Single-step fabrication of a three-layered full solid oxide fuel cells via the cold sintering process
Source abstract
Abstract
Nanocomposite electrolytes based on Sm-doped ceria and sodium carbonates emerge as promising candidates for intermediate-temperature solid oxide fuel cells (IT-SOFCs) due to their exceptional ionic conductivity. However, conventional high-temperature sintering presents challenges regarding cost, phase stability, and insufficient densification. This study presents a pioneering approach for the fabrication of a full, three-layered SOFC (anode/electrolyte/cathode) in a single step using the cold sintering process at a remarkably low temperature of 200°C. Two different preparation methods for the electrolyte, co-precipitation and direct solid-state mixing, undergo investigation. While both methods yield comparable conductivity values around 140 mS.cm⁻¹ at 600°C in H₂ atmosphere, the direct mixing route offers superior densification (>97%) and serves as the chosen method for full-cell fabrication. This work reports the electrochemical performance of a full SOFC fabricated in a single step via cold sintering for the first time. Electrochemical impedance spectroscopy reveals a low ohmic resistance of 0.15 Ω.cm², confirming the efficacy of this process in preserving the nanostructure and facilitating superionic conduction. A peak power density of 534 mW.cm⁻² validates this method as an energy-efficient, scalable solution for IT-SOFC production.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electrophoretic Deposition in Materials Science · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Functional ceria–salt-composite materials for advanced ITSOFC applications10.1016/S0378-7753(02)00592-X ↗
2. Nanomaterials and technologies for low temperature solid oxide fuel cells: recent advances, challenges and opportunities10.1016/j.nanoen.2017.12.044 ↗
3. Development of novel low-temperature SOFCs with co-ionic conducting SDC-Carbonate composite electrolytes10.1016/j.elecom.2007.07.036 ↗
4. Gadolinia-doped ceria mixed with alkali carbonates for SOFC applications: I. A thermal, structural and morphological insight10.1016/j.jpowsour.2011.02.004 ↗
5. Studies on dual phase ceria-based composites in electrochemistry10.1016/S1452-3981(23)17167-7 ↗
6. Enhancement of conductivity in ceria-carbonate nanocomposites for LTSOFCs10.4028/www.scientific.net/JNanoR.6.197 ↗
7. Novel core-shell SDC/amorphous Na2CO3 nanocomposite electrolyte for low-temperature SOFCs10.1016/j.elecom.2008.08.023 ↗
8. Ceria-carbonate composite for low temperature solid oxide fuel cell: sintering aid and composite effect10.1016/j.ijhydene.2014.04.004 ↗
9. Conductivity of alkali carbonates, carbonate-based composite electrolytes and IT-SOFC10.1149/2.015402jss ↗
10. Codoped ceria Ce0.8M0.1Gd0.1O2-δ (M = Sm3+, Sr2+, Ca2+) and co-doped ceria-Na2CO3 nanocomposite electrolytes for solid oxide fuel cells10.1021/acsanm.9b01282 ↗
11. Cold sintering: a paradigm shift for processing and integration of ceramics10.1002/anie.201605443 ↗
12. Cold sintering process: a novel technique for low-temperature ceramic processing of ferroelectrics10.1111/jace.14554 ↗
13. Cold sintering process of composites: bridging the processing temperature gap of ceramic and polymer materials10.1002/adfm.201602489 ↗
14. The future of the cold sintering process: challenges, opportunities, and innovations
15. Densification of ceramics and ceramic-based composites using ultralow temperature sintering (cold sintering): a comprehensive review10.1111/ijac.14996 ↗
16. Sintering science meets sustainability: a review of cold sintering process in solid-state electrolytes10.1080/10408436.2025.2586531 ↗
17. Densification and performance optimization of NaSICON solid electrolytes via a low-temperature cold sintering process with sodium ionic salt doping10.1039/D5TA00698H ↗
18. Cold sintering of ceria-based solid electrolyte with the assistance of a core-shell structure10.1016/j.scriptamat.2022.114951 ↗
19. Densification of a solid-state NASICON sodium-ion electrolyte below 400 °C by cold sintering with a fused hydroxide solvent10.1021/acsaem.0c00047 ↗
20. One step densification of SDC-Na2CO3 nano-composite electrolytes for SOFC applications by cold sintering process10.1111/jace.19294 ↗
21. Carbonate content and solvent effects on microstructural and electrical properties of cold sintered SDC-Na2CO3 nanocomposite electrolytes10.1016/j.ceramint.2025.10.294 ↗
22. Theoretical approach on ceria-based two-phase electrolytes for low temperature (300–600 °C) solid oxide fuel cells10.1016/j.elecom.2007.11.037 ↗
23. A high performance composite ionic conducting electrolyte for intermediate temperature fuel cell and evidence for ternary ionic conduction10.1016/j.jpowsour.2008.11.068 ↗
