journal article·2026-09

Catalytic efficiency of synthesized, thermally treated, and oxidized carbon nanotube catalysts for water splitting supported by density functional theory

Bassam A. Najri, Katia Mohand Saidi, Aykut Caglar, Derya Yıldız, Sefika Kaya, Berdan Ulaş, Nahit Aktaş, Arif Kivrak, Hilal Kivrak

Publisher page

Abstract

The development of efficient, low-cost, and noble-metal-free electrocatalysts is crucial for sustainable hydrogen production via alkaline water splitting. Herein, pristine carbon nanotubes (CNT), high-temperature-treated CNT (CNT-HT), and nitric-acid-oxidized CNT (CNT-OX) were systematically engineered to elucidate the effects of surface chemistry and defect modulation on bifunctional electrocatalytic performance. Structural characterization by XRD, Raman spectroscopy, SEM, TEM, and EDS revealed that thermal treatment improved graphitic ordering and intertube connectivity, whereas oxidation introduced uniformly distributed oxygen-containing functional groups and defect sites while preserving the CNT framework. Electrochemical measurements in 1 M KOH demonstrated that CNT-OX exhibited the best catalytic activity, delivering Tafel slopes of 221.20 mV/dec for OER and 82.53 mV/dec for HER, together with reduced onset potentials and lower charge-transfer resistance. In addition, electrochemical double-layer capacitance (Cdl) analysis showed that CNT-OX possessed the highest Cdl value (0.825 mF/cm2), indicating a larger electrochemically active surface area and a greater number of accessible active sites. Chronoamperometric analysis confirmed its superior durability. DFT calculations further showed that oxidation decreases the HOMO-LUMO energy gap from 5.093 to 5.061 eV. This combined experimental and theoretical study identifies surface oxidation as an effective route to activate CNTs for high-performance, metal-free alkaline water splitting.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrocatalysts for Energy Conversion · Subcritical and Supercritical Water Processes · Ammonia Synthesis and Nitrogen Reduction

