journal article·2026-09Open access

Blended conventional and high oxygen permeability ionomers as a fuel cell electrode binder

Eugene Jeong, Jiawei Liu, Shawn Litster

Abstract

Ionomer strongly influences the performance of proton exchange membrane fuel cells (PEMFCs), affecting catalyst activity and reactant transport within the electrodes. While recent work on high oxygen permeability ionomers (HOPI) has demonstrated improved performance compared to conventional perfluorosulfonic acid (PFSA) ionomers such as Nafion™, there have also been reports of increased cracking in fabricated electrodes. We investigated the effects of blending HOPI with Nafion™ ionomer dispersions when fabricating cathode catalyst layers (CCLs). Small-angle x-ray scattering suggests that the ionomers mix well, and adsorption measurements indicate that HOPI adsorbs less strongly to the carbon-supported platinum (Pt) catalyst, and in blends, the Nafion™ ionomer exhibits a greater degree of adsorption. Imaging CCLs revealed a decrease in crack formation in blended samples as HOPI content decreased, with 14% HOPI having the lowest crack density. In a membrane electrode assembly (MEA) using a high surface area carbon support, the 14% HOPI blend exhibited similar performance to 100% HOPI. However, similar performance enhancements were not achieved with a medium surface area carbon support. These findings suggest a path for low-crack CCLs with enhanced oxygen transport, while highlighting a need for further investigation of ionomer blending towards efficient and durable PEMFCs.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advancements in Solid Oxide Fuel Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. PEM Fuel cell and electrolysis cell technologies and hydrogen infrastructure development - a review10.1039/D2EE00790H ↗
2. Technical review of commercial LT-PEMFC technologies: performance, applications and challenges10.1016/j.ijhydene.2025.151480 ↗
3. New roads and challenges for fuel cells in heavy-duty transportation10.1038/s41560-021-00775-z ↗
4. Engineering the catalyst layers towards enhanced local oxygen transport of Low-Pt proton exchange membrane fuel cells: materials, designs, and methods10.1016/j.ijhydene.2022.10.249 ↗
5. Effect of high oxygen permeable ionomers on MEA performance for PEFC10.1149/05002.1495ecst ↗
6. Nonoyama · 2016
7. Effects of both oxygen permeability and ion exchange capacity for cathode ionomers on the performance and durability of polymer electrolyte fuel cells10.1149/2.0071806jes ↗
8. The role of oxygen-permeable ionomer for polymer electrolyte fuel cells10.1038/s41467-021-25301-3 ↗
9. Highly permeable perfluorinated sulfonic acid ionomers for improved electrochemical devices: insights into structure-property relationships10.1021/jacs.9b09170 ↗
10. Highly durable fluorinated high oxygen permeability ionomers for Proton exchange membrane fuel cells10.1002/aenm.202201063 ↗
11. Integration of a high oxygen permeability ionomer into polymer electrolyte membrane fuel cell cathodes for high efficiency and power density10.1016/j.jpowsour.2021.230821 ↗
12. Tailoring ionomer chemistry for improved oxygen transport in the cathode catalyst layer of Proton exchange membrane fuel cells10.1021/acsaem.3c00193 ↗
13. Effects of humidity and produced water on specific adsorption of high oxygen permeability ionomers composed entirely of cyclic monomers on cathode performance for polymer electrolyte fuel cells10.1021/acsaem.4c00177 ↗
14. Mitigating crack Formation when using high oxygen permeability ionomer in PEMFC catalyst layers
15. Effect of engineered cracks in catalyst layers on PEMFC catalyst layer durability10.1149/1945-7111/ad1b7b ↗
16. Tracking the evolution of mechanical degradation in fuel cell membranes using 4D in situ visualization10.1016/j.jpowsour.2018.11.049 ↗
17. Litster
18. Electrode for fuel cell, manufacturing method of electrode for fuel cell
19. Novel interfacial bonding layers with controlled gradient composition profile for hydrocarbon-based membrane electrode assemblies10.1016/j.jpowsour.2018.07.045 ↗
20. Reduction of oxygen transport resistance in PEFC cathode through blending a high oxygen permeable polymer10.1016/j.jpowsour.2022.232500 ↗
21. Impact of catalyst carbon support on the benefits of high oxygen permeability ionomer for proton exchange membrane fuel cells10.1016/j.jpowsour.2024.236032 ↗
22. Dispersion of rod-like particles of nafion in salt-free water/1-propanol and water/ethanol solutions
23. Dispersion of high oxygen permeability ionomers in water-propanol solutions10.1016/j.jcis.2025.139744 ↗
24. Adams
25. PFSA-Ionomer adsorption to C and Pt/C particles in fuel-cell inks10.1021/acsami.5c00211 ↗
26. Ink droplet drying analysis for understanding the ink-catalyst layer transition in proton exchange membrane fuel cells10.1016/j.jpowsour.2023.233644 ↗
27. Fiji: an open-source platform for biological-image analysis10.1038/nmeth.2019 ↗
28. Trainable Weka Segmentation: a machine learning tool for microscopy pixel classification10.1093/bioinformatics/btx180 ↗
29. MorphoLibJ: integrated library and plugins for mathematical morphology with ImageJ10.1093/bioinformatics/btw413 ↗
30. Elucidating the dynamic Nature of fuel cell electrodes as a function of conditioning: an ex situ material characterization and in situ electrochemical diagnostic Study10.1021/acsami.9b11365 ↗
31. Measurement of oxygen transport resistance in PEM fuel cells by limiting Current methods10.1149/1.3152226 ↗
32. Investigation of a catalyst ink dispersion using both ultra-small-angle X-ray scattering and cryogenic TEM10.1021/la1028228 ↗
33. Dictating Pt-Based electrocatalyst performance in polymer electrolyte fuel cells, from formulation to application10.1021/acsami.9b17614 ↗
34. Impact of catalyst ink dispersing methodology on fuel cell performance using in-Situ X-ray scattering10.1021/acsaem.9b01037 ↗
35. Performance analysis of membrane electrode assemblies with various compositions under non-uniform large area operating environments of fuel cells10.1007/s40684-023-00553-0 ↗
36. Morphology evolution and adsorption behavior of ionomers from solution to Pt/C substrates10.1021/acs.macromol.2c00533 ↗
37. Controlling cracking formation in fuel cell catalyst layers10.1016/j.jpowsour.2019.02.058 ↗
38. Formulation of carbon black-ionomer dispersions for thin film formation in fuel cells10.1016/j.partic.2018.08.001 ↗
39. Effects of ionomer chemistry on nanostructure and reactant transport properties in high oxygen permeability ionomers: molecular dynamics simulation study10.1016/j.jpowsour.2025.237810 ↗