Hollow Fe3O4 spheres as functional architectures for advanced Li–O2 batteries
Source abstract
Abstract
Although the catalyst intrinsic catalytic activity is crucial for enhancing the performance of Li–O 2 batteries, its morphology also plays a significant role. Bulk catalysts often show limited catalytic efficiency, likely due to their large particle size and low specific surface area. As is well known, highly efficient catalysts require high surface area and a greater number of active sites. In this frame, this work reports the use of Fe 3 O 4 hollow spheres obtained through ALD deposition technique onto sacrificial PVP nanoparticles as catalyst for Li–O 2 batteries. Rotating disk electrode studies show the catalyst ability to shift the oxygen reduction reaction (ORR) from a 2 to a 2 + 2 electrons mechanism. Further studies in classical Li–O 2 cell set-up using DMSO with LiTFSI 0.5 M as liquid electrolyte, indicate that the catalyst allows to modify the Li 2 O 2 formation pathway upon discharge, from solution to surface growth. This results in higher reversibility and slower DMSO degradation upon cycling visible through a larger full cell capacity (5.9 against 5.1 mAh cm −2 for a standard cell), but above all an almost three-fold increase of the cycle life (from 45 to 130 cycles, corresponding to approximately 1300 h of operation) at 0.1 mA cm −2 and at the curtailed capacity of 0.5 mAh cm −2 .
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Extraction and Separation Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Li–O2 and Li–S batteries with high energy storage10.1038/nmat3191 ↗
2. Recent progress and perspectives on lithium and non-lithium rechargeable battery systems10.1016/j.jpowsour.2025.237362 ↗
3. Metal–air batteries: a review on current status and future applications10.1016/j.pnsc.2023.05.007 ↗
4. Advances in bifunctional electrocatalysts towards high-performing Li-air batteries10.1016/j.jpowsour.2024.234553 ↗
5. Advances in cathode materials for Li-O2 batteries10.1016/j.jechem.2024.03.016 ↗
6. Recent progress in cathode catalyst for nonaqueous lithium oxygen batteries: a review10.1007/s42114-022-00500-8 ↗
7. Combining accurate O 2 and li 2 O 2 assays to separate discharge and charge stability limitations in nonaqueous Li–O 2 batteries10.1021/jz401659f ↗
8. Lithium–Oxygen batteries and related systems: potential, status, and future10.1021/acs.chemrev.9b00609 ↗
9. Solvating additives drive solution-mediated electrochemistry and enhance toroid growth in non-aqueous Li–O2 batteries10.1038/nchem.2132 ↗
10. Mechanistic insights for the development of Li–O 2 battery materials: addressing Li 2 O 2 conductivity limitations and electrolyte and cathode instabilities10.1039/C5CC04620C ↗
11. Recent progress on defect‐rich transition metal oxides and their energy‐related applications10.1002/asia.202000925 ↗
12. Oxygen reduction in alkaline media: from mechanisms to recent advances of catalysts10.1021/acscatal.5b00524 ↗
13. Oxygen reduction reactions of catalysts with asymmetric atomic structures: mechanisms, applications, and challenges10.3390/catal15070615 ↗
14. Transition metal-based electrocatalysts for alkaline oxygen evolution reaction: developments, challenges, and perspectives
15. Advances in iron-based electrocatalysts for oxygen evolution in alkaline water splitting: atomic, bimetallic, and high-entropy materials10.1016/j.jelechem.2025.119374 ↗
16. Electrospun Pd-doped mesoporous carbon nano fibres as catalysts for rechargeable Li–O 2 batteries10.1039/C6RA09721A ↗
17. Alkaline oxygen reduction/evolution reaction electrocatalysis: a critical review focus on orbital structure, non-noble metal catalysts, and descriptors10.1016/j.cej.2024.155005 ↗
