journal article·2026-10

Multiple hydrogen-bond cross-linking of alginate-tannic acid binder for silicon anodes in lithium-ion batteries

Caiyun Chen, Shuo Fan, Aiyun Hu, Yuting Chen, Wenzheng Zhu, Jiaxiang Wang, Hongxun Yang, Yingying Chen

Publisher page

Abstract

Silicon (Si) is a highly promising anode material for next-generation lithium-ion batteries (LIBs) owing to its ultrahigh theoretical capacity, but its practical application is severely hindered by extreme volume expansion during lithiation/delithiation, which causes electrode pulverization and rapid capacity decay. Herein, a water-based composite binder (ST) is fabricated via physical cross-linking of sodium alginate (SA) and tannic acid (TA) through multiple reversible hydrogen bonds, constructing a three-dimensional network. The dynamic hydrogen-bonded network endows ST with superior self-healing ability, enhanced thermal stability, and reduced electrolyte swelling ratio compared with single SA or TA. The Si@ST anode shows lower interfacial impedance and a higher Li⁺ diffusion coefficient, as the stable three-dimensional network maintains electrode structural integrity and promotes the formation of a LiF-rich solid electrolyte interphase (SEI). The Si@ST anode delivers exceptional performance of a specific capacity of 2459.4 mAh g⁻¹ with 79% capacity retention after 100 cycles at 840 mA g⁻¹, and a high rate capability of 2069 mAh g⁻¹ at 2100 mA g⁻¹. This work develops a low-cost, green, and scalable binder design strategy using renewable biomass materials, which effectively mitigates Si volume expansion and advances the sustainable development of high-performance Si-based anodes for LIBs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Advances and future prospects of micro-silicon anodes for high-energy-density lithium-ion batteries: a comprehensive review10.1002/adfm.202403032 ↗
2. Natural clay-derived siOx@graphene aerogel integrated throughan oxygen bridge for advanced lithium storage10.1021/acs.energyfuels.5c03731 ↗
3. A low-cost and high-capacity SiOx/C@graphite hybrid as an advanced anode for high-power lithium-ion batteries10.1021/acsomega.0c00686 ↗
4. Stabilizing porous micro-sized silicon anodes via construction of tough composite interface networks for high-energy-density lithium-ion batteries10.1007/s12274-024-6937-2 ↗
5. Facile redox synthesis and surface engineering of porous silicon from zintl compound for high-performance lithium ion battery anodes10.1021/acsami.4c10691 ↗
6. Construction of rice husk-derived SiOx nanoparticles encapsulated with graphene aerogel hybrid for high-performance lithium ion batteries10.1016/j.electacta.2022.140572 ↗
7. Ladderlike polysilsesquioxanes derived dual-carbon-buffer-shell structural silicon as stable anode materials for lithium-ion batteries10.1016/j.jpowsour.2024.234331 ↗
8. Integrated prelithiation and SEI engineering for high-performance silicon anodes in lithium-ion batteries10.1093/nsr/nwaf084 ↗
9. Interfacial engineering of porous siOx@C composite anodes toward high-performance lithium-ion batteries10.1016/j.cej.2023.145960 ↗
10. Batch-scale synthesis and interfacially enhanced stability of silicon suboxide-based anodes toward high-performance lithium-ion batteries10.1021/acsami.4c10315 ↗
11. Key factors for binders to enhance the electrochemical performance of silicon anodes through molecular design10.1002/smll.202101680 ↗
12. Rational design of a trifunctional binder for hard carbon anodes showing high initial coulombic efficiency and superior rate capability for sodium-ion batteries10.1002/adfm.202104137 ↗
13. Probing the Reaction between PVDF and LiPAA vs Li7Si3: investigation of Binder Stability for Si Anodes10.1149/2.0241912jes ↗
14. Biomass-derived polymeric binders in silicon anodes for battery energy storage applications10.1039/D1GC01814K ↗
15. Toward efficient binders for Li-Ion battery Si-Based anodes: polyacrylic acid10.1021/am100871y ↗
16. Effect of high adhesive polyvinyl alcohol binder on the anodes of lithium ion batteries10.1016/j.elecom.2011.06.034 ↗
17. Mixed ion-electron conductive binders coupling superior stiffness and toughness establish dual crosslinking stable silicon anodes10.1016/j.cej.2025.159373 ↗
18. Cross-linking chemistry enables robust conductive polymeric network for high-performance silicon microparticle anodes in lithium-ion batteries10.1016/j.jpowsour.2022.232495 ↗
19. Stable silicon anode for lithium-ion batteries through covalent bond formation with a binder via esterification10.1021/acsami.9b03866 ↗
