journal article·2026-08Open access

Direct-ink writing printed cathodes based on different active materials for lithium-ion batteries

Rafael S. Pinto, Francisco Macedo, Maria M. Silva, Carlos M. Costa, Senentxu Lanceros-Mendez, Renato Gonçalves

Abstract

Rising demand for portable electronic leads to development of energy storage systems with improved energy-/power-density. In this work, it is proposed the use of different active materials allied to Direct-Ink Writing (DIW) printing technology for the development of lithium-ion batteries cathodes. LiFePO 4 , LiMn 2 O 4 and LiCoO 2 active materials were used to produce cathodes based on Doctor Blade (DB) and DIW processing techniques to assess the influence of active filler and preparation technique on cathode's characteristics. The results demonstrate that the DIW processing technique allows to improve cathode properties also allowing the possibility of new designs and shapes necessary for portable applications. DIW induces a smooth morphology on cathode surface, lowering the presence of cracks, for the same preparation conditions as in DB. An increase of apparent lithium-ion diffusion coefficient for LiFePO 4 and LiMn 2 O 4 was observed in DIW samples, where LiFePO 4 increase from 1.71 × 10 −7 cm 2 s −1 (DB) to 3.70 × 10 −7 cm 2 s −1 (DIW). Half-cells performance demonstrated an improved or very similar discharge capacities for the samples prepared by DIW, compared to DB. LiFePO 4 cathode discharge capacities of 134.8 mAh.g −1 (DB) and 137.5 mAh.g −1 (DIW) at C/8-rate is observed. The study demonstrates the capability of DIW technique to produce customized, flexible and high-performance cathodes.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Dielectric materials and actuators · Nanomaterials and Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Current challenges and future opportunities toward recycling of spent lithium-ion batteries10.1016/j.rser.2022.112202 ↗
2. Resynthesizing of lithium cobalt oxide from spent lithium-ion batteries using an environmentally benign and economically viable recycling process10.1016/j.hydromet.2020.105430 ↗
3. Solid-State rechargeable lithium-ion batteries: component chemistries and battery architectures
4. The present applications and prospects of lithium-ion battery
5. Chelate reconstruction with a H2O-poor and zinc-rich interface toward robust anti-corrosion Ah-level zinc aqueous batteries
6. Polydentate ligand stabilizes electrolyte and interface layer for anti-corrosion and selective-deposited Zn metal aqueous batteries10.1002/adfm.202423945 ↗
7. Beyond lithium-ion batteries: recent developments in polymer-based electrolytes for alternative metal-ion-batteries
8. A forum on batteries: from lithium-ion to the next generation10.1093/nsr/nwaa068 ↗
9. Current research trends and prospects among the various materials and designs used in lithium-based batteries10.1007/s10800-013-0533-6 ↗
10. Cathode materials for rechargeable lithium batteries: recent progress and future prospects10.1016/j.est.2021.103534 ↗
11. 3D printed lithium-ion batteries: an in-depth examination of the advancements in flexibility and stand-alone capability10.1016/j.est.2023.110395 ↗
12. Design and manufacture of 3D-Printed batteries10.1016/j.joule.2020.11.010 ↗
13. Direct-ink writing 3D printed energy storage devices: from material selectivity, design and optimization strategies to diverse applications10.1016/j.mattod.2022.03.014 ↗
14. High-performance, printable quasi-solid-state electrolytes toward all 3D direct ink writing of shape-versatile Li-ion batteries10.1016/j.ensm.2023.02.016 ↗
15. Recent advances on materials for lithium-ion batteries10.3390/en14113145 ↗
16. Comparative study on the electrochemical performance of LiFePO4 cathodes fabricated by low temperature 3D printing, direct ink writing and conventional roller coating process10.1016/j.ceramint.2019.04.124 ↗
17. Preparation of lithium iron phosphate battery by 3D printing10.1016/j.ceramint.2024.01.389 ↗
18. 3D printing PEDOT-CMC-based high areal capacity electrodes for Li-ion batteries10.1007/s11581-021-04063-4 ↗
19. Novel approaches in 3D printing techniques for the development of high-performance micro-batteries10.1007/s11664-024-11659-9 ↗
20. Optimization of LiCoO2 thick electrodes with low tortuosity for lithium-ion batteries by 3D printing10.1039/D5TA00723B ↗
