Effects of pulsating charging to obtain dense lithium metal anodes
Source abstract
Abstract
Lithium metal anodes offer high theoretical energy density but are limited by unstable deposition morphologies and low Coulombic efficiency. In this work, pulsed current deposition is systematically investigated in a commercial carbonate electrolyte. Electrochemical Impedance Spectroscopy (EIS) is used to probe interfacial relaxation times associated with ion transport and charge transfer across the Solid Electrolyte Interphase (SEI), thereby defining a physics-based frequency range between 50 Hz and 1000 Hz for pulsed current testing. Through comparative investigations, we discovered that, if the deposits are allowed to expand freely into an electrolyte reservoir, intermediate pulse frequencies produce much more compact and coalesced surface morphologies with reduced polarization compared to constant-current deposition, whereas both lower and higher frequencies lead to more fragmented deposition. When the substrate for deposition is pressed against the separator without an electrolyte reservoir, pulsed current does not significantly change the compactness or average Coulombic efficiency, but reduces cell-to-cell variability during cycling, depending on pulse frequency.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Molten salt chemistry and electrochemical processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Lithium metal anodes: toward an improved understanding of coupled morphological, electrochemical, and mechanical behavior10.1021/acsenergylett.6b00650 ↗
2. Erecting stable lithium metal batteries: comprehensive review and future prospects10.1002/adfm.202504990 ↗
3. Confronting the challenges in lithium anodes for lithium metal batteries10.1002/advs.202101111 ↗
4. Toward high‐energy‐density lithium metal batteries: opportunities and challenges for solid organic electrolytes10.1002/adma.201905219 ↗
5. Advanced electrolytes enabling safe and stable rechargeable li‐metal batteries: progress and prospects10.1002/adfm.202105253 ↗
6. Quantifying the dependence of dead lithium losses on the cycling period in lithium metal batteries10.1039/C4CP03590A ↗
7. Understanding and suppression strategies toward stable Li metal anode for safe lithium batteries10.1016/j.ensm.2019.09.020 ↗
8. Rationally design lithiophilic surfaces toward high−energy lithium metal battery10.1016/j.ensm.2021.01.012 ↗
9. Lithium metal batteries for high energy density: fundamental electrochemistry and challenges10.1016/j.jechem.2020.11.034 ↗
10. Live scanning electron microscope observations of dendritic growth in lithium/polymer cells10.1149/1.1519970 ↗
11. A sealed optical cell for the study of lithium-electrode|electrolyte interfaces10.1016/S0378-7753(02)00603-1 ↗
12. Solid electrolyte interphases in lithium metal batteries10.1016/j.joule.2023.08.007 ↗
13. SEI formation and lithium-ion electrodeposition dynamics in lithium metal batteries via first-principles kinetic monte carlo modeling10.1021/acsenergylett.4c02019 ↗
14. Continuum-level modeling of Li-Ion battery SEI by upscaling atomistically informed reaction mechanisms10.1016/j.electacta.2023.143121 ↗
15. Stable artificial solid electrolyte interphases for lithium batteries10.1021/acs.chemmater.6b03687 ↗
16. LiF-Rich interfacial protective layer enables air-stable lithium metal anodes for dendrite-free lithium metal batteries10.1021/acsami.3c06007 ↗
17. Design of a LiF‐Rich solid electrolyte interphase layer through highly concentrated LiFSI–THF electrolyte for stable lithium metal batteries10.1002/smll.202103375 ↗
18. Tackling realistic Li+ flux for high-energy lithium metal batteries10.1038/s41467-022-33151-w ↗
19. Customized design of LiF‐Rich SEI layer on lithium metal anode for high flame retardant electrolyte10.1002/cey2.70077 ↗
20. Li-Growth and SEI engineering for anode-free Li-Metal rechargeable batteries: a review of Current advances10.1016/j.ensm.2023.02.036 ↗
21. Multifunctional electrolyte additive for high power lithium metal batteries at ultra-low temperatures10.1038/s41467-025-58627-3 ↗
22. Additive-induced interfacial chemistry: the key to next-generation lithium metal batteries
