journal article·2026-09Open access

Termination-engineered high-entropy MXenes as bifunctional catalysts for shuttle suppression in aluminum-sulfur batteries

Saba Khan, Rahul Koka, Tanveer Hussain, Nacir Tit, Chandra V. Singh

Abstract

Rechargeable Al-S batteries are attractive for scalable energy storage because Al and S are abundant and low cost, but their performance is limited by soluble polysulfide shuttling and sluggish conversion kinetics. Here, we use first-principles calculations to investigate termination-engineered high-entropy (HE) MXenes with -O, -OH, and mixed -O/-OH (“M”) terminations as multifunctional cathode additives for simultaneous polysulfide immobilization and catalytic conversion. Ab-initio molecular dynamics confirms the structural stability of all HE-MXene variants at 300 K, while projected density of states shows preserved metallic conductivity for efficient charge transport. Adsorption calculations for Al-polysulfides (Al 2 S 3 , Al 2 S 6 , Al 2 S 12 , Al 2 S 18 , and S 8 ) reveal consistently stronger binding on HE-MXenes than in DOL/DME electrolytes, indicating a thermodynamic driving force for suppressing dissolution-driven shuttle. Among the candidates, the mixed-terminated HE2 MXene exhibits the strongest overall anchoring, supported by charge-density difference analysis showing pronounced interfacial charge redistribution without loss of metallic character. Van der Waals decomposition indicates that adsorption originates from balanced dispersion and polar/chemical interactions. Climbing-image nudged elastic band calculations for Al 2 S 3 dissociation show termination-dependent kinetics: -OH termination gives the lowest barriers (∼0.96 and 0.88 eV), while mixed termination offers the best compromise between strong adsorption and reduced barriers (∼1.12 and 0.91 eV).
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · MXene and MAX Phase Materials · Advancements in Battery Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Suppressing lithium polysulfide shuttle in li-s batteries using the alpc12 composite for enhanced stability and performance10.1021/acsami.5c02942 ↗
2. To wards sustainable energy storage of new low-cost aluminum batteries from fundamental study to industrial applications10.1016/j.jpowsour.2025.236168 ↗
3. Research progress on rechargeable aluminum sulfur batteries based on different electrolyte systems10.1016/j.jpowsour.2024.235837 ↗
4. Aluminium-sulfur batteries: a low-cost alternative to lithium-ion batteries
5. Suppression strategies for the polysulfide shuttle effect in electrolyte systems10.1038/s43246-025-00953-6 ↗
6. Breaking the barrier: strategies for mitigating shuttle effect in lithium–sulfur batteries using advanced separators10.3390/polym15193955 ↗
7. Functionalized Hf3C2 and Zr3C2 MXenes for suppression of shuttle effect to enhance the performance of sodium–sulfur batteries10.1016/j.jpowsour.2023.233298 ↗
8. MXenes with entropy-derived mitigation of shuttle effect in sodium-sulfur batteries10.1016/j.apsusc.2025.163082 ↗
9. Metal-bonded atomic layers of transition metal carbides (MXenes)10.1002/adma.202302141 ↗
10. Challenge and strategies in room temperature sodium-sulfur batteries: a comparison with lithium-sulfur batteries
11. High-entropy oxides for rechargeable batteries10.1002/advs.202401034 ↗
12. A perspective on high-entropy two-dimensional materials10.1002/sus2.47 ↗
13. High entropy 2D carbide MXenes: TiVNbMoC3 and TiVCrMoC310.1021/acsnano.1c02775 ↗
14. Engineering phonon transport through cation disorder in dimensionally constricted high entropy MXene10.1016/j.carbon.2024.119015 ↗
15. Synergistic mechanism of electrocatalytic degradation of typical antibiotics by high-entropy MXenes modified metal organic gels catalysts: theoretical and experimental studies10.1016/j.seppur.2024.128141 ↗
16. Functional two-dimensional high entropy materials
17. First-principles studies on high-entropy Ti0.75V0.75Cr0.75Mo0.75C2 MXene nanosheets as anode materials in zinc-ion batteries10.1021/acsanm.3c03797 ↗
18. Fabrication of novel Ti1.1V1.1Cr0.4Nb1.4C3Tx medium-entropy MXene through the thermodynamic competition strategy10.1016/j.actamat.2024.119713 ↗
19. A novel high-entropy MXene ti1.1v1.2cr0.8nb1.0mo0.9c4tx for high-performance supercapacitor10.1016/j.scriptamat.2023.115596 ↗
20. A new Ti2V0.9Cr0.1C2Tx MXene with ultrahigh gravimetric capacitance10.1016/j.nanoen.2022.107129 ↗
