journal article·2026-08

Improvements in ion redox activity and structural stability in biphasic layered oxide enabled by Li/Ti co-doping

Jian Liu, Jinpin Wu, Zongyu Guan, Jihuan Xie, Xu Li, Zhangwen Sun, Junhang Tian, Xueyi Sun, Weidong Zhuang

Publisher page

Abstract

P2/O3 biphasic layered transition metal oxides (NaxTMO2) are promising cathode materials for sodium-ion batteries (SIBs). However, irreversible phase transitions, restrict their practical application in SIBs. Here, we employ a Li/Ti co-doping strategy to modify local structure of transition metal-oxygen (TM–O) bonds, suppressing the formation of O2 and O3' phases during charge-discharge cycles. This enhances the structural stability of the cathode material and improves its cycling performance. Additionally, Li/Ti co-doping optimizes the charge compensation mechanism, boosting the redox activity of transition metal ions and oxygen anions, thereby increasing discharge capacity. The Na0.7Li0.1Ni0.12Fe0.18Mn0.5Ti0.1O2 (LNFMT) cathode exhibits a high reversible discharge capacity of 166.0 mAh g−1 at 0.1C (2.0-4.2V), which is higher than 133.0 mAh g−1 of NFM. After 100 cycles at 1C, the cosubstituted LNFMT shows a capacity retention of 98.2%, which is higher than 61.69% of NFM. Meanwhile, Li/Ti co-doping improves the rate performance due the larger sodium layer spacing. This study elucidates the mechanism by which Li/Ti co-doping stabilizes the P2/O3 biphasic cathode, offering valuable insights for the rational regulation of high-performance cathode materials for SIBs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Transition Metal Oxide Nanomaterials · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Low-cost orthorhombic Na x [FeTi] O4 (x= 1 and 4/3) compounds as anode materials for sodium-ion batteries10.1021/acs.chemmater.5b01135 ↗
2. Layered oxide cathodes for sodium‐ion batteries: phase transition, air stability, and performance10.1002/aenm.201701912 ↗
3. Sodium-ion batteries: present and future10.1039/C6CS00776G ↗
4. Prospective sustainability screening of sodium‐ion battery cathode materials10.1002/aenm.202202636 ↗
5. A comprehensive review of sodium layered oxides: powerful cathodes for Na-ion batteries10.1039/C4EE03192J ↗
6. Direct observation of alternating octahedral and prismatic sodium layers in O3‐Type transition metal oxides10.1002/aenm.202001151 ↗
7. Structure evolution of layered transition metal oxide cathode materials for Na-ion batteries: issues, mechanism and strategies10.1016/j.mattod.2022.11.024 ↗
8. Origins of bistability and Na ion mobility difference in P2‐ and O3‐Na2/3Fe2/3Mn1/3O2 cathode polymorphs10.1002/aenm.201601477 ↗
9. An approach to overcome first cycle irreversible capacity in P2-Na2/3[Fe1/2Mn1/2]O210.1016/j.elecom.2013.10.008 ↗
10. Cycling performance of layered oxide cathode materials for sodium-ion batteries10.1007/s12613-023-2776-5 ↗
11. Chemical approach to raise cell voltage and suppress phase transition in O3 sodium layered oxide electrodes10.1002/aenm.201702599 ↗
12. Deciphering the role of optimal P2/O3 phase fraction in enhanced cyclability and specific capacity of layered oxide cathodes10.1016/j.cej.2024.149921 ↗
13. Interlocking biphasic chemistry for high-voltage P2/O3 sodium layered oxide cathode10.1016/j.ensm.2022.06.012 ↗
14. Recent advances in Mn‐rich layered materials for sodium‐ion batteries10.1002/adfm.202212607 ↗
15. Unlocking anionic redox activity in O3-type sodium 3 d layered oxides via Li substitution10.1038/s41563-020-00870-8 ↗
16. Regulating the local electronic structure of low-cost Fe/Mn-based layered oxide cathodes for rapid and stable sodium storage10.1016/j.jechem.2025.10.007 ↗
17. Properties of rich-nae effect and zero-phase transition in P2–Na0. 67 (Ni0. 1Mn0. 8Fe0. 1) 1–x Mg x O2 cathodes for rapid and stable sodium storage10.1021/acssuschemeng.4c07004 ↗
18. Advances in doping strategies for sodium transition metal oxides cathodes: a review10.1007/s11708-024-0918-8 ↗
19. Computational screening of dopants for mitigating degradation behaviors in sodium-ion layered oxide cathode material10.1016/j.jallcom.2020.157785 ↗
20. A synergistic Cu/Ca dual‐doping strategy for high‐stability and fast‐charging O3‐Type cathode in sodium‐ion batteries
