocatalytic dye remediation and green hydrogen production10.1016/j.micrna.2025.208546 ↗
27. Influence of electron donors on the charge transfer dynamics of carbon nanodots in photocatalytic systems10.1021/acscatal.4c02327 ↗
28. Effects of ethylenediaminetetraacetic acid (EDTA) used as a hole scavenger on UV-assisted photoreduction of graphene oxide on the surface of TiO2: an investigation of irradiation time and scavenger concentration10.1016/j.ceramint.2025.12.245 ↗
29. Dye-sensitized solar cells (DSSC): Principles, materials and working mechanism10.1016/j.cocis.2024.101871 ↗
30. Efficient dye-sensitized solar cells using TiO2/g-C3N5 composite photoanodes under indoor ambient light10.1016/j.ceramint.2025.10.182 ↗
31. Synthesis and evaluation of a self-standing CuBi2O4/CuO/Fe2O3 electrode for arsenic removal via photoelectrocatalysis10.1016/j.jece.2024.113397 ↗
32. Effect of TiO2 concentration in graphene Oxide/TiO2 nanocomposites as photoanode on the performance of dye-sensitized solar cells10.1016/j.matchemphys.2026.132371 ↗
33. Cobalt-doped rutile/anatase TiO2 photoanode with oriented energy band offset for photoelectrochemical water splitting10.1016/j.apsusc.2025.163159 ↗
34. Recent advances in solar photovoltaic systems for emerging trends and advanced applications10.1016/j.rser.2015.09.043 ↗
35. Dye sensitization of TiO2 relevant to photocatalytic hydrogen generation: current research trends and prospects10.1016/j.jphotochemrev.2023.100621 ↗
36. Effective dyes for DSSCs–Important experimental and calculated parameters10.1016/j.nexus.2024.100282 ↗
37. One-pot synthesis, photophysical, electrochemical and molecular property of mixed-ligands ruthenium complex functionalities: potential materials for dye-sensitized solar cells (DSSCs)10.1016/j.dyepig.2024.112626 ↗
38. Interdye hole transport accelerates recombination in dye sensitized mesoporous films10.1021/jacs.6b04956 ↗
39. Impacts of paste preparation methods on the porous TiO2 nanostructure properties and naturally dye-sensitized solar cells performance10.1016/j.jmrt.2022.04.134 ↗
40. Effect of different titanium dioxide (TiO2) deposition layers for dye-sensitized solar cell (DSSC) application10.1016/j.electacta.2025.146267 ↗
41. Bias-Free highly efficient and stable dye-sensitized photoelectrochemical cells via Cascade charge transfer10.1002/adfm.202422757 ↗
42. Artificial-leaf hydrogen production: advancing indoor renewable energy via phosphate-coated CdS/TiO2 heterojunctions
43. Photoelectrochemical behavior of sensitized TiO2 photoanodes in an aqueous environment: application to hydrogen production10.1021/ic9023037 ↗
44. Design of dye-sensitized TiO2 materials for photocatalytic hydrogen production: light and shadow