21. Additive manufacturing of aqueous-processed LiMn2O4 thick electrodes for high-energy-density lithium-ion batteries10.1002/batt.202000058 ↗
22. Influence of solvent evaporation rate in the preparation of carbon-coated Lithium Iron phosphate cathode films on battery performance
23. Extremum method: inverse solution of the two-layer thermal wave problem10.1063/1.2058180 ↗
24. Analysis of multifunctional oxycarbide and oxynitride thin films by modulated IR radiometry10.1088/0022-3727/43/39/395301 ↗
25. Evaluation of apparent lithium-ion diffusion coefficients in FePO4/LiFePO4 cathode material particles from linear non-equilibrium thermodynamics and principle of electroneutrality10.1016/j.jelechem.2016.01.018 ↗
26. Poly(vinylidene fluoride-trifluoroethylene-chlorofluoroethylene): a new binder for conventional and printable lithium-ion batteries10.1021/acsaem.1c02897 ↗
27. Direct ink writing of conductive materials for emerging energy storage systems10.1007/s12274-022-4200-2 ↗
28. Effect of nanostructured and open-porous particle morphology on electrode processing and electrochemical performance of Li-Ion batteries10.1021/acsaem.0c03187 ↗
29. Modelling optimum thickness and architecture for lithium-ion battery cathodes10.1016/j.jpowsour.2024.235005 ↗
30. A guide to Li-Ion coin-cell electrode making for academic researchers10.1149/1.3515072 ↗
31. Designing cathodes and cathode active materials for solid-state batteries10.1002/aenm.202201425 ↗
32. Investigation of LiFePO4/MWCNT cathode-based half-cell lithium-ion batteries in subzero temperature environments10.1007/s11581-023-04953-9 ↗
33. In situ coating on LiFePO4 with ionic liquid as carbon source for high-performance lithium batteries10.1007/s11051-018-4298-z ↗
34. Electrochemical performance of LiFePO4/GO composite for Li-ion batteries10.1016/j.ceramint.2018.01.114 ↗
35. Nanoscaled LiMn2O4 for extended cycling stability in the 3 V Plateau10.1021/acsami.2c10798 ↗
36. Detrimental MnPO4F and MnF2 formation on LiMn2O4 in the 3 V region10.1039/D1TA06227A ↗
37. 3D-printed activated carbon cross-linked graphene oxide networks as high areal capacity and energy density electrode for lithium-ion batteries10.1016/j.est.2025.119454 ↗
38. Electrochemical surface passivation of LiCoO2 particles at ultrahigh voltage and its applications in lithium-based batteries10.1038/s41467-018-07296-6 ↗
39. Polarization effects and aging characterization of lithium-ion batteries for second life applications10.1016/j.jpowsour.2025.237931 ↗
40. Improving rate performance of LiFePO4 cathode materials by hybrid coating of nano-Li3PO4 and carbon10.1016/j.jallcom.2013.03.041 ↗
41. Fiber optic monitoring of composite Lithium iron phosphate cathodes in pouch cell batteries10.1021/acsaem.1c03304 ↗
42. Origin of electrochemical voltage range and voltage profile of insertion electrodes10.1038/s41598-024-65230-x ↗
43. Identifying cathode and anode polarizations during practical high-rate charging/discharging in different Li-ion pouch batteries10.1002/bte2.20220025 ↗
44. Application of electrochemical impedance spectroscopy to commercial Li-ion cells: a review10.1016/j.jpowsour.2020.228742 ↗
45. Characterisation of batteries by electrochemical impedance spectroscopy10.1016/j.egyr.2020.03.029 ↗
46. Modeling and applications of Electrochemical Impedance Spectroscopy (EIS) for lithium-ion batteries10.33961/jecst.2019.00528 ↗
47. Comparative study on the calendar aging behavior of six different lithium-ion cell chemistries in terms of parameter variation10.3390/en14113358 ↗
48. Composite batteries: a simple yet universal approach to 3D printable lithium-ion battery electrodes10.1039/C6TA07610F ↗
49. A hybrid three-dimensionally structured electrode for lithium-ion batteries via 3D printing10.1016/j.matdes.2017.01.088 ↗
50. Thermophysical properties of LiFePO4 cathodes with carbonized pitch coatings and organic binders: experiments and first-principles modeling10.1016/j.jpowsour.2013.11.022 ↗
51. Effect of the active material type and battery geometry on the thermal behavior of lithium-ion batteries10.1016/j.energy.2019.07.099 ↗
52. Effective thermal conductivity of lithium-ion battery electrodes in dependence on the degree of calendering10.1002/ente.202300259 ↗
53. Direct ink writing 3D printing for high-performance electrochemical energy storage devices: a minireview10.1002/advs.202303716 ↗