Characterization of the grain boundary strength of polycrystalline NMC811 using in situ micro tensile tests
Source abstract
Abstract
(NMC) is one of the most relevant lithium-ion battery cathode materials. In this study, micromechanical tests were used to examine the fracture behavior of (NMC811) secondary particles. Furthermore, the grain boundary strength was measured and the grain boundary stiffness was estimated to 521 GPa µm -1 . Using an optimized push-to-pull sample geometry produced by focused ion beam (FIB) technology and measuring the displacement through digital image correlation (DIC), micro tensile tests were performed and validated against nanoindentation. A Weibull distribution characteristic tensile strength of 745 MPa followed by a brittle fracture behavior was measured. The fracture surface was examined and showed an intercrystalline fracture. Through electron backscatter diffraction (EBSD) analysis, less frequently occurring transcrystalline fracture was detected. Scanning transmission electron microscopy (STEM) showed a slight increase in dislocation density within the testing section in comparison to reference positions. The results can be used for a more detailed understanding of the mechanical degradation during the cycling of batteries as well as for building accurate simulation models.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and mechanical properties · Composite Material Mechanics · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Lithium-ion battery aging mechanisms and diagnosis method for automotive applications: Recent advances and perspectives
2. Mesoscale-architecture-based crack evolution dictating cycling stability of advanced lithium ion batteries10.1016/j.nanoen.2020.105420 ↗
3. Cr-containing diamond-like carbon coatings deposited on 316 stainless steel substrates: Characterization and interfacial fracture toughness measurements
4. How to avoid FIB-milling artefacts in micro fracture? A new geometry for interface fracture
5. Effect of nitrogen doping on the mechanical properties of carbon nanotubes10.1021/nn102372w ↗
6. Lou · 2011
7. Oh · 2013
8. The theta specimen for determining tensile strength of brittle materials
9. A novel test method for measuring mechanical properties at the small-scale: the theta specimen10.1002/9780470291221.ch15 ↗
10. Nanobubble fragmentation and bubble-free-channel shear localization in helium-irradiated submicron-sized copper10.1103/PhysRevLett.117.215501 ↗
11. Overview on established and novel FIB based miniaturized mechanical testing using in-situ SEM10.3139/146.110149 ↗
12. A new push-pull sample design for microscale mode 1 fracture toughness measurements under uniaxial tension10.1111/ffe.12741 ↗
13. 3D printed micro-mechanical device (MMD) for in situ tensile testing of micro/nanowires10.1016/j.eml.2019.100575 ↗
14. Intrinsic toughening in monolayer amorphous carbon nanocomposites10.1016/j.matt.2025.102000 ↗
15. Mechanical response of monolayer graphene via a multi-probe approach10.1016/j.ijmecsci.2024.109208 ↗
16. Strength and fracture measurements at the nano scale10.1063/1.2799362 ↗
17. Theta-like specimens for measuring mechanical properties at the small-scale: effects of non-ideal loading10.3139/146.101527 ↗
18. Push-to-pull tensile testing of ultra-strong nanoscale ceramic–polymer composites made by additive manufacturing10.1016/j.eml.2015.03.006 ↗
19. Nanoscale printed tunable specimen geometry enables high-throughput miniaturized fracture testing10.1016/j.matdes.2023.112329 ↗
20. On the application of Xe+ plasma FIB for micro-fabrication of small-scale tensile specimens10.1007/s11340-019-00528-w ↗
21. Properties and determination of the interface stiffness10.1016/j.actamat.2006.08.038 ↗
22. Intrinsic origin of intra-granular cracking in Ni-rich layered oxide cathode materials
23. Nanoindentation measurements of anisotropic mechanical properties of single crystalline NMC cathodes for li-ion batteries10.1016/j.eml.2022.101920 ↗
24. Electronic structure and comparative properties of Image 1003 cathode materials10.1021/acs.jpcc.7b00810 ↗
25. Anisotropic mechanical properties of Image 1004 cathodes for li-ion batteries: A first-principles theoretical study