18. Synthesis, properties, and applications of Fe3O4 and Fe3O4-based nanocomposites: a review
19. Facile synthesis multifaceted Fe3O4 based on N-doped porous carbon frameworks for ORR/OER and study of an external magnetic field10.1016/j.electacta.2025.147319 ↗
20. Static magnetic field-enhanced cathodic electrocatalysis of Fe3O4-based nitrogen-doped carbon for improving the performance of microbial fuel cells10.1016/j.biortech.2025.132345 ↗
21. Fe3O4 encapsulated in hierarchically porous nitrogen-doped graphitic carbon layers for efficient oxygen reduction reaction: enhanced intrinsic activity via directional interfacial charge transfer10.1016/j.jcis.2024.10.122 ↗
22. Improving the oxygen evolution reaction on Fe 3 O 4 (001) with single-atom catalysts10.1021/acscatal.3c00337 ↗
23. Atomic layer deposition and other thin film deposition techniques: from principles to film properties10.1016/j.jmrt.2022.10.064 ↗
24. Atomic layer deposition of amorphous oxygen-deficient TiO2-x on carbon nanotubes as cathode materials for lithium-air batteries10.1016/j.jpowsour.2017.05.094 ↗
25. Atomic layered deposition iron oxide on perovskite LaNiO3 as an efficient and robust bi-functional catalyst for lithium oxygen batteries10.1016/j.electacta.2018.05.161 ↗
26. Surface chemistry of LiNi0.5Mn1.5O4 particles coated by Al2O3 using atomic layer deposition for lithium-ion batteries10.1016/j.jpowsour.2014.10.207 ↗
27. Atomic-layer-deposited iron oxide on arrays of metal/carbon spheres and their application for electrocatalysis10.1016/j.nanoen.2015.12.015 ↗
28. Hollow iron oxide nanospheres obtained through a combination of atomic layer deposition and electrospraying technologies10.3390/nano12183180 ↗
29. Sustainable, economic, and simple preparation of an efficient catalyst for Li-O2 batteries10.1016/j.jpowsour.2022.231942 ↗
30. Electrocatalytic performances of LaNi1−Mg O3 perovskite oxides as bi-functional catalysts for lithium air batteries10.1016/j.jpowsour.2014.04.096 ↗
31. Atomically dispersed metal catalysts for the oxygen reduction reaction: synthesis, characterization, reaction mechanisms and electrochemical energy applications10.1039/C9EE01722D ↗
32. Hierarchical mesoporous perovskite La 0 .5 Sr 0.5 CoO 2.91 nanowires with ultrahigh capacity for Li-air batteries10.1073/pnas.1210315109 ↗
33. Effect of aggregate size and film quality on the electrochemical properties of non-noble metal catalysts in rotating ring disk electrode measurements10.1016/j.electacta.2023.142024 ↗
34. Discharge characteristic of a non-aqueous electrolyte Li/O2 battery10.1016/j.jpowsour.2009.08.088 ↗
35. Current density dependence of peroxide formation in the Li–O2 battery and its effect on charge10.1039/c3ee40697k ↗
36. A highly active nanostructured metallic oxide cathode for aprotic Li–O 2 batteries10.1039/C4EE02587C ↗
37. Enhanced charge transport in amorphous li 2 O 210.1021/cm5007372 ↗
38. Oxidation of dimethyl sulfoxide solutions by electrochemical reduction of oxygen10.1021/jz4017188 ↗
39. Research progresses on materials and electrode design towards key challenges of Li-air batteries10.1016/j.ensm.2017.12.020 ↗
40. Review and recent advances in mass transfer in positive electrodes of aprotic Li–O 2 batteries10.1021/acsaem.9b02237 ↗
41. Reversible discharge products in Li–Air batteries
42. Enhanced oxygen reduction and evolution by in situ decoration of hematite nanoparticles on carbon nanotube cathodes for high-capacity nonaqueous lithium–oxygen batteries10.1039/C5TA02442K ↗
43. Defect-enriched iron oxide from industrial waste for lithium oxygen batteries with high economic efficiency and industrial feasibility10.1021/acssuschemeng.2c01313 ↗
44. Chemical instability of dimethyl sulfoxide in lithium–air batteries10.1021/jz5013824 ↗