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. Clearing the air: how emissions in Asia are hindering economic growth
2. Delving into environmental pollution mitigation: does green finance, economic development, renewable energy resource, life expectancy, and urbanization matter?
3. Does access to energy matter? Understanding the complex nexus among energy consumption, ICT, foreign direct investment and economic growth on carbon emissions in Sub-Saharan Africa10.1016/j.nexus.2024.100346 ↗
4. Impact of energy transitions on energy poverty in the European Union10.1016/j.rser.2024.115311 ↗
5. Adoption of a holistic framework for innovative sustainable renewable energy development: a case study
6. Impact of the energy transition in the electricity sector on the environment and climate change in an industrial State of Andhra Pradesh, India: a life cycle assessment approach and policy directions for developing economies
7. A comprehensive review of carbon dioxide capture, transportation, utilization, and storage: a source of future energy
8. Green hydrogen: pathway to net zero green house gas emission and global climate change mitigation10.3390/hydrogen6020029 ↗
9. Hydrogen penetration in textile industry: a hybrid renewable energy system, evolution programming and feasibility analysis
10. Sustainability assessment of blue hydrogen production through biomass gasification: a comparative analysis of thermal, solar, and wind energy sources10.1016/j.biortech.2024.131798 ↗
11. Low-emission hydrogen supply chain for oil refining: assessment of large-scale production via electrolysis and gasification10.1016/j.ijhydene.2024.11.448 ↗
12. Process optimisation and enviro-economic assessment of carbon-negative hydrogen production from biomass co-gasification
13. Green hydrogen for a sustainable future: a review of production methods, innovations, and applications10.1016/j.ijhydene.2025.02.257 ↗
14. In-situ CO2 utilization for dual production of hydrogen-rich gas and syngas via sorption-enhanced steam methane reforming chemical looping10.1016/j.cej.2025.161127 ↗
15. Fabrication of chitosan supported copper nano catalyst for the hydrogen gas production through methanolysis and hydrolysis of NaBH410.1016/j.ijhydene.2024.12.462 ↗
16. Green hydrogen for a sustainable future: a review of production methods, innovations, and applications10.1016/j.ijhydene.2025.02.257 ↗
17. A review on electrochemical water splitting electrocatalysts for green H2 production: unveiling the fundamentals and recent advances10.1021/acs.langmuir.5c00138 ↗
18. Triboelectric nanogenerator drives electrochemical water splitting for hydrogen production: fundamentals, progress, and challenges10.1002/smll.202407043 ↗
19. Hybrid water electrolysis: is this the way forward to sustainable hydrogen production?10.1039/D5SE00236B ↗
20. The future of alkaline water splitting from the perspective of electrocatalysts-seizing today's opportunities10.1016/j.ccr.2024.216190 ↗
21. Unveiling the potential of metal diborides for electrocatalytic water splitting: a comprehensive review10.1002/eem2.12873 ↗
22. Exploring the potential of biochars for boosting electrocatalytic oxygen evolution reaction10.1016/j.biombioe.2025.107770 ↗
23. Trace Ru-Doped fe@ Ni metal aerogel with core-shell structure as an efficient catalysts for boosting oxygen evolution reaction
24. Designing persimmon-liked FeOOH-(CrCo) Ox on the plasma-treated cobalt foam for a highly efficient oxygen evolution in an alkaline-seawater electrolyte10.1016/j.cej.2024.157098 ↗
25. Defect engineering and carbon supporting to achieve Ni-doped CoP3 with high catalytic activities for overall water splitting10.1007/s40820-024-01471-9 ↗
26. Multiphase nanosheet-nanowire cerium oxide and nickel-cobalt phosphide for highly-efficient electrocatalytic overall water splitting10.1016/j.apcatb.2022.121678 ↗
27. Ir/Mn co‐mixing and oxide‐support interaction modulation through plasma promoted asymmetric oxygen coupling for stable acidic oxygen evolution10.1002/adma.202420159 ↗
28. First-row transition metal oxide oxygen evolution electrocatalysts: regulation strategies and mechanistic understandings10.1039/D0SE01087A ↗
29. Rising again: opportunities and challenges for platinum-free electrocatalysts10.1021/acs.chemmater.5b03331 ↗
30. Hierarchical Cu@CoFe layered double hydroxide core-shell nanoarchitectures as bifunctional electrocatalysts for efficient overall water splitting10.1016/j.nanoen.2017.09.045 ↗
31. Single-wall carbon nanotubes10.1088/2058-7058/13/6/26 ↗
32. Recent advancement of nanostructured carbon for energy applications10.1021/cr5006217 ↗
33. Carbon nanotubes‐based electrocatalysts: structural regulation, support effect, and synchrotron‐based characterization10.1002/adfm.202106684 ↗
