Boosting Li+ transport in LiFePO4/C via synergistic Mo-induced Li vacancies and conductive carbon network
Source abstract
Abstract
Lithium iron phosphate (LiFePO4) has emerged as a promising cathode material for lithium-ion batteries due to its notable stability and low cost. However, its synthesis from iron oxide precursors often results in limited electrochemical performance, primarily due to challenges in reduction, low electronic conductivity, and slow lithium-ion diffusion. Herein, a synergistic modification strategy combining carbon regulation and molybdenum (Mo) doping is proposed. Specifically, optimized carbon not only reduces Fe3+ but also constructs a conductive network, while high-valent Mo doping introduces lithium vacancies via charge compensation. These vacancies not only lower the energy barrier for Li+ diffusion but also elevate electronic conductivity, thereby synergistically enhance both ionic and electronic transport properties. As a result, the synthesized cathode material exhibits remarkable rate performance with 74 mA h g-1 at 10 C within the voltage range of 2.0-3.8 V, which represents a 66% improvement over the pristine sample. Electrochemical impedance spectroscopy (EIS) and galvanostatic intermittent titration technique (GITT) analyses confirm that the modified LiFePO4/C cathode demonstrates remarkably improved lithium-ion diffusion kinetics. Overall, this study proposes a practical and scalable modification approach to enable high-performance, cost-effective, oxide-derived LiFePO4 cathodes for next-generation lithium-ion batteries.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Extraction and Separation Processes · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Green pathways to LiFePO4 cathodes: exploring sustainable iron sources and recycling strategies10.1016/j.cej.2025.166798 ↗
2. Advancing energy storage: the future trajectory of lithium-ion battery technologies10.1016/j.est.2025.116511 ↗
3. Multifunctional self-reconstructive cathode/electrolyte interphase layer for cobalt-free Li-rich layered oxide cathode
4. Review on defects and modification methods of LiFePO4 cathode material for lithium-ion batteries10.1021/acs.energyfuels.1c03757 ↗
5. Research progress in improving the rate performance of LiFePO4 cathode materials10.1007/BF03353785 ↗
6. Automotive Li-Ion batteries: current status and future perspectives10.1007/s41918-018-0022-z ↗
7. An overview on the life cycle of Lithium iron phosphate: synthesis, modification, application, and recycling10.1016/j.cej.2024.149923 ↗
8. Solid-State synthesis of nanosized LiFePO4 cathode material by using a diluting agent10.1021/acsaem.5c00541 ↗
9. Preparation of LiFePO4/C cathode material by extracting Fe2O3 from laterite nickel ore by ammonium jarosite method10.1016/j.jallcom.2022.168078 ↗
10. Effect of carbon sources on the microstructure and performance of LiFePO4 microspheres from hydrous FePO410.1016/j.jallcom.2025.179168 ↗
11. Low cost synthesis of LiFePO4/C cathode materials with Fe2O310.1016/j.jpowsour.2013.05.096 ↗
12. Synthesis and electrochemical properties of olivine LiFePO4 prepared by a carbothermal reduction method10.1016/j.jpowsour.2008.02.084 ↗
13. Fabrication and characteristics of nano LiFePO4/C composites with high capacity and high rate using nano Fe2O3 as raw materials10.1016/j.nanoen.2014.03.017 ↗
14. Enhanced stability and high-yield LiFePO4/C derived from low-cost iron precursors for high-energy Li-ion batteries10.1016/j.est.2023.108453 ↗
15. An efficient carbon coating process applied in different synthetic routes of LiFePO4 cathode materials10.20964/2018.08.07 ↗
16. Interfacial evolution and accelerated aging mechanism for LiFePO4/Graphite pouch batteries under multi-step indirect activation10.1007/s40820-025-01971-2 ↗
17. Synthesis of LiFePO4/carbon/graphene for high-performance Li-ion battery10.1016/j.jelechem.2023.117205 ↗
18. State of the art and open questions on cathode preparation based on carbon coated Lithium iron phosphate10.1016/j.compositesb.2015.08.064 ↗
19. Rate-dependent failure behavior regulation of LiFePO4 cathode via functional interface engineering10.1002/adfm.202421284 ↗
20. Electrochemical performance of hybrid supercapacitor device based on Mn-doped LiFePO4/C and imidazolium ionic liquid electrolyte10.1016/j.est.2023.109112 ↗
21. Mg substitution clarifies the reaction mechanism of olivine LiFePO410.1002/aenm.201401204 ↗
22. Nickel catalyzed graphitized carbon coated LiFe1-xNixPO4 composites as cathode material for high-performance lithium-ion batteries10.1016/j.electacta.2020.136565 ↗
23. The high rate charge/discharge properties and diffusion dynamics of carbon-coated LiFePO4 doped by Na-Ti synergistic effect10.1016/j.nanoen.2025.111396 ↗
24. The co-doping effects of Zr and Co on structure and electrochemical properties of LiFePO4 cathode materials10.1016/j.jallcom.2017.12.313 ↗
25. The influence of iron site doping Lithium iron phosphate on the low temperature properties and the diffusion mechanism of lithium ion10.1007/s11581-024-05898-3 ↗
26. Enhanced Li-Ion diffusivity of LiFePO4 by Ru doping: ab initio and machine learning force field results10.1021/acsaem.3c01429 ↗
27. Niobium-doping constructed d-p-d0 orbital hybridization in LiFePO4 cathode to improve the electrochemical kinetics and structural stability of lithium-ions batteries10.1016/j.jallcom.2025.185167 ↗
28. First principles study on electronic properties and occupancy sites of molybdenum doped into LiFePO410.1016/j.ssc.2012.05.018 ↗
29. Microwave synthesis of molybdenum doped LiFePO4/C and its electrochemical studies10.1039/C6DT00331A ↗
30. Electrochemical performance of Mo-doped LiFePO4/C composites prepared by two-step solid-state reaction10.1007/s11581-012-0768-y ↗
31. Investigation of electronic conductivity and occupancy sites of Mo doped into LiFePO4 by ab initio calculation and X-ray absorption spectroscopy10.1021/jp801497z ↗
32. A hydrothermally synthesized LiFePO4/C composite with superior low-temperature performance and cycle life10.1016/j.apsusc.2017.11.276 ↗
33. Low temperature synthesis of nanostructured LiFePO4/C cathode material for lithium ion batteries10.1016/j.materresbull.2020.110807 ↗
34. Suppressing the formation of Fe2P: thermodynamic study on the phase diagram and phase transformation for LiFePO4 synthesis10.1016/j.energy.2017.06.036 ↗
35. Tailoring native defects in LiFePO4: insights from first-principles calculations10.1021/cm200725j ↗
36. Enhanced rate performance of the mortar-like LiFePO4/C composites combined with the evenly coated of carbon aerogel10.1016/j.jallcom.2021.158776 ↗
37. Near-in-situ electrochemical impedance spectroscopy analysis based on Lithium iron phosphate electrode10.1016/j.electacta.2023.142919 ↗
38. Accelerating Li-Ion diffusion in LiFePO4 by polyanion lattice engineering
39. Hydrothermally synthesized nanostructured LiMnxFe1-xPO4 (x = 0-0.3) cathode materials with enhanced properties for lithium-ion batteries10.1038/s41598-021-91881-1 ↗