Influence of aqueously synthesized polyacrylic acid binder content on the processing and cycling of Si–Gr anodes
Source abstract
Abstract
Polyacrylic acid (PAA) is an emerging binder for silicon–graphite (Si–Gr) composite anodes due to its strong affinity for the native SiO x layer that covers Si particles and its ability to act as an artificial solid–electrolyte interphase (SEI). Here, PAA with a high molecular weight (M w = 845 kg mol −1 ) is synthesized using a green, aqueous route. The effect of varying PAA content (from ⁓3 to 15 wt%) on electrode processing, physical properties, and cycling stability is systematically investigated. Increasing PAA concentration improves slurry stability and dispersion, widening the electrode processability window. X-ray photoelectron spectroscopy (XPS) confirms that PAA preferentially localizes on the silicon surface, with evidence of agglomeration at higher concentrations. An optimal PAA content of 10.6 wt% delivers the highest reversible specific capacity and good cycling stability (1270 mAh g electrode −1 at the 50th cycle in half cell and 860 mAh g electrode −1 in full cell). Lower PAA content results in deficient binder networks and increased irreversible capacity, while excessive binder content leads to binder agglomeration and increased resistivity. Post-mortem solid-state NMR analysis further supports the role of PAA as an artificial SEI, mitigating uncontrolled electrolyte decomposition and lithium loss. • Aqueous PAA synthesis method yields effective binder material for Si-Gr anodes. • Increasing binder content improves slurry rheology and processability. • PAA is preferentially adsorbed on the silicon surface. • Binder coverage ratio is optimized for electrochemical performance. • Post-mortem NMR analysis confirms PAA binder serves as an artificial SEI.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Anodic Oxide Films and Nanostructures · Molten salt chemistry and electrochemical processes · Advancements in Battery Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Application and development of silicon anode binders for lithium-ion batteries10.3390/ma16124266 ↗
2. Nanosilicon anodes for high performance rechargeable batteries10.1016/j.pmatsci.2017.07.003 ↗
3. Solutions for the problems of silicon–carbon anode materials for lithium-ion batteries10.1098/rsos.172370 ↗
4. Role of polyacrylic acid (PAA) binder on the solid electrolyte interphase in silicon anodes10.1021/acs.chemmater.8b05020 ↗
5. Confronting the challenges of next‐generation silicon anode‐based lithium‐ion batteries: role of designer electrolyte additives and polymeric binders10.1002/cssc.201900209 ↗
6. Silicon-based electrodes formulation in buffered solution for enhanced electrode-electrolyte interfaces10.1016/j.jpowsour.2021.229465 ↗
7. Stable silicon anode for lithium-ion batteries through covalent bond formation with a binder via esterification10.1021/acsami.9b03866 ↗
8. Poly(Acrylic Acid)‐Based polymer binders for high‐performance lithium‐ion batteries: from structure to properties10.1002/smll.202407297 ↗
9. Towards water based ultra-thick Li ion battery electrodes – a binder approach10.1016/j.jpowsour.2019.03.020 ↗
10. A comparative study of polyacrylic acid (PAA) and carboxymethyl cellulose (CMC) binders for Si-based electrodes10.1016/j.electacta.2017.11.082 ↗
11. Influence of the polyacrylic acid binder neutralization degree on the initial electrochemical behavior of a silicon/graphite electrode10.1021/acsami.1c06683 ↗
12. Precisely prelithiated polyacrylic acid binder improving electrochemical performance of micron‐sized silicon anodes for lithium‐ion batteries10.1002/celc.202400326 ↗
13. Electrochemical lithiation performance and characterization of silicon–graphite composites with lithium, sodium, potassium, and ammonium polyacrylate binders10.1039/C4CP04939J ↗
