journal article·2026-09Open access

Mitigating antisite disorder in layered LiNi0.5Mn0.3Co0.2O2 cathodes via lanthanum–boron co-doping

Weixuan Li, Tasmia Tabassum, Ritu Malik, Keerti Rathi, Vijay K. Tomer, Colin van der kuur, Akhil K. Nair, Carlos M. Da Silva, Cristina H. Amon, Ning Yan, Mohini Sain

Abstract

Cation disorder arising from Li + /Ni 2+ antisite defects remains a fundamental limitation to the structural stability and long-term performance of layered nickel-rich cathodes. Here, we report a rational co-doping strategy employing lanthanum and boron to regulate lattice ordering in layered LiNi 0.5 Mn 0.3 Co 0.2 O 2 through a scalable wet-chemical sol–gel synthesis followed by controlled high-temperature sintering. The introduction of La–B dopants promotes enhanced crystallographic ordering within the layered framework, as evidenced by an increased I 003 /I 104 intensity ratio of 1.4, indicative of suppressed cation mixing and improved Li-layer integrity. Spectroscopic and microstructural analyses confirm the successful incorporation of lanthanum into the transition-metal sublattice, while boron contributes to stabilizing the surface oxygen framework and mitigating interfacial reactivity. Density functional theory calculations further reveal that selective lanthanum substitution induces minimal lattice strain (∼0.11%), thereby stabilizing the layered structure against mechanical degradation and microcrack formation during repeated lithium insertion and extraction. As a result of improved structural coherence and defect suppression, the co-doped cathode exhibits enhanced cycling durability, retaining over 91% of its initial capacity after extended cycling at moderate rates. This study demonstrates that synergistic La–B co-doping effectively suppresses antisite defects, stabilizes lattice oxygen, and improves the durability of layered oxide cathodes.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Graphene research and applications · Transition Metal Oxide Nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Recent developments in lithium-manganese-nickel oxide electrochemistry: the alchemy of LiMn0.5Ni0.5O210.1149/1945-7111/adcbd8 ↗
2. Interphasial engineering for Ni-rich NMC cathode materials10.1016/j.trechm.2023.08.002 ↗
3. Precise regulation of particle orientation for Ni-rich cathodes with ultra-long cycle life10.1016/j.nanoen.2024.110008 ↗
4. State-of-Charge distribution of single-crystalline NMC532 cathodes in lithium-ion batteries: a critical look at the mesoscale10.1002/cssc.202201169 ↗
5. Navigating thermal stability intricacies of high-nickel cathodes for high-energy lithium batteries10.1038/s41560-025-01731-x ↗
6. Precision engineering of high-performance Ni-rich layered cathodes with radially aligned microstructure through architectural regulation of precursors10.1016/j.esci.2024.100276 ↗
7. Challenges and opportunities using Ni-rich layered oxide cathodes in Li-ion rechargeable batteries: the case of nickel cobalt manganese oxides10.1039/D3YA00631J ↗
8. Understanding structural and compositional evolution during NMC cathode direct recycling via solid-state NMR
9. Single-crystalline Ni-Rich LiNixMnyCo1−x−yO2 cathode materials: a perspective
10. Low-nickel cathode chemistry for sustainable and high-energy lithium-ion batteries10.1038/s41893-025-01704-8 ↗
11. Decoupling the roles of Ni and Co in anionic redox activity of Li-rich NMC cathodes10.1038/s41563-023-01679-x ↗
12. Slightly Li-enriched chemistry enabling super stable LiNi0.5Mn0.5O2 cathodes under extreme conditions10.1039/D4SC03805C ↗
13. Out-of-plane symmetry design arrests structural evolution in layered-type framework for sustainable sodium shuttling10.1021/jacs.5c10619 ↗
14. Hidden structural and chemical order controls lithium transport in cation-disordered oxides for rechargeable batteries10.1038/s41467-019-08490-w ↗
15. Revisiting high-valence dopant mechanisms in Ni-rich cathodes: cation ordering dominates over morphological alignment for enhanced stability10.1039/D5SC09030J ↗
16. Understanding the effect of cation disorder on the voltage profile of lithium transition-metal oxides10.1021/acs.chemmater.6b01438 ↗
17. Structures and electronic states of nickel-rich oxides for lithium ion batteries10.1039/D3MA00906H ↗
18. Beyond conventional doping: high-valence element integrated slight Li enrichment in Ni-Rich cathodes with high capacity and ultralong cycle life
19. Experimental considerations to study Li-excess disordered rock salt cathode materials10.1039/D0TA07836K ↗
20. Cation-disordered rocksalt transition metal oxides and oxyfluorides for high energy lithium-ion cathodes10.1039/C9EE02803J ↗
21. Improved electrochemical performance of the cation-disordered NMC cathode of lithium-ion batteries by lithium phosphate coating10.1021/acsaem.3c01064 ↗
