Distinction and relationship between local and pore-scale saturation in fuel cell gas diffusion layers clarified via high-speed operando tomography
Source abstract
Abstract
In this work, we achieved fast 18s tomographic scans of an operating polymer electrolyte membrane (PEM) fuel cell at high resolution (voxel edge length of 2.44 μm) and achieved commercially relevant current and power densities (up to 2.0 A cm −2 and 0.45 W cm −2 , respectively). We define and quantify pore-scale saturation (for the first time) in fuel cell gas diffusion layers (GDLs) at statistically representative scales. Partial filling of pores was observed, and pores were more saturated closer to the catalyst layer (CL)-GDL interface (43.7% saturated on average) than at the flow field (FF)-GDL interface (27.9% saturated on average). Additionally, we found that pore-scale saturation increased with increasing local saturation in the GDL. The oftentimes default assumption of fully saturated pores in numerical models could lead to significant underestimation of GDL permeability. A GDL with partially filled pores has a 26.4% higher through-plane permeability and 50.3% higher in-plane permeability of air compared to a GDL with fully saturated pores. • 18s tomographic scans of an operando fuel cell at high resolution 2.44 μm/pixel. • Liquid water formation and accumulation in the gas diffusion layers. • Partial filling of pores, with higher saturation closer to the catalyst layer interface. • Pore saturation increased with increasing bulk saturation in the GDL. • Assuming fully saturated pores could lead to underestimations of GDL permeability.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fuel Cells and Related Materials · Advancements in Solid Oxide Fuel Cells · NMR spectroscopy and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Proton exchange membrane fuel cell (PEMFC) operation in high current density (HCD): problem, progress and perspective10.1016/j.enconman.2024.118348 ↗
2. Liquid water transport in gas diffusion layer of polymer electrolyte fuel cells10.1149/1.1646148 ↗
3. Determining local transport properties of gas diffusion layer land-channel regions via pore network modelling10.1016/j.jpowsour.2023.232770 ↗
4. A highly integrated component with tri-part significantly enhances fuel cell power density by reducing mass transfer resistance and excellent humidity tolerance
5. Easily accessible 3D flow fields through 3D-patterned GDL to enhance PEMFC performance via excellent water-gas separation transport10.1039/D5TA02041G ↗
6. Operando X-ray radiography of liquid water distribution in 100 mm polymer electrolyte fuel cell channels10.1016/j.elecom.2024.107772 ↗
7. Synchrotron X-ray radiographic investigations of liquid water transport behavior in a PEMFC with MPL-coated GDLs10.1016/j.jpowsour.2012.11.006 ↗
8. Microporous layer degradation in polymer electrolyte membrane fuel cells
9. Transient liquid water distributions in polymer electrolyte membrane fuel cell gas diffusion layers observed through In-Operando synchrotron X-ray radiography10.1149/2.0991702jes ↗
10. Visualizing liquid water evolution in a PEM fuel cell using synchrotron X-ray radiography10.1149/2.054212jes ↗
11. Feasibility of combining electrochemical impedance spectroscopy and synchrotron X-ray radiography for determining the influence of liquid water on polymer electrolyte membrane fuel cell performance10.1016/j.ijhydene.2015.10.008 ↗
12. X-ray computed tomography of gas diffusion layers of PEM fuel cells: calculation of thermal conductivity10.1016/j.ijhydene.2010.01.085 ↗
13. Influence of threshold variation on determining the properties of a polymer electrolyte fuel cell gas diffusion layer in X-ray nano-tomography10.1016/j.ces.2009.12.019 ↗
14. Imaging of membrane electrode assemblies of proton exchange membrane fuel cells by X-ray computed tomography10.1016/j.jpowsour.2010.09.020 ↗
15. X-ray computed tomography of gas diffusion layers of PEM fuel cells: segmentation of the microporous layer10.1016/j.jpowsour.2013.01.179 ↗
16. Synchrotron X-ray tomography for investigations of water distribution in polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2010.09.042 ↗
17. Operando properties of gas diffusion layers: saturation and liquid permeability10.1149/2.0881702jes ↗
18. Investigation of dynamic water cluster and droplet interactions in polymer electrolyte fuel cells using operando X-ray tomographic microscopy10.1149/1945-7111/ad749f ↗
19. Image-based pore-scale modelling of the effect of wettability on breakthrough capillary pressure in gas diffusion layers10.1016/j.jpowsour.2023.233539 ↗
20. Computational fluid dynamics modelling of proton exchange membrane fuel cells: accuracy and time efficiency10.1016/j.ijhydene.2023.09.004 ↗
21. Pore network modeling of liquid water and oxygen transport through the porosity-graded bilayer gas diffusion layer of polymer electrolyte membrane fuel cells10.1016/j.electacta.2019.03.115 ↗
22. Pore-network modeling of liquid water flow in gas diffusion layers of proton exchange membrane fuel cells10.1016/j.ijhydene.2014.05.017 ↗
23. Liquid water in cathode gas diffusion layers of PEM fuel cells: identification of various pore filling regimes from pore network simulations10.1016/j.ijheatmasstransfer.2018.10.004 ↗
24. Formation of liquid water pathways in PEM fuel cells: a 3-D pore-scale perspective10.1149/1945-7111/ab7a0b ↗
