MXene-derived TiO2@MXene nanocomposite cathodes for dual-salt magnesium/lithium-ion batteries
Source abstract
Abstract
Magnesium-ion batteries offer a safer, cheaper alternative to lithium-ion systems thanks to magnesium's abundance, higher charge density, and a metal anode that's far less prone to dendrite formation. However, their practical application is hindered by sluggish ion diffusion kinetics and strong electrostatic interactions of magnesium ions, which significantly reduce cathode performance. To address these challenges, this study introduces a hybrid Mg/Li-ion battery featuring a uniquely engineered nanocomposite cathode of two-dimensional Ti 3 C 2 T x MXene decorated with TiO 2 nanoparticles (MD-TiO 2 @MXene400) and a dual-salt electrolyte. The nanocomposite cathode material is obtained by partially oxidizing Ti 3 C 2 T x MXene at 400 °C. This optimized cathode material delivers a high specific capacity of ∼208 mAh g −1 at 20 mA g −1 (about twice that of pristine MXene) and maintains excellent cycling stability, with 159 mAh g −1 retained after 300 cycles at 100 mA g −1 . The superior performance arises from the synergistic combination of conductive MXene layers and electrochemically active TiO 2 nanoparticles, which together mitigate sluggish ion transport and enhance structural stability. These findings highlight MXene-derived TiO 2 composites as promising cathode materials for next-generation multivalent hybrid batteries.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: MXene and MAX Phase Materials · Advancements in Battery Materials · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Electrical energy storage for the grid: a battery of choices10.1126/science.1212741 ↗
2. 30 years of lithium‐ion batteries
3. Building better batteries10.1038/451652a ↗
4. Recent progress of flexible aqueous multivalent ion batteries10.1002/cey2.178 ↗
5. Multivalent rechargeable batteries10.1016/j.ensm.2019.04.012 ↗
6. Quest for nonaqueous multivalent secondary batteries: magnesium and beyond10.1021/cr500049y ↗
7. Magnesium batteries: current picture and missing pieces of the puzzle10.1016/j.jpowsour.2020.229027 ↗
8. Recent progress in the applications of MXene‐based materials in multivalent ion batteries10.1002/smll.202404093 ↗
9. Aqueous rechargeable multivalent metal‐ion batteries: advances and challenges10.1002/aenm.202100608 ↗
10. Cathode materials for magnesium and magnesium-ion based batteries10.1016/j.ccr.2014.11.005 ↗
11. Mg-ion battery electrode: an organic solid's herringbone structure squeezed upon Mg-ion insertion10.1021/jacs.7b06313 ↗
12. High-capacity nanostructured manganese dioxide cathode for rechargeable magnesium ion batteries10.1016/j.jpowsour.2014.07.162 ↗
13. Cathode design for aqueous rechargeable multivalent ion batteries: challenges and opportunities
14. Synergistic cathode design for high‐performance dual‐salt magnesium/lithium‐ion batteries using 2D/2D 1T/2H‐MoS2@Ti3C2Tx MXene nanocomposite
15. Dual‐salt mg‐based batteries with conversion cathodes10.1002/adfm.201503639 ↗
16. Fast diffusion of multivalent ions facilitated by concerted interactions in dual‐ion battery systems10.1002/aenm.201801475 ↗
17. Prelithiation activates Fe2 (MoO4)3 cathode for rechargeable hybrid Mg2+/Li+ batteries10.1021/acsami.7b10705 ↗
18. Unraveling the Mg2+/Li+ dual-ion co-intercalation mechanism in 3D MXene heterojunctions for enhanced Mg/Li hybrid ion battery performance
19. Improving rechargeable magnesium batteries through dual cation co-intercalation strategy10.1038/s41467-023-44495-2 ↗
20. Controlling the intercalation chemistry to design high-performance dual-salt hybrid rechargeable batteries10.1021/ja508463z ↗
21. High areal capacity hybrid magnesium–lithium-ion battery with 99.9% coulombic efficiency for large-scale energy storage10.1021/acsami.5b01206 ↗
22. Mg rechargeable batteries: an on-going challenge10.1039/c3ee40871j ↗
23. Rechargeable Mg–Li hybrid batteries: status and challenges10.1557/jmr.2016.331 ↗
24. MXene-based materials for multivalent metal-ion batteries10.3390/batteries9030174 ↗
25. Pillar‐structured Ti3C2Tx MXene with engineered interlayer spacing for high‐performance magnesium batteries10.1002/smtd.202400004 ↗
26. Ti3C2Tx MXene polymer composites for anticorrosion: an overview and perspective10.1021/acsami.2c11953 ↗
27. MXene‐based current collectors for advanced rechargeable batteries
28. Opening magnesium storage capability of two-dimensional MXene by intercalation of cationic surfactant10.1021/acsnano.8b00959 ↗
29. Pursuit of a high-capacity and long-life Mg-storage cathode by tailoring sandwich-structured MXene@ carbon nanosphere composites10.1039/C9TA02212K ↗