20. Physicochemical dual cross-linking conductive polymeric networks combining high strength and high toughness enable stable operation of silicon microparticle anodes10.1002/adma.202301320 ↗
21. Dynamic hydrogen bond cross-linking binder with self-healing chemistry enables high-performance silicon anode in lithium-ion batteries10.1016/j.jcis.2023.12.057 ↗
22. Improving the electrochemical property of silicon anodes through hydrogen bond cross-linked thiourea-based polymeric binders10.1021/acsami.0c18743 ↗
23. A major constituent of brown algae for use in high-capacity Li-Ion batteries10.1126/science.1209150 ↗
24. A coordinatively cross-linked polymeric network as a functional binder for high-performance silicon submicro-particle anodes in lithium-ion batteries10.1039/C4TA04320K ↗
25. Multiple hydrogel alginate binders for Si anodes of lithium-ion battery10.1016/j.electacta.2017.05.094 ↗
26. Construction of dual crosslinked network binder via sequential ionic crosslinking for high-performance silicon anodes10.1007/s12598-023-02261-9 ↗
27. A biomimetic green binder: forming a biomorphic polymer network in SiOx anode to buffer expansion and enhance performance10.1016/j.cej.2023.146284 ↗
28. Engineering of aqueous binder mediated organic/inorganic artificial interfacial layers for enhancing silicon anode performance10.1016/j.jpowsour.2024.235651 ↗
29. Tannic acid as a small-molecule binder for silicon anodes10.1021/acsaem.0c01051 ↗
30. Tannic acid as a binder and electronic conductor precursor in silicon electrodes for Li-ion batteries10.1016/j.elecom.2023.107495 ↗
31. Graphite Co-Intercalation chemistry in sodium-ion batteries10.1002/batt.202400521 ↗
32. A mechanically robust self-healing binder for silicon anode in lithium ion batteries10.1016/j.nanoen.2020.105654 ↗
33. Highly elastic binders integrating polyrotaxanes for silicon microparticle anodes in lithium ion batteries10.1126/science.aal4373 ↗
34. High-performance lithium ion batteries combining submicron silicon and thiophene-terephthalic acid-conjugated polymer binders10.1021/acssuschemeng.9b05800 ↗
35. Flexible polyimides through one-pot synthesis as water-soluble binders for silicon anodes in lithium ion batteries10.1016/j.jpowsour.2017.12.086 ↗
36. Magnetic field-driven ion selectivity boosts LiF-Rich SEI formation for enhanced lithium metal battery performance across temperatures10.1021/acsami.4c21968 ↗
37. Natural polyphenol tannic acid as an efficient electrolyte additive for high performance lithium metal anode
38. Ionic electronic conductivity regulation of n-type polyoxadiazole lithium sulfonate conductive polymer binders for high-performance silicon microparticle anodes10.1016/j.cclet.2020.10.010 ↗
39. In situ prepared three-dimensional covalent and hydrogen bond synergistic binder to boost the performance of SiOx anodes for lithium-ion batteries10.1021/acsami.2c21689 ↗
40. An innovative polydopamine/polyvinyl alcohol binder system for high-performance micro-sized silicon anodes10.1002/ente.202401591 ↗
41. Hierarchically structured conductive polymer binders with silver nanowires for high-performance silicon anodes in lithium-ion batteries10.1021/acsami.2c00844 ↗
42. Stress-dissipative slidable binders via 3D covalent assembly of hyperbranched polyethyleneimine and polyrotaxanes for stable high-capacity silicon anodes10.1016/j.jpowsour.2025.238196 ↗
43. Highly stable silicon anode enabled by a water-soluble tannic acid functionalized dual-network binder
44. Inorganic crosslinked supramolecular binder with fast self-healing for high performance silicon based anodes in lithium-ion batteries10.1016/j.jcis.2022.06.002 ↗
45. Advanced inorganic lithium metasilicate binder for high-performance silicon anode10.1016/j.jcis.2023.08.071 ↗
46. In situ preparation of an advanced binder with a triple-crosslinking network for high-performance silicon anodes10.1016/j.jallcom.2024.173869 ↗
47. Unlocking stable cycling in silicon kerf waste anodes with recycled polyacrylamide-based binders for lithium-ion battery applications10.1021/acsami.5c19882 ↗
48. Designing multifunctional, 3D cross-linked network binder for actual use in high performance lithium ion batteries silicon based anodes10.1016/j.jpowsour.2024.235490 ↗
49. A branched hydrogen-bonded cross-linking fluorine-free waterborne binder for highly stable lithium-ion battery10.1016/j.jcis.2025.138707 ↗
50. Bifunctional trimethylsilyl-modified fluorinated ester additive for LiF-rich solid electrolyte interphase in lithium metal batteries
51. Bifunctional sodium lignosulfonate enabled the anode with LiF-rich interface for wide-temperature lithium-ion batteries10.1016/j.jpowsour.2025.237354 ↗