21. P2/O3 biphasic Fe/Mn based cathodes for simultaneously realizing kinetic-enhancement and air-stabilization10.1016/j.cej.2025.161765 ↗
22. Transforming residual alkali into an oxygen vacancy coating to enable high-rate layered oxide cathodes for sodium-ion batteries
23. Tailoring electronic structure to achieve maximum utilization of transition metal redox for high-entropy Na layered oxide cathodes10.1021/jacs.3c00879 ↗
24. High capacity O3-Type Na[Li0.05(Ni0.25Fe0.25Mn0.5)0.95]O2 cathode for sodium ion batteries10.1021/cm502481b ↗
25. Chemical approach to raise cell voltage and suppress phase transition in O3 sodium layered oxide electrodes10.1002/aenm.201702599 ↗
26. Manipulating O3/P2 phase ratio in bi-phasic sodium layered oxides via ionic radius control10.1038/s43246-023-00337-8 ↗
27. Critical role of titanium in O3-type layered cathode materials for sodium-ion batteries10.1021/acsami.9b08987 ↗
28. Influence of Li substitution on the structure and electrochemical performance of P2-type Na0.67Ni0.2Fe0.15Mn0.65O2 cathode materials for sodium ion batteries10.1016/j.jpowsour.2018.06.058 ↗
29. Exploring the working mechanism of Li+ in O3-type NaLi0.1Ni0.35Mn0.55O2 cathode materials for rechargeable Na-ion batteries10.1039/C6TA02230H ↗
30. Layered P2–O3 sodium-ion cathodes derived from earth abundant elements10.1039/C7TA11180K ↗
31. A layered P2and O3-type composite as a high-energy cathode for rechargeable sodium-ion batteries10.1002/anie.201411788 ↗
32. Study on the reversible electrode reaction of Na1−xNi0.5Mn0.5O2 for a rechargeable sodium-ion battery10.1021/ic300357d ↗
33. Improved electrochemical performance of Fe-Substituted NaNi0.5Mn0.5O2 cathode materials for sodium-ion batteries10.1021/acsami.5b00594 ↗
34. Review on layered oxide cathodes for sodium‐ion batteries: degradation mechanisms, modification strategies, and applications
35. Unlocking anionic redox activity in O3-type sodium 3d layered oxides via Li substitution10.1038/s41563-020-00870-8 ↗
36. Slow-released cationic redox activity promoted stable anionic redox and suppressed jahn–teller distortion in layered sodium manganese oxides10.1021/acsami.3c16320 ↗
37. High-entropy P2/O3 biphasic cathode materials for wide-temperature rechargeable sodium-ion batteries10.1016/j.ensm.2023.03.007 ↗
38. P2/O3 biphase integration promoting the enhancement of structural stability for sodium layered oxide cathode10.1016/j.cej.2023.147964 ↗
39. Mitigating mechanical stress by the hierarchical crystalline domain for high-energy P2/O3 biphasic cathode materials10.1021/acsnano.4c09918 ↗
40. Determination of the kinetic parameters of mixed-conducting electrodes and application to the system Li3Sb10.1149/1.2133112 ↗
41. Reaching the energy density limit of layered O3-NaNi0.5Mn0.5O2 electrodes via dual Cu and Ti substitution10.1002/aenm.201901785 ↗
42. Boron-doped sodium layered oxide for reversible oxygen redox reaction in Na-ion battery cathodes10.1038/s41467-021-25610-7 ↗
43. A new Tin-based O3Na0.9[Ni0.45−x/2MnxSn0.55−x/2]O2 as sodium-ion battery cathode10.1016/j.jechem.2018.05.019 ↗
44. Manipulating of P2/O3 composite sodium layered oxide cathode through Ti substitution and synthesis temperature10.3390/nano13081349 ↗
45. Unravelling the structure-stability interplay of O3-type layered sodium cathode materials via precision spacing engineering10.1038/s41467-025-57378-5 ↗
46. Revisiting the Na2/3Ni1/3Mn2/3O2 cathode: oxygen redox chemistry and oxygen release suppression10.1021/acscentsci.9b01166 ↗
47. Synergetic anion-cation redox ensures a highly stable layered cathode for sodium-ion batteries
48. A “seat-squatting” strategy via lithium substitution to suppress Fe-migration in Na layered oxide cathodes10.1039/D4EE01867B ↗
49. Enabling stable and nonhysteretic oxygen redox capacity in li‐excess Na layered oxides
50. Progress of anion redox in Na-rich layered transition metal oxides (Na2MO3) as cathode materials for sodium-ion batteries10.1088/1361-648X/ad9f06 ↗
51. Prototype sodium‐ion batteries using an air‐stable and Co/Ni‐free O3‐layered metal oxide cathode10.1002/adma.201502449 ↗
52. Oxygen redox promoted by Na excess and covalency in hexagonal and monoclinic Na2-xRuO3 polymorphs10.1149/2.0521903jes ↗