journal article·2026-08Open access

Impact of laboratory-scale pouch cell design on electrochemical characterization of battery materials

Maider Elosua Alza, Yvan Reynier, Eric Woillez, Elias Aboudrar, Jade Rebaudo, Agathe Martin, Eric Mayousse, Irene Canale, Taos Guyot, Luca Maccarrone, Domenico Frattini, Luis Santos, Emmanuelle Lancelle-Beltran

Abstract

Batteries are widely studied, yet laboratory-scale results are difficult to extrapolate due to prototype-specific characteristics. In this paper, we present a comparative study of three home-made pouch cell formats to unravel the influence of design characteristics on common electrochemical tests. Cells of each format were tested through the formation cycle, discharge-rate capability, cycling and calendar aging tests. We show that electrochemical behavior depends on the amount and placement of extra negative surfaces in the cell. Face-to-face extra surfaces contribute from the beginning of the cell testing due to their easy accessibility, while external extra surfaces, if present, gain relevance over time due to slower diffusion toward the less accessible faces. Accordingly, formation cycles and brief discharge rate tests were mainly influenced by the face-to-face extra surfaces. In contrast, the long-term cycling and calendar tests showed both the face-to-face extra surface influence at early testing times, and the progressive contribution of the external surfaces, which became visible later in testing. Constant voltage steps after calendar storage and cycling pauses at the discharged state confirm these findings. In our study, bi-layer pouch cells with limited extra negative surfaces and convenient cell characteristics were the most representative cells for laboratory long-term testing.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (72)

