Model predictive control for spatial–temporal temperature gradient constrained dynamic operation of a marine SOFC system
Source abstract
Abstract
The use of solid oxide fuel cells (SOFC) offers an alternative energy-conversion technology for the maritime sector, supporting the transition to renewable fuels. However, operating SOFCs for onboard power generation requires them to accommodate dynamic load changes, which introduces thermal stress, accelerates degradation, and reduces their operational lifetime. This work introduces a set of load-tracking model predictive control (MPC) strategies that reduce thermal stress by introducing spatial temperature gradient constraints (STGC), temporal temperature gradient constraints (TTGC) and temporal temperature gradient cost (TTGQ) components. The development of a spatially resolved one-dimensional prediction model for the SOFC stack is essential for incorporating these components into MPC strategies. The strategies are evaluated via simulations across multiple scenarios using key performance indicators (KPIs) for thermal stress, load-tracking performance and electrical efficiency, and benchmarked against a baseline MPC and a current-ramping-limit (CRL) approach. The results show that the STGC effectively reduces and constrains the spatial temperature gradient while maximising electrical efficiency. Furthermore, the TTGC and TTGQ strategies improve dynamic load-tracking response while resulting in lower temporal temperature gradients than a CRL.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Maritime Transport Emissions and Efficiency · Fuel Cells and Related Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. International Maritime Organization · 2020
2. How do variations in ship operation impact the techno-economic feasibility and environmental performance of fossil-free fuels? A life cycle study10.1016/j.apenergy.2023.121773 ↗
3. Techno-economic analysis of renewable fuels for ships carrying bulk cargo in Europe10.1038/s41560-021-00957-9 ↗
4. A comprehensive review on countermeasures for CO2 emissions from ships10.1016/j.rser.2020.110222 ↗
5. A review of fuel cell systems for maritime applications10.1016/j.jpowsour.2016.07.007 ↗
6. Solid oxide fuel cells for marine applications
7. A direct manufacturing cost model for solid-oxide fuel cell stacks10.1002/fuce.201700012 ↗
8. Braun · 2002
9. Steady-state and transient operation of solid oxide fuel cell systems with anode off-gas recirculation within a highly constrained operating range10.3390/en16237827 ↗
10. On the intrinsic transient capability and limitations of solid oxide fuel cell systems10.1016/j.jpowsour.2008.11.057 ↗
11. A review of heat transfer and thermal management methods for temperature gradient reduction in solid oxide fuel cell (SOFC) stacks10.1016/j.apenergy.2020.115899 ↗
12. Thermally driven SOFC degradation in 4D: Part II. Macroscale10.1149/2.0061811jes ↗
13. On characteristics and research development of coupled fuel cell stack performance and stress10.1016/j.apenergy.2025.125719 ↗
14. Dynamic modelling and control of planar anode-supported solid oxide fuel cell10.1016/j.compchemeng.2007.12.003 ↗
15. W. Frenkel, J. Kersten, R. Husmann, H. Aschemann, Design of Robust PID Controllers for SOFC Stacks, in: Proceedings of the 2022 IEEE Conference on Control Technology and Applications, CCTA, Trieste, Italy, 2022, pp. 510–515.10.1109/CCTA49430.2022.9966041 ↗
16. Model predictive control of the solid oxide fuel cell stack temperature with models based on experimental data10.1016/j.jpowsour.2014.11.126 ↗
17. Actuator limitations in spatial temperature control of SOFC10.1115/1.4024253 ↗
18. Novel solid oxide fuel cell system controller for rapid load following10.1016/j.jpowsour.2007.05.092 ↗
19. Control strategy for a solid oxide fuel cell and gas turbine hybrid system10.1016/j.jpowsour.2005.09.010 ↗
20. Dynamic modeling, simulation, and MIMO predictive control of a tubular solid oxide fuel cell10.1016/j.jprocont.2012.01.015 ↗
21. Modeling and control of tubular solid-oxide fuel cell systems: II. Nonlinear model reduction and model predictive control10.1016/j.jpowsour.2010.06.075 ↗
22. Nonlinear model predictive control based on the moving horizon state estimation for the solid oxide fuel cell10.1016/j.ijhydene.2008.02.063 ↗
23. Model predictive control for thermal stress-aware power modulation of solid oxide fuel cell systems10.1016/j.enconman.2025.120395 ↗
24. Nonlinear model predictive control of direct internal reforming solid oxide fuel cells via PDAE-constrained dynamic optimization10.1016/j.apenergy.2024.122804 ↗
25. Model predictive control of a one-dimensional methane reforming solid oxide fuel cell system based on Modelica/SIMULINK co-simulation10.1016/j.renene.2025.123954 ↗
26. Controlling spatial temperature variation in a rapid load following SOFC
27. Simulation of thermal stresses in anode-supported solid oxide fuel cell stacks. Part I: Probability of failure of the cells10.1016/j.jpowsour.2008.12.050 ↗
28. Dynamic modelling of a direct internal reforming solid oxide fuel cell stack based on single cell experiments10.1016/j.apenergy.2019.05.053 ↗
29. Marra · 2016
30. Stiller · 2006
31. Biegler · 2010
32. S.G. (D), Technical Documentation Integrated Stack Module (ISM), Tech. Rep..
33. CasADi – A software framework for nonlinear optimization and optimal control10.1007/s12532-018-0139-4 ↗
34. Fatrop: A fast constrained optimal control problem solver for robot trajectory optimization and control
35. Implementation of Model Predictive Control in Programmable Logic Controllers10.1109/TCST.2020.2992959 ↗
36. A Real-Time Iteration Scheme for Nonlinear Optimization in Optimal Feedback Control10.1137/S0363012902400713 ↗