23. A fiber‐based 3D lithium host for lean electrolyte lithium metal batteries10.1002/advs.202104829 ↗
24. High rate and stable cycling of lithium metal anode10.1038/ncomms7362 ↗
25. Countersolvent electrolytes for lithium‐metal batteries10.1002/aenm.201903568 ↗
26. Review—Localized high-concentration electrolytes for lithium batteries10.1149/1945-7111/abd60e ↗
27. The faceted lithium growths10.1016/j.joule.2023.09.014 ↗
28. Ultrafast deposition of faceted Lithium polyhedra by outpacing SEI formation10.1038/s41586-023-06235-w ↗
29. Transition of lithium growth mechanisms in liquid electrolytes10.1039/C6EE01674J ↗
30. Concentration polarization and metal dendrite initiation in isolated electrolyte microchannels10.1039/D0EE01874K ↗
31. Growing single-crystalline seeds on lithiophobic substrates to enable fast-charging lithium-metal batteries
32. Horizontal lithium growth driven by surface dynamics on single crystal Cu(111) foil10.1039/D4EE01766H ↗
33. Defect-mediated faceted lithium nucleation on carbon composite substrates10.1021/acsnano.4c03498 ↗
34. Unravelling the mechanism of pulse current charging for enhancing the stability of commercial LiNi 0.5 Mn 0.3 Co 0.2 O 2/Graphite lithium‐ion batteries10.1002/aenm.202400190 ↗
35. Performance improvement of lithium-ion battery by pulse current10.1016/j.jechem.2019.11.007 ↗
36. Optimal pulse-modulated lithium-ion battery charging: algorithms and simulation10.1016/j.est.2017.11.007 ↗
37. Forward and reverse differential-pulse effects applied in the Formation of a solid electrolyte interface to enhance the performance of lithium batteries10.1016/j.electacta.2014.10.004 ↗
38. A new charging mode of Li-Ion batteries with LiFePO4/C composites under low temperature10.1007/s10973-010-1038-8 ↗
39. Suppression of dendrite Formation via pulse charging in rechargeable lithium metal batteries10.1021/jp309321w ↗
40. Dynamics of lithium dendrite growth and inhibition: pulse charging experiments and monte carlo calculations10.1021/jz500207a ↗
41. Effects of pulse plating on lithium electrodeposition, morphology and cycling efficiency10.1016/j.jpowsour.2014.09.026 ↗
42. Understanding the molecular mechanism of pulse current charging for stable lithium-metal batteries10.1126/sciadv.1701246 ↗
43. Exceeding 6500 cycles for LiFePO 4/Li metal batteries through understanding pulsed charging protocols10.1039/C8TA00962G ↗
44. Modeling the effects of pulse plating on dendrite growth in lithium metal batteries
45. Quantitative analysis of the inhibition effect of rising temperature and pulse charging on lithium dendrite growth10.1016/j.est.2022.104137 ↗
46. Analysis of the lithium electrodeposition behavior in the charge process of lithium metal battery associated with overpotential10.1016/j.jpowsour.2022.232536 ↗
47. Pulsed current boosts the stability of the lithium metal anode and the improvement of lithium–oxygen battery performance10.1021/acsami.2c15347 ↗
48. Energy-dense anode-free rechargeable lithium metal batteries based on thick cathodes and pulse charging strategies10.1039/D3SE00664F ↗
49. Real-Time control of dendritic propagation in rechargeable batteries using adaptive pulse relaxation10.1063/5.0042226 ↗
50. Characteristic analysis on the effect of pulse voltage and current density on lithium-ion battery dendrite growth at low temperatures10.1016/j.est.2025.117552 ↗
51. Bipolar pulse current charge method for inhibiting the formation of lithium dendrite10.3866/PKU.WHXB20060924 ↗
52. Effect of pulse-current-based protocols on the lithium dendrite Formation and evolution in all-solid-state batteries10.1038/s41467-023-37476-y ↗
53. Fast formation of anode-free Li–Metal batteries by pulsed current10.1039/D4CP00775A ↗
54. Interactions between lithium growths and nanoporous ceramic separators10.1016/j.joule.2018.08.018 ↗
55. Nucleation processes at interfaces with both substrate and electrolyte control lithium growth10.1038/s41557-025-01911-y ↗
56. Stabilizing electrodeposition in elastic solid electrolytes containing immobilized anions10.1126/sciadv.1600320 ↗
57. Stability analysis of electrodeposition across a structured electrolyte with immobilized anions10.1149/2.085405jes ↗