30. VS4 anchored on Ti3C2 MXene as a high-performance cathode material for magnesium ion battery10.1016/j.jpowsour.2021.230731 ↗
31. Two-dimensional titanium carbide MXene as a cathode material for hybrid magnesium/lithium-ion batteries10.1021/acsami.6b04198 ↗
32. Recent developments in the doped-Li4Ti5O12 anode materials of lithium-ion batteries for improving the rate capability10.1016/S1452-3981(23)14775-4 ↗
33. Titanium‐based anode materials for safe lithium‐ion batteries10.1002/adfm.201200698 ↗
34. Sustained lithium‐storage performance of hierarchical, nanoporous anatase TiO2 at high rates: emphasis on interfacial storage phenomena10.1002/adfm.201002527 ↗
35. Recent progress of TiO2‐based anodes for Li ion batteries10.1155/2016/8123652 ↗
36. Advanced titania nanostructures and composites for lithium ion battery10.1007/s10853-011-5974-x ↗
37. Capture and catalytic conversion of polysulfides by in situ built TiO2‐MXene heterostructures for lithium–sulfur batteries10.1002/aenm.201900219 ↗
38. Guidelines for synthesis and processing of two-dimensional titanium carbide (Ti3C2Tx MXene)10.1021/acs.chemmater.7b02847 ↗
39. Atomic defects in monolayer titanium carbide (Ti3C2Tx) MXene10.1021/acsnano.6b05240 ↗
40. Effect of synthesis on quality, electronic properties and environmental stability of individual monolayer Ti3C2 MXene flakes10.1002/aelm.201600255 ↗
41. Conductive two-dimensional titanium carbide ‘clay’ with high volumetric capacitance10.1038/nature13970 ↗
42. In situ growth intercalation structure MXene@ anatase/rutile TiO2 ternary heterojunction with excellent phosphoprotein detection in sweat10.3390/bios12100865 ↗
43. Electron diffraction analysis of polycrystalline and amorphous thin films10.1107/S0108767388004957 ↗
44. Thermal self-crosslink after etching for regulated preparation of Ti3C2 type MXene membrane and its preliminary gas separation
45. Monitoring Ti3C2Tx MXene degradation pathways using raman spectroscopy10.1021/acsnano.4c02150 ↗
46. Review of the anatase to rutile phase transformation10.1007/s10853-010-5113-0 ↗
47. On crystallite size dependence of phase stability of nanocrystalline TiO210.1063/1.1604966 ↗
48. Improved calculation of Li and Na intercalation properties in anatase, rutile, and TiO2 (B)10.1021/acs.jpcc.6b08842 ↗
49. Theoretical study of lithium intercalation in rutile and anatase10.1103/PhysRevB.53.159 ↗
50. Crystallite size dependence of lithium intercalation in nanocrystalline rutile10.1021/jp8087995 ↗
51. Nanostructured anatase TiO2 as anode of high‐performance lithium‐ion batteries10.1002/bte2.20220018 ↗
52. Synthesis and Li-ion insertion properties of highly crystalline mesoporous rutile TiO210.1021/cm8002589 ↗
53. Atomistic insights into lithium storage mechanisms in anatase, rutile, and amorphous TiO2 electrodes10.1021/acsami.0c17097 ↗
54. Partially oxidized Ti3C2Tx MXene-sensitive material-based ammonia gas sensor with high-sensing performances for room temperature application10.1007/s10854-021-07166-w ↗
55. Electrodeposition of a Ni–P–TiO2/Ti3C2Tx coating with in situ grown nanoparticles TiO2 on Ti3C2Tx sheets10.3390/coatings9110750 ↗
56. In situ synthesis of CNTs@Ti3C2 hybrid structures by microwave irradiation for high-performance anodes in lithium ion batteries10.1039/C7TA10394H ↗
57. Single nanocrystals of anatase-type TiO2 prepared from layered titanate nanosheets: formation mechanism and characterization of surface properties10.1021/la701632t ↗
58. Crystallinity integration of anatase (TiO2) nanocrystal by whole powder pattern fitting (WPPF) method: a rietveld refinement study
59. Electrochemical and structural investigations of different polymorphs of TiO2 in magnesium and hybrid lithium/magnesium batteries10.1016/j.electacta.2018.04.200 ↗
60. Cyclic voltammetry—“electrochemical spectroscopy”. New analytical methods (25)10.1002/anie.198408313 ↗
61. Mg2+ storage and mobility in anatase TiO2: the role of frustrated coordination10.1039/C8TA09939A ↗
62. 1T‐2H mixed‐phase MoS2 stabilized with a hyperbranched polyethylene ionomer for Mg2+/Li+ co‐intercalation toward high‐capacity dual‐salt batteries10.1002/smll.202304878 ↗
63. Advanced MoS2 nanocomposites for post-lithium-ion batteries10.1016/j.cej.2024.156872 ↗
64. Bandgap tuned and oxygen vacant TiO2−x anode materials with enhanced electrochemical properties for lithium ion batteries10.1016/j.jiec.2018.11.020 ↗
65. Review on comprehending and enhancing the initial coulombic efficiency of anode materials in lithium-ion/sodium-ion batteries10.1016/j.nanoen.2020.105143 ↗
66. High-rate electrochemical energy storage through Li+ intercalation pseudocapacitance10.1038/nmat3601 ↗
67. Advanced energy storage devices: basic principles, analytical methods, and rational materials design10.1002/advs.201700322 ↗