journal article·2026-10Open access

Impact of water content on reversible Solid Oxide Cells: Semi-empirical modelling and effective electrolyte conductivity estimation

Francesca Mennilli, Mosè Rossi, Andrea Monforti Ferrario, Massimiliano Della Pietra, Gabriele Comodi

Abstract

Solid Oxide Cell (SOC) performance strongly depends on temperature, pressure, gas composition, and flow rate. While extensive research has focused on SOC optimisation, the impact of water content on predictive reliability remains underexplored. This study investigates how fuel-side water concentration affects reversible SOC (rSOC) performance. Effective conductivity parameters were estimated from Electrochemical Impedance Spectroscopy (EIS) and polarisation curves under different fuel compositions, showing dependence on steam content due to transport and interfacial effects. These parameters were used to calibrate a semi-empirical rSOC model. For EIS-based conductivity estimation, increasing steam content reduced predictive reliability, defined as agreement between simulated and experimental curves. In SOEC mode, Root Mean Square Error (RMSE) increased from 0.0075 V at 50% steam to 0.072 V at 90% steam, while in SOFC mode from 0.038 V at 10% steam to 0.063 V at 50% steam. These results highlight the need to account for water-content effects in rSOC modelling.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · Chemical Looping and Thermochemical Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Recent review and evaluation of green hydrogen production via water electrolysis for a sustainable and clean energy society10.1016/j.ijhydene.2023.09.068 ↗
2. Hydrogen energy storage integrated grid: A bibliometric analysis for sustainable energy production10.1016/j.ijhydene.2024.03.235 ↗
3. Assessment of a NaOH-based alkaline electrolyser’s performance: System modelling and operating parameters optimisation10.1016/j.ijhydene.2024.08.175 ↗
4. Recent advances in high-temperature steam electrolysis with solid oxide electrolysers for green hydrogen production10.3390/en16083327 ↗
5. Celle a combustibile a carbonati fusi per la cattura di CO2 da gas combusti: prospettive e limiti di applicazione in settori industriali soggetti alla direttiva EU-ETS
6. Analisi comparativa di sistemi enrgetici integrati con celle a combustibile
7. The effect of water content on the electrochemical impedance response and microstructure of Ni-CGO anodes for solid oxide fuel cells10.1016/j.jpowsour.2008.12.150 ↗
8. Distinct modeling parameter identification for precision modeling of solid oxide cells under fuel cell and electrolysis modes
9. A parameter study of solid oxide electrolysis cell degradation: Microstructural changes of the fuel electrode10.1016/j.electacta.2018.04.170 ↗
10. Simulation of a reversible SOFC with Aspen Plus10.1016/j.ijhydene.2017.01.189 ↗
11. Wettability analysis of Ni/YSZ interface under operating conditions of solid oxide cells
12. Effect of Gd-doped ceria infiltration into Ni-YSZ on reversible solid oxide cell operation
13. A multiscale model validated on local current measurements for understanding the solid oxide cells performances
14. La0.8Sr0.2Co0.8Ni0.2O3-δ impregnated oxygen electrode for H2O/CO2 coelectrolysis in solid oxide electrolysis cells10.1016/j.jpowsour.2018.02.041 ↗
15. Quantification of the degradation of Ni-YSZ anodes upon redox cycling10.1016/j.jpowsour.2017.11.024 ↗
16. 3D printing of reversible solid oxide cell stacks for efficient hydrogen production and power generation
17. Durability and kinetic effects of CO2-rich oxidizing streams on LSCF-based solid oxide fuel cells
18. Reversible solid oxide cells: Early performance and microstructural evolution during electrolysis and switched mode operation
19. Research on a low temperature reversible solid oxide cell10.1016/j.ijhydene.2017.09.181 ↗
20. Inc. · 2023
21. A review of AC impedance modeling and validation in SOFC diagnosis10.1016/j.electacta.2007.05.071 ↗
22. Boigues Muñoz · 2015
23. A comprehensive review on PEM water electrolysis10.1016/j.ijhydene.2013.01.151 ↗
24. A review on PEM electrolyzer modelling: Guidelines for beginners10.1016/j.jclepro.2020.121184 ↗
25. O’Hayre · 2009
26. Sammes · 2006
27. Modeling mass transfer in solid oxide fuel cell anode: I. Comparison between Fickian, Stefan–Maxwell and dusty-gas models10.1016/j.jpowsour.2016.01.099 ↗
28. A modeling study on concentration over potentials of a reversible solid oxide fuel cell10.1016/j.jpowsour.2006.09.024 ↗
29. Multiscale analysis of Ni-YSZ and Ni-CGO anode based SOFC degradation: From local microstructural variation to cell electrochemical performance10.1016/j.electacta.2023.142589 ↗
30. Atomic weights of the elements 2001 (IUPAC technical report)10.1351/pac200375081107 ↗
31. Electrochemical characterization and modelling of anode and electrolyte supported solid oxide fuel cells
32. Reid · 1987
33. Solid oxide electrolysis cell analysis by means of electrochemical impedance spectroscopy: A review10.1016/j.jpowsour.2014.01.110 ↗