21. High-entropy MXene Ti3(B0.25C0.25N0.25O0.25)2O2 as anode materials for lithium-ion batteries: insight from first principles
22. High-entropy atomic layers of transition-metal carbides (MXenes)10.1002/adma.202101473 ↗
23. High entropy carbonitrides max phases and their derivative MXenes10.1002/aenm.202103228 ↗
24. High-entropy laminate metal carbide (MAX phase) and its two-dimensional derivative MXene10.1021/acs.chemmater.1c03348 ↗
25. Entropy-mediated high entropy MXenes nanotherapeutics: Nir-ii-enhanced intrinsic oxidase mimic activity to combat methicillin-resistant staphylococcus aureus infection
26. First-principles study for discovery of novel synthesizable 2d high-entropy transition metal carbides (MXenes)10.1039/D2TA09996A ↗
27. First-principles calculation on the lithium storage properties of high-entropy MXene Ti3C2(N0.25O0.25F0.25S0.25)210.1039/D3DT02869K ↗
28. High entropy MXene as bifunctional mediator toward advanced Li-S full batteries10.1021/acsnano.3c10731 ↗
29. High entropy alloys: a focused review of mechanical properties and deformation mechanisms10.1016/j.actamat.2019.12.015 ↗
30. Atomic-scale probing of short-range order and its impact on electrochemical properties in cation-disordered oxide cathodes
31. MXenes for non-lithium-ion (Na, K, Ca, Mg, and Al) batteries and supercapacitors10.1002/aenm.202000681 ↗
32. Research progress of functional MXene in inhibiting lithium/zinc metal battery dendrites10.1039/D4RA05220J ↗
33. Theoretical insights into the favorable functionalized Ti2C-based MXenes for lithium–sulfur batteries10.1021/acsomega.0c04043 ↗
34. Anchoring effects of S-terminated Ti2C MXene for lithium-sulfur batteries: a first-principles study10.1016/j.apsusc.2018.05.200 ↗
35. 1V0.7CrxNb1.0Ta0.6C3Tz high-entropy MXene freestanding films for charge storage applications10.1016/j.elecom.2022.107264 ↗
36. High-entropy 2D Carbide MXenes: TiVNbMoC3 and TiVCrMoC310.1021/acsnano.1c02775 ↗
37. Surface terminations of MXene: synthesis, characterization, and properties10.3390/sym14112232 ↗
38. Special quasirandom structures10.1103/PhysRevLett.65.353 ↗
39. Multicomponent multi-sublattice alloys, non-configurational entropy and other additions to the Alloy theoretic automated toolkit10.1016/j.calphad.2008.12.005 ↗
40. First-principles study for discovery of novel synthesizable 2D high-entropy transition metal carbides (MXenes)10.1039/D2TA09996A ↗
41. A general atomic surface modification strategy for improving anchoring and electrocatalysis behaviour of Ti3C2T2 MXene in lithium-sulfur batteries10.1021/acsnano.9b03412 ↗
42. Two-dimensional titanium carbide (Ti3C2Tx) MXenes to inhibit the shuttle effect in sodium sulfur batteries10.1039/D1CP05300K ↗
43. Ab-initio simulations of materials using VASP: density-functional theory and beyond10.1002/jcc.21057 ↗
44. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
45. Assessment of the perdew-burke-ernzerhoff exchange-correlation functional10.1063/1.478401 ↗
46. Special points for Brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
47. A consistent and accurate ab initio parametrization of density functional dispersion correction (DFT-D) for the 94 elements H-Pu10.1063/1.3382344 ↗
48. A fast and robust algorithm for bader decomposition of charge density10.1016/j.commatsci.2005.04.010 ↗
49. A climbing image nudged elastic band method for finding saddle points and minimum energy paths10.1063/1.1329672 ↗
50. A map of single-phase high-entropy alloys10.1038/s41467-023-38423-7 ↗
51. Superior anchoring effect of a Cu-benzenehexathial MOF as an aluminium–sulfur battery cathode host10.1039/D0MA00546K ↗
52. Strategies for realizing rechargeable high volumetric energy density conversion-based aluminum–sulfur batteries
53. Emerging two-dimensional xenes for catalyzing aluminum-sulfur batteries: a DFT study10.1016/j.apsusc.2024.162201 ↗
54. Defect spinel aluminum molybdenum sulfide: a dual-function catalyst for polysulfide conversion and aluminum intercalation in aluminum–sulfur batteries
55. Revealing the catalysis modes for sulfur conversion kinetics in molten salt aluminum-sulfur batteries10.1002/adma.202502662 ↗
56. Progress, pitfalls, and prospects in emerging materials for aluminum-sulfur batteries10.1038/s42004-025-01690-0 ↗
57. Emerging two-dimensional Xenes for catalyzing aluminum-sulfur batteries: a DFT study