24. Innovative low temperature SOFCs and advanced materials10.1016/S0378-7753(03)00060-0 ↗
25. Cold sintering of anode-supported 8YSZ/NiO-8YSZ bilayers for solid oxide fuel cells10.1021/acsaem.1c02483 ↗
26. Cold sintering and co-firing of a multilayer device with thermoelectric materials10.1111/jace.14852 ↗
27. Cold-sintered C0G multilayer ceramic capacitors10.1002/aelm.201900025 ↗
28. A stable intermediate temperature fuel cell based on doped-ceria-carbonate composite electrolyte and perovskite cathode10.1016/j.elecom.2011.03.015 ↗
29. Intermediate temperature fuel cell with a doped ceria-carbonate composite electrolyte10.1016/j.jpowsour.2009.11.104 ↗
30. Composite electrolytes for fuel cells: Long-term stability under variable atmosphere10.1016/j.ijhydene.2013.12.125 ↗
31. Durability study of an intermediate temperature fuel cell based on an oxide-carbonate composite electrolyte10.1016/j.ijhydene.2010.04.026 ↗
32. Carbonate-based lanthanum strontium cobalt ferrite (lscf)-samarium-doped ceria (SDC) composite cathode for low-temperature solid oxide fuel cells
33. High performance low-temperature solid oxide fuel cells based on nanostructured ceria-based electrolyte10.3390/nano11092231 ↗
34. Functional ceria-based nanocomposites for advanced low-temperature (300–600 °C) solid oxide fuel cell: a comprehensive review
35. Low temperature ceramic fuel cells using all nano composite materials10.1016/j.nanoen.2012.04.004 ↗
36. Role of carbonate amount and synthesis procedure in the conductivity of SDC-Na2CO3 composite electrolytes for solid oxide cells applications10.1016/j.ijhydene.2024.01.215 ↗
37. Preparation and characterization of Sm0.2Ce0.8O1.9/Na2CO3 nanocomposite electrolyte for low-temperature solid oxide fuel cells10.1016/j.ijhydene.2010.12.061 ↗
38. High performance of SDC and GDC core shell type composite electrolytes using methane as a fuel for low temperature SOFC10.1063/1.4941676 ↗
39. Investigation of Sm0.2Ce0.8O1.9/Na2CO3 nanocomposite electrolytes: preparation, interfacial microstructures, and ionic conductivities10.1021/am403198x ↗
40. Study on nanocomposites based on carbonate@ceria10.1166/jnn.2010.1857 ↗
41. Surface and interfacial conduction using gadolinium-doped ceria electrolyte for advanced low temperature 400–500 °C fuel cell
42. Strongly coupled Sm0.2Ce0.8O2–Na2CO3 nanocomposite for low-temperature solid oxide fuel cells: One-step synthesis and super interfacial proton conduction10.1016/j.jpowsour.2018.03.035 ↗
43. Electrochemical study on co-doped ceria-carbonate composite electrolyte10.1016/j.jpowsour.2011.10.124 ↗
44. Development of novel low-temperature SOFCs with co-ionic conducting SDC-carbonate composite electrolytes10.1016/j.elecom.2007.07.036 ↗
45. Parasitic effects in impedance spectra of PEM water electrolysis cells10.1002/ente.202300375 ↗
46. Effects of water on oxygen surface exchange and degradation of mixed conductors10.1016/j.jpowsour.2011.04.032 ↗
47. Water-induced decoupling of tracer and electrochemical oxygen exchange kinetics10.1021/acs.jpclett.6b00778 ↗
48. Factors governing oxygen reduction in SOFC cathodes10.1021/cr020724o ↗
49. DRT analysis and transmission line modeling of ceria-based electrodes for solid oxide cells10.1016/j.jpowsour.2023.233706 ↗
50. Ceria based nano-composite electrodes for intermediate temperature solid oxide fuel cells (IT-SOFCs)
51. Processing temperature tuned interfacial microstructure and conductivities of SDC/Na2CO3
52. Solid oxide-molten carbonate nanocomposite fuel cells: particle size effect10.1016/j.jpowsour.2014.05.010 ↗
53. Electrochemical study on co-doped ceria-carbonate composite electrolyte10.1016/j.jpowsour.2011.10.124 ↗
54. Sintering-driven optimization of multi-ionic SDC-Na2CO3 nanocomposite electrolytes for low-temperature solid oxide cell applications
55. Sintering science meets sustainability: a review of cold sintering process in solid-state electrolytes10.1080/10408436.2025.2586531 ↗
56. Scaling up the cold sintering process of ceramics10.1016/j.jeurceramsoc.2023.04.061 ↗
57. Durability improvement of large-area anode supported solid oxide fuel cell fabricated by 4-layer sequential co-lamination and co-firing process10.1016/j.jpowsour.2023.233160 ↗
58. Achieving long-term stability in large-area solid oxide fuel cell through microstructural engineering of La0.6Sr0.4CoO3 cathode10.1016/j.ceramint.2024.12.500 ↗
59. Beyond traditional fuel cells: development and a comprehensive analysis of mechanically robust metal mesh-supported solid oxide fuel cell10.1016/j.ceramint.2024.07.414 ↗
60. Electro-chemo-mechanical analysis of a solid oxide cell based on doped ceria10.1016/j.jpowsour.2022.231505 ↗