14. Understanding of pre-lithiation of poly(acrylic acid) binder: striking the balances between the cycling performance and slurry stability for silicon-graphite composite electrodes in Li-ion batteries10.1016/j.jpowsour.2019.01.068 ↗
15. Anodes for Li-ion batteries prepared from microcrystalline silicon and enabled by binder's chemistry and pseudo-self-healing10.1038/s41598-020-70001-5 ↗
16. The effects of lithium ions and pH on the function of polyacrylic acid binder for silicon anodes10.1149/1945-7111/aceab1 ↗
17. Extrusion‐based processing of cathodes: influence of solid content on suspension and electrode properties10.1002/ente.201801169 ↗
18. Critical binder-to-powders coverage ratio for faster Graphite/SiO x electrode formulation optimization
19. Kinetic study on acrylic acid polymerisations in isopropanol10.3390/app11209719 ↗
20. Precipitation polymerization of acrylic acid in toluene. II: mechanism and kinetic modeling10.1016/S0032-3861(98)00837-4 ↗
21. Synthesis and characterization of poly(acrylic acid) produced by RAFT polymerization. Application as a very efficient dispersant of CaCO3 , kaolin, and TiO210.1021/ma0256744 ↗
22. Solution polymerization of acrylic acid initiated by Redox couple Na-PS/Na-MBS: kinetic model and transition to continuous process10.3390/pr8070850 ↗
23. Ristić · 2016 · 685
24. Exploration of high and low molecular weight polyacrylic acids and sodium polyacrylates as potential binder system for use in silicon graphite anodes10.1021/acsaem.4c02672 ↗
25. Influence of the molecular weight of poly-acrylic acid binder on performance of Si-Alloy/Graphite composite anodes for lithium-ion batteries10.1002/ente.201800302 ↗
26. The existence of optimal molecular weight for poly(acrylic acid) binders in silicon/graphite composite anode for lithium-ion batteries10.1016/j.jpowsour.2017.12.068 ↗
27. A low-cost and high performance ball-milled Si-based negative electrode for high-energy Li-ion batteries10.1039/c3ee41318g ↗
28. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
29. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
30. Nanoindentation and nanoscratching of hard carbon coatings for magnetic disks10.1557/PROC-383-447 ↗
31. Trainable weka segmentation: a machine learning tool for microscopy pixel classification10.1093/bioinformatics/btx180 ↗
32. Modelling one- and two-dimensional solid-state NMR spectra10.1002/mrc.984 ↗
33. Effects of sodium carboxymethyl cellulose and poly (acrylic acid) on the agglomeration behavior of aqueous silicon suspensions10.1016/j.colsurfa.2023.131801 ↗
34. Design of aqueous processed thick LiFePO4 composite electrodes for high-energy lithium battery10.1149/1.3046129 ↗
35. Rheology and structure of lithium‐ion battery electrode slurries10.1002/ente.202200545 ↗
36. Deconvoluting slurry rheology from binder performance in Si-Based anodes10.1149/1945-7111/ad136f ↗
37. A novel slurry concept for the fabrication of lithium-ion battery electrodes with beneficial properties10.1016/j.jpowsour.2014.04.115 ↗
38. Processing of water-based LiNi1/3Mn1/3Co1/3O2 pastes for manufacturing lithium ion battery cathodes10.1007/s12034-014-0733-7 ↗
39. Manufacturing of industry-relevant silicon negative composite electrodes for lithium ion-cells10.1016/j.jpowsour.2014.03.119 ↗
40. Cycling performance of SiOx-Si-C composite anode with different blend ratios of PAA-CMC as binder for Lithium sulfur batteries10.1007/s10965-024-04005-4 ↗
41. CMC-Citric acid Cu(II) cross-linked binder approach to improve the electrochemical performance of Si-based electrodes10.1016/j.electacta.2019.03.026 ↗
42. Lithium polyacrylate polymer coating enhances the performance of graphite/silicon/carbon composite anodes10.1016/j.electacta.2020.137387 ↗
43. Functional interface of polymer modified graphite anode10.1016/j.jpowsour.2008.09.092 ↗
44. Effect of PVdF binder content on dry-sprayed graphite electrodes for lithium-ion batteries for electric vehicle applications