22. Stoichiometrically driven disorder and local diffusion in NMC cathodes10.1039/D1TA01639C ↗
23. Theory of layered-oxide cathode degradation in Li-ion batteries by oxidation-induced cation disorder10.1149/1945-7111/ac9a09 ↗
24. Realizing continuous cation order-to-disorder tuning in a class of high-energy spinel-type Li-ion cathodes10.1016/j.matt.2021.10.013 ↗
25. Phase behavior during electrochemical cycling of Ni-Rich cathode materials for Li-Ion batteries10.1002/aenm.202003404 ↗
26. Impacts of lanthanum impurities on nickel-rich cathode materials10.1007/s40831-025-01206-z ↗
27. Integrated hierarchical lanthanum niobium oxide surface coating to stabilize high-voltage performance and suppress Ni2+/Li+ cationic disorder in nickel-rich layered cathodes10.1016/j.est.2024.114639 ↗
28. Understanding the enhancement effect of boron doping on the electrochemical performance of single-crystalline Ni-rich cathode materials10.1016/j.jcis.2021.07.027 ↗
29. Boron in Ni-Rich NCM811 cathode material: impact on atomic and microscale properties10.1021/acsaem.1c03000 ↗
30. Multifunctional carbon fiber–nanotube frameworks for safe, recyclable, high-performance lithium-ion batteries10.1002/bte2.20250061 ↗
31. Synergistic design of g-C3N4-supported CNTs: experimental and DFT insights for enhanced electrochemical performance in flexible Li–S batteries10.1039/D4TA00918E ↗
32. Nanolignin functional separators for flexible lithium–sulfur batteries with enhanced performance
33. QuantumATK: an integrated platform of electronic and atomic-scale modelling tools
34. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
35. First-principles linear combination of atomic orbitals method for the cohesive and structural properties of solids: application to diamond10.1103/PhysRevB.29.3470 ↗
36. Special points for Brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
37. A consistent and accurate ab initio parametrization of density functional dispersion correction (DFT-D) for the 94 elements H-Pu10.1063/1.3382344 ↗
38. La doping and coating enabled by one-step method for high performance Li1.2Mn0.54Ni0.13Co0.13O2 Li-rich cathode10.1007/s11581-020-03551-3 ↗
39. Surface-phase engineering via lanthanum doping enables enhanced electrochemical performance of Li-Rich layered cathode10.1021/acsaem.2c01295 ↗
40. Rational design of dual-ion doped cobalt-free Li-rich cathode materials for enhanced cycle stability of lithium-ion pouch cell batteries10.1039/D4NR01489H ↗
41. State and future implementation perspectives of porous carbon-based hybridized matrices for lithium sulfur battery10.1016/j.ccr.2023.215055 ↗
42. Synthesis and characterization of core–shell NMC microparticles as cathode materials for Li-ion batteries: insights from ex situ and in situ microscopy and spectroscopy techniques10.1039/D4MA00994K ↗
43. Charge compensation mechanisms in Ni-Rich NMC cathodes10.1002/batt.202500167 ↗
44. Advancing lithium-sulfur battery efficiency: utilizing a 2D/2D g-C3N4@MXene heterostructure to enhance sulfur evolution reactions and regulate polysulfides in lean electrolyte conditions10.1039/D4MH00200H ↗
45. Investigating surface reactivity of a Ni-Rich cathode material toward CO2, H2O, and O2 using ambient pressure X-ray photoelectron spectroscopy10.1021/acsaem.3c01621 ↗
46. Nickel and cobalt oxidation state evolution at Ni-Rich NMC cathode surfaces during treatment10.1021/acs.jpcc.0c04794 ↗
47. Dual-site cation codoping strategies mitigating H2–H3 phase transition for cycle stable nickel-rich layered oxide cathodes in lithium batteries
48. Magnesium doped LiNixMnyCozO2 cathode- structural properties10.1016/j.apsadv.2022.100350 ↗
49. Analytical techniques for studying cell aging in lithium–sulfur batteries10.1039/D4EB00006D ↗
50. On the use of electrochemical impedance spectroscopy to characterize and model the aging phenomena of lithium-ion batteries: a critical review10.1016/j.jpowsour.2021.229860 ↗
51. Modeling and applications of electrochemical impedance spectroscopy (EIS) for lithium-ion batteries10.33961/jecst.2019.00528 ↗
52. Chemically anchored lattice oxygen enables stability in layered sodium cathodes10.1021/acsenergylett.5c02129 ↗
53. Stabilizing lattice oxygen in Li-Rich layered cathodes by boron-doping induced anchoring effect10.1021/acs.jpclett.5c01214 ↗
54. Dopant-enhanced sodium and potassium-ion adsorption and diffusion in two-dimensional titanium disulfide10.1063/5.0132894 ↗
55. Tuning the adsorption and diffusion capabilities of titanium disulfide monolayers by doping and strain engineering: implications for lithium-ion batteries10.1016/j.apsusc.2022.154164 ↗
56. 3D printed PEKK-derived, laser-induced graphene anodes for −20 to 50° C operation in recyclable LMFP batteries10.1016/j.jechem.2026.04.032 ↗