25. Unveiling the role of PTFE surface coverage on controlling gas diffusion layer water content10.1021/acsami.4c04641 ↗
26. Hard X-ray imaging and tomography at the biomedical imaging and therapy beamlines of Canadian light source10.1107/S1600577524005241 ↗
27. Beamlines of the biomedical imaging and therapy facility at the Canadian light source—Part 110.1016/j.nima.2007.08.087 ↗
28. Effects of carbon corrosion on proton exchange membrane fuel cell performance using two durability evaluation methods10.1016/j.renene.2022.04.015 ↗
29. Carbon corrosion mechanism and mitigation strategies in a proton exchange membrane fuel cell (PEMFC): a review10.1016/j.jpowsour.2020.229434 ↗
30. Numerical investigation of water dynamics in a novel proton exchange membrane fuel cell flow channel10.1016/j.jpowsour.2012.07.084 ↗
31. Experimental investigations on liquid water removal from the gas diffusion layer by reactant flow in a PEM fuel cell10.1016/j.apenergy.2009.04.041 ↗
32. Uneven gas diffusion layer intrusion in gas channel arrays of proton exchange membrane fuel cell and its effects on flow distribution10.1016/j.jpowsour.2009.05.019 ↗
33. A study of the effect of compression on the performance of polymer electrolyte fuel cells using electrochemical impedance spectroscopy and dimensional change analysis10.1016/j.ijhydene.2013.04.021 ↗
34. Effect of clamping pressure on ohmic resistance and compression of gas diffusion layers for polymer electrolyte fuel cells10.1016/j.jpowsour.2012.07.021 ↗
35. Tofu: a fast, versatile and user-friendly image processing toolkit for computed tomography10.1107/S160057752200282X ↗
36. Simultaneous phase and amplitude extraction from a single defocused image of a homogeneous object10.1046/j.1365-2818.2002.01010.x ↗
37. B. Nett, Filtered BackProjection (FBP) illustrated guide for radiologic technologists, (n.d.). https://howradiologyworks.com/filtered-backprojection-fbp-illustrated-guide-for-radiologic-technologists/(accessed December 18, 2024).
38. Fiji: an open-source platform for biological-image analysis10.1038/nmeth.2019 ↗
39. Performance analysis of image thresholding: otsu technique10.1016/j.measurement.2017.09.052 ↗
40. A robust 2D Otsu's thresholding method in image segmentation10.1016/j.jvcir.2016.10.013 ↗
41. Characteristic analysis of otsu threshold and its applications10.1016/j.patrec.2011.01.021 ↗
42. On minimum variance thresholding10.1016/j.patrec.2006.04.012 ↗
43. Survey over image thresholding techniques and quantitative performance evaluation10.1117/1.1631315 ↗
44. 2022
45. Image segmentation, registration and characterization in R with SimpleITK10.18637/jss.v086.i08 ↗
46. OpenPNM: a pore network modeling package10.1109/MCSE.2016.49 ↗
47. Versatile and efficient pore network extraction method using marker-based watershed segmentation10.1103/PhysRevE.96.023307 ↗
48. PEM fuel cell relative humidity (RH) and its effect on performance at high temperatures10.1016/j.electacta.2008.02.074 ↗
49. Investigation of water accumulation and discharge behaviors with variation of current density in PEMFC by high-resolution soft X-ray radiography10.1016/j.ijhydene.2011.05.160 ↗
50. Implications of polymer electrolyte fuel cell exposure to synchrotron radiation on gas diffusion layer water distribution10.1016/j.jpowsour.2013.07.025 ↗
51. A quasi three–dimensional model for PEM fuel cell impedance: the effect of local oxygen depletion under the flow field rib10.1088/2053-1591/ad09a6 ↗
52. A numerical study of structural change and anisotropic permeability in compressed carbon cloth polymer electrolyte fuel cell gas diffusion layers10.1002/fuce.201000037 ↗
53. The role of compressive stress on gas diffusion media morphology and fuel cell performance10.1021/acsaem.7b00077 ↗
54. Heterogeneous through-plane distributions of polytetrafluoroethylene in polymer electrolyte membrane fuel cell gas diffusion layers10.1016/j.jpowsour.2011.11.005 ↗
55. Engineering highly efficient root-inspired microporous layer for high-performance fuel cells10.1016/j.cej.2024.154424 ↗
56. Water management studies in PEM fuel cells, part I: fuel cell design and in situ water distributions10.1016/j.ijhydene.2008.12.100 ↗
57. Combined neutron radiography and locally resolved current density measurements of operating PEM fuel cells10.1016/j.jpowsour.2007.08.058 ↗
58. The effects of gas diffusion layers structure on water transportation using X-ray computed tomography based lattice boltzmann method10.1016/j.jpowsour.2017.12.016 ↗
59. Temperature dependent water transport mechanism in gas diffusion layers revealed by subsecond operando X-ray tomographic microscopy10.1016/j.jpowsour.2021.229492 ↗
60. Pore network modelling of condensation in gas diffusion layers of proton exchange membrane fuel cells10.1016/j.ijheatmasstransfer.2016.06.078 ↗
61. Water transport in gas diffusion layer of a polymer electrolyte fuel cell in the presence of a temperature gradient. Phase change effect10.1016/j.ijhydene.2015.04.027 ↗
62. Neutron imaging of generated water inside polymer electrolyte fuel cell using newly-developed gas diffusion layer with gas flow channels during power generation10.1016/j.jpowsour.2022.231251 ↗
63. Similarities and differences between gas diffusion layers used in proton exchange membrane fuel cell and water electrolysis for material and mass transport