journal article·2026-08Open access

Poly(ionic liquid)s as self-sufficient polyelectrolytes for quasi-solid state and membraneless supercapacitor devices

Hazar Guemiza, Daniil R. Nosov, Malak Alaa Eddine, Daniel F. Schmidt, Eric Drockenmuller, Alexander S. Shaplov, Cedric Plesse, Thuan-Nguyen Pham-Truong, Pierre-Henri Aubert

Abstract

We demonstrate the first application of dynamic ion gels (DIGs) from the coacervation of two oppositely charged poly(ionic-liquid)s in the fabrication of quasi-solid-state supercapacitor devices, able to operate at high temperature without liquid leakage. The formation of the DIG enables the spontaneous in situ release of free ionic liquid (IL) avoiding the need to boost the ionic conductivity by the addition of exogeneous IL. Remarkably, the DIG maintains its solid-like behavior at elevated temperatures, enabling safe operation across a wide temperature range (25–80 °C) without leakage. Used as quasi-solid-state electrolyte, binder, separator and ionic-conducting filler for the rGO-based electrodes, various parameters are optimized, including the use of single cationic/anionic poly(ionic-liquid), their association modes and DIG content. Combined with rGO-MWCNTs, DIG made from poly(1-butyl-3-[oxiran-2-ylmethyl]-1-imidazole-3-ium-s-ethylene oxide) bis (trifluoromethyl sulfonyl) imide and poly[(1-butyl-3-methylimidazolium 1-[3-(methacryl oyloxy)propylsulfonyl]-1-(trifluoromethane sulfonyl)imide)-r-(poly(ethyleneglycol) methyl ether methacrylate) yields optimal electrochemical performance of 27.2 F g −1 at 1 mV s −1 (at 25 °C) with device's excellent stability, maintaining 80% of capacitance after 4700 cycles and 60.1 F g −1 (at 80 °C) in open air conditions. Accordingly, the maximum energy/power densities of 17 Wh kg −1 /137 W kg −1 at 25 °C and 31.4 Wh kg −1 /366 W kg −1 at 80 °C are obtained.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies · Dielectric materials and actuators

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Constructing flexible all-solid-state supercapacitors from 3D nanosheets active bricks via 3D manufacturing technology : a perspective review
2. Configuration ‐ dependent stretchable all ‐ solid ‐ state supercapacitors and hybrid supercapacitors10.1002/cey2.320 ↗
3. Flexible all-solid-state supercapacitors with high capacitance, long cycle life, and wide operational potential window: recent progress and future perspectives10.1016/j.est.2022.104223 ↗
4. Recent advancements in gel polymer electrolytes for flexible energy storage applications10.3390/polym16172506 ↗
5. Polymer electrolytes for supercapacitors10.3390/polym16223164 ↗
6. Ionogels, ionic liquid based hybrid materials10.1039/C0CS00059K ↗
7. Ionic liquid gel polymer electrolytes for flexible supercapacitors: challenges and prospects
8. PVDF based ionogels: applications towards electrochemical devices and membrane separation processes10.1016/j.heliyon.2018.e00847 ↗
9. Highly ionic conductive, stretchable, and tough ionogel for flexible solid-state supercapacitor
10. In situ synthesized PEO/NBR composite ionogels for high-performance all-solid-state supercapacitors10.1039/C9CC03401C ↗
11. Poly(ionic liquid)s: synthesis, properties, and application
12. Fundamental limitations of ionic conductivity in polymerized ionic liquids10.1021/acs.macromol.8b01221 ↗
13. Polymeric ionic liquids: comparison of polycations and polyanions10.1021/ma2014518 ↗
14. Protic Poly(Ionic Liquid)/Ionic liquid ionogel electrolyte sharing the same ionic species for supercapacitors10.1021/acs.iecr.3c02984 ↗
15. A poly(ionic liquid) gel electrolyte for efficient all solid electrochemical double-layer capacitor10.1038/s41598-018-29028-y ↗
16. Gel-Polymer electrolytes based on Poly(Ionic Liquid)/Ionic Liquid networks10.1021/acsapm.0c01042 ↗
17. A highly adhesive PIL/IL gel polymer electrolyte for use in flexible solid state supercapacitors10.1016/j.electacta.2019.01.029 ↗
18. PIL/IL gel polymer electrolytes: the influence of the IL ions on the properties of solid-state supercapacitors10.1016/j.eurpolymj.2018.09.024 ↗
19. Frontiers in poly(ionic liquid)s: syntheses and applications10.1039/C6CS00620E ↗
20. A novel bilayer heterogeneous poly(ionic liquid) electrolyte for high-performance flexible supercapacitors with ultraslow self-discharge10.1039/D3MH00198A ↗
21. Dynamic ion gels from the complex coacervation of oppositely charged Poly(ionic liquid)s10.1021/acsmacrolett.4c00253 ↗
22. Enhanced dispersion of graphene sheets in various liquid solvents supported by poly (ionic liquid) via non-covalent interaction10.1016/j.molliq.2024.126428 ↗
23. Ionic liquid functionalized fluorinated graphene toward excellent anti-wear filler into epoxy coating10.1016/j.carbon.2025.120017 ↗
24. Optimizing graphene dispersion via polymer grafting10.1021/acs.macromol.4c02249 ↗
25. Using an ionic liquid to reduce the electrical percolation threshold in biobased thermoplastic Polyurethane/Graphene nanocomposites10.3390/polym11030435 ↗
26. Materials science: a unique platform for materials design10.1126/science.1159652 ↗
27. Efficient storage mechanisms for building better supercapacitors10.1038/nenergy.2016.70 ↗
28. Thermal-responsive electrolytes for reversible self-protection of electrochemical storage devices at excessive temperature10.1007/s11581-022-04714-0 ↗
29. A flexible supercapacitor based on deep eutectic Solvent/[EMIM][TFSI] ionogel with high energy density and wide temperature range10.1021/acsaelm.3c01738 ↗