34. Enhanced oxygen evolution kinetics via single‐atom catalyst design: a review
35. Novel structured carbon nanotubes fiber based microelectrodes for efficient electrochemical water splitting and glucose sensing10.1016/j.carbon.2023.118709 ↗
36. Multi-walled carbon nanotubes with embedded nickel sulphide as an effective electrocatalyst for Bi-functional water splitting10.1016/j.ijhydene.2024.04.131 ↗
37. Facile green synthesis of Ag/carbon nanotubes composite for efficient water splitting applications10.1016/j.synthmet.2023.117310 ↗
38. Facile synthesis of SmSe2 over multiwalled carbon nanotubes for efficient water-splitting applications10.1007/s43207-023-00328-y ↗
39. Carbon nanotubes as catalysts for wet peroxide oxidation: the effect of surface chemistry10.1016/j.cattod.2019.03.014 ↗
40. Spectral and conformational studies on 3-pyridinealdazine by DFT approach10.1016/j.saa.2014.12.006 ↗
41. Synthesis, characterization and the inhibition activity of a new α-aminophosphonic derivative on the corrosion of XC48 carbon steel in 0.5 M H2SO4: experimental and theoretical studies10.1016/j.jtice.2016.10.026 ↗
42. Comparison of global reactivity descriptors calculated using various density functionals: a QSAR perspective10.1021/ct900347f ↗
43. An electrochemical sensor based on nitrogen doped carbon material prepared from nitrogen-containing precursors
44. Nanocomposite electrode of titanium dioxide nanoribbons and multiwalled carbon nanotubes for energy storage10.3390/ma16020595 ↗
45. M.S., Dresselhaus, A., Jorio, A.G., Souza Filho, R., Saito, Defect characterization in graphene and carbon nanotubes using Raman spectroscopy, Philos. Trans. R. Soc. A Math. Phys. Eng. Sci., 368, 5355, 5377.10.1098/rsta.2010.0213 ↗
46. Enhanced hydrogen production from sodium borohydride methanolysis on amine-functionalized graphene oxide: insights from density functional theory and topological analyses10.1016/j.ijhydene.2025.02.011 ↗
47. Effects of Al interlayer coating and thermal treatment on electron emission characteristics of carbon nanotubes deposited by electrophoretic method10.1186/1556-276X-9-236 ↗
48. Bard · 2022
49. DFT studies of functionalized carbon nanotubes and fullerenes as nanovectors for drug delivery of antitubercular compounds10.1016/j.cplett.2007.08.098 ↗
50. Structural stability of AgCu bimetallic nanoparticles and their application as a catalyst: a DFT study10.1016/j.cattod.2011.09.022 ↗
51. A DFT study on structure, stability, and optical property of fullerenols10.1007/s11224-012-0137-5 ↗
52. Conformational stability of ibuprofen: assessed by DFT calculations and optical vibrational spectroscopy10.1002/jps.21007 ↗
53. Tuning the HOMO–LUMO energy gap of small diamondoids using inverse molecular design10.1021/acs.jctc.6b01074 ↗
54. DFT study of difference caused by catalyst supports in Pt and Pd catalysis of oxygen reduction reaction10.1007/s11426-009-0006-2 ↗
55. Revisiting benzylidenequinolinylnickel catalysts through the electronic effects on catalytic activity by DFT studies10.1002/macp.201500028 ↗
56. Synthesis, characterization, catalytic activity, and DFT calculations of Zn (II) hydrazone complexes10.3390/molecules25184043 ↗
57. Application of supported Mn (III), Fe (III) and Co (II) as heterogeneous, selective and highly reusable nano catalysts for synthesis of arylaminotetrazoles, and DFT studies of the products10.1039/C4RA06463A ↗
58. A DFT study of the acid-catalyzed conversion of 2, 5-dimethylfuran and ethylene to p-xylene10.1016/j.jcat.2012.09.017 ↗
59. Theoretical investigations on molecular structure, NBO, HOMO-LUMO and MEP analysis of two crystal structures of N-(2-benzoyl-phenyl) oxalyl: a DFT study
60. Theoretical investigations on molecular structure, NBO, HOMO-LUMO and MEP analysis of two crystal structures of N-(2-benzoyl-phenyl) oxalyl: a DFT study
61. Enhanced catalytic performance of Pd/PMAc-g-CNT composite for water splitting and supercapacitor applications10.1007/s11581-024-05662-7 ↗
62. Synthesis, characterization, multifunctional electrochemical (OGR/ORR/SCs) and photodegradable activities of ZnWO4 nanobricks10.1007/s10971-018-4698-7 ↗
63. Fe, Cu-decorated carbon material produced from ionic liquids as resourceful electrocatalyst for water splitting10.1016/j.jelechem.2024.118455 ↗
64. Fine-tune the electronic structure in Co-Mo based catalysts to give easily coupled HER and OER catalysts for effective water splitting10.1016/j.apcatb.2023.122474 ↗
65. Ternary nickel–iron sulfide microflowers as a robust electrocatalyst for bifunctional water splitting10.1039/C7TA04438K ↗
66. Processable surface modification of nickel‐heteroatom (N, S) bridge sites for promoted alkaline hydrogen evolution10.1002/anie.201808629 ↗