Show source-provided references
1. Fuel consumption and CO2 emissions from passenger cars in Europe – laboratory versus real-world emissions10.1016/j.pecs.2016.12.004 ↗
2. Assessing the European electric-mobility transition: emissions from electric vehicle manufacturing and use in relation to the EU greenhouse gas emission targets10.1021/acs.est.2c06304 ↗
3. Recent progress and prospects on sodium-ion battery and all-solid-state sodium battery: a promising choice of future batteries for energy storage10.1021/acs.energyfuels.4c00980 ↗
4. Challenges and opportunities of practical sulfide-based all-solid-state batteries10.1016/j.etran.2023.100272 ↗
5. The lithium-ion battery: state of the art and future perspectives10.1016/j.rser.2018.03.002 ↗
6. Recent progress and future perspective on practical silicon anode-based lithium ion batteries10.1016/j.ensm.2022.01.042 ↗
7. Lithium-ion batteries on board: a review on their integration for enabling the energy transition in shipping industry10.3390/en17051019 ↗
8. Lithium-ion battery fundamentals and exploration of cathode materials: a review
9. Lithium-ion batteries—the crux of electric vehicles with opportunities and challenges10.3390/cleantechnol4040056 ↗
10. The future of lithium-ion batteries: exploring expert conceptions, market trends, and price scenarios10.1016/j.erss.2022.102850 ↗
11. Functional safety BMS design methodology for automotive lithium-based batteries10.3390/en14216942 ↗
12. Strategies for rational design of high-power lithium-ion batteries10.1002/eem2.12088 ↗
13. Lamb, ‘Lifetime Expectancy of Lithium-Ion Batteries’
14. A facile synthesis of graphite-coated amorphous SiO2 from biosources as anode material for libs
15. Design and optimization of lithium-ion battery as an efficient energy storage device for electric vehicles: a comprehensive review10.1016/j.est.2023.108033 ↗
16. From materials to cell: State-of-the-Art and prospective technologies for lithium-ion battery electrode processing10.1021/acs.chemrev.1c00565 ↗
17. Formulation and manufacturing optimization of lithium-ion graphite-based electrodes via machine learning
18. Porous electrode modeling and its applications to Li-Ion batteries10.1002/aenm.202201506 ↗
19. Overview on theoretical simulations of lithium-ion batteries and their application to battery separators10.1002/aenm.202203874 ↗
20. A direct comparison of pilot-scale Li-Ion cells in the formats PHEV1, pouch, and 2170010.1149/1945-7111/ac208c ↗
21. A numerical study of the effects of cell formats on the cycle life of lithium ion batteries10.1149/2.0261910jes ↗
22. An easy-to-parameterise physics-informed battery model and its application towards lithium-ion battery cell design, diagnosis, and degradation10.1016/j.jpowsour.2018.02.065 ↗
23. Comparatively assessing different shapes of lithium-ion battery cells10.1016/j.promfg.2017.02.013 ↗
24. Analyzing bending stresses on lithium-ion battery cathodes induced by the assembly process10.1002/ente.201600131 ↗
25. Design, properties, and manufacturing of cylindrical Li-Ion battery cells—A generic overview10.3390/batteries9060309 ↗
26. Trends in automotive battery cell design: a statistical analysis of empirical data10.3390/batteries9050261 ↗
27. 18650 vs. 21700 Li-ion cells – a direct comparison of electrochemical, thermal, and geometrical properties10.1016/j.jpowsour.2020.228614 ↗
28. Lithium-ion cells in automotive applications: tesla 4680 cylindrical cell teardown and characterization10.1149/1945-7111/ad14d0 ↗
29. Contrasting a BYD blade prismatic cell and Tesla 4680 cylindrical cell with a teardown analysis of design and performance
30. Light-weighting of battery casing for lithium-ion device energy density improvement10.1016/j.est.2023.107852 ↗
31. A comparative study of different battery geometries used in electric vehicles10.21712/lajer.2023.v10.n2.p94-114 ↗
32. From cell to pack: empirical analysis of the correlations between cell properties and battery pack characteristics of electric vehicles
33. Potential and limitations of research battery cell types for electrochemical data acquisition10.1002/batt.202300080 ↗
34. A guide to full coin cell making for academic researchers10.1149/2.1171902jes ↗
35. A guide to making highly reproducible Li-Ion single-layer pouch cells for academic researchers10.1149/1945-7111/aceffc ↗
36. Effects of external pressure on the performance and ageing of single-layer lithium-ion pouch cells10.1016/j.jpowsour.2018.03.020 ↗
37. A comparison of lithium-ion cell performance across three different cell formats10.3390/batteries7020038 ↗
38. Influence of cell design on temperatures and temperature gradients in lithium-ion cells: an in operando study10.1149/2.0561506jes ↗
39. Power capability and cyclic aging of commercial, high power lithium ion battery cells with respect to different cell designs10.1016/j.jpowsour.2019.03.075 ↗
40. The influence of the anode overhang effect on the capacity of lithium-ion cells – a 0D-modeling approach10.1016/j.est.2020.101344 ↗
41. Irreversible calendar aging and quantification of the reversible capacity loss caused by anode overhang10.1016/j.est.2018.04.029 ↗
42. Lithium plating at the cell edge induced by anode overhang during cycling in lithium-ion batteries: part I. Modeling and mechanism10.1149/1945-7111/ad4a12 ↗
43. Influence of liquid electrolyte salt nature and concentration on tortuosity measurement of battery electrode10.1016/j.electacta.2024.145567 ↗
44. Two-dimensional modeling of lithium deposition during cell charging10.1149/1.3095513 ↗
45. From small batteries to big claims10.1038/s41565-025-01906-3 ↗
46. Calendar aging of a graphite/LiFePO4 cell10.1016/j.jpowsour.2012.02.068 ↗
47. Cycle and calendar life study of a graphite|LiNi1/3Mn1/3Co1/3O2 Li-ion high energy system. Part A: full cell characterization10.1016/j.jpowsour.2013.03.045 ↗
48. Calendar aging of lithium-ion batteries10.1149/2.0411609jes ↗
49. Analysis and modeling of calendar aging of a commercial LiFePO4/graphite cell10.1016/j.est.2018.01.019 ↗
50. Review—reference electrodes in Li-Ion and next generation batteries: correct potential assessment, applications and practices10.1149/1945-7111/ac429b ↗
51. High charge and discharge rate limitations in ordered macroporous Li-ion battery materials
52. Understanding thickness and porosity effects on the electrochemical performance of LiNi⁠0.6Co⁠0.2Mn⁠0.2O⁠2-based cathodes for high energy Li-ion batteries
53. Understanding the limits of Li-NMC811 half-cells
54. Mercer · 2020
55. Thick electrodes for Li-ion batteries: a model based analysis10.1016/j.jpowsour.2016.09.143 ↗
56. Fast charging of lithium-ion batteries: a review of materials aspects10.1002/aenm.202101126 ↗
57. Constitutive behavior and mechanical failure of internal configuration in prismatic lithium-ion batteries under mechanical loading10.3390/en14051219 ↗
58. Impacts of electrode shape on lithiation performance: the edge effect on lithium intercalation10.1016/j.est.2021.103568 ↗
59. Impact of reduced electrolyte volume on cyclic ageing in lithium-ion batteries with graphite and SiOx-Graphite anodes10.1149/1945-7111/adef23 ↗
60. Size effect on the thermal and mechanical performance of cylindrical lithium-ion batteries10.1016/j.apenergy.2024.124056 ↗
61. Thermal characterization of pouch cell using infrared thermography and electrochemical modelling for the design of effective battery thermal management system10.1016/j.apenergy.2024.124301 ↗
62. Inhomogeneity and relaxation phenomena in the graphite anode of a lithium-ion battery probed by in situ neutron diffraction10.1016/j.jpowsour.2017.06.060 ↗
63. Mechanistic details of the spontaneous intercalation of Li metal into graphite electrodes10.1149/1945-7111/abc8c3 ↗
64. Parametric analysis of anodic degradation mechanisms for fast charging lithium batteries with graphite anode10.1016/j.commatsci.2021.110979 ↗
65. Study of the consumption of vinylene carbonate in Li[Ni0.33Mn0.33Co0.33]O2/Graphite pouch cells10.1149/2.0351410jes ↗
66. Analyzing the effect of electrolyte quantity on the aging of lithium-ion batteries10.1002/advs.202405897 ↗
67. A review on lithium-ion battery ageing mechanisms and estimations for automotive applications10.1016/j.jpowsour.2013.05.040 ↗
68. Development of a lifetime prediction model for lithium-ion batteries based on extended accelerated aging test data10.1016/j.jpowsour.2012.05.012 ↗
69. Cycle-induced interfacial degradation and transition-metal cross-over in LiNi0.8Mn0.1Co0.1O2–Graphite cells10.1021/acs.chemmater.1c02722 ↗
70. Short-term tests, long-term predictions – accelerating ageing characterisation of lithium-ion batteries10.1002/batt.202300594 ↗
71. Transient self-discharge after formation in lithium-ion cells: impact of state-of-charge and anode overhang10.1149/1945-7111/acf164 ↗
72. Extra throughput versus days lost in V2G services: influence of dominant degradation mechanism10.1016/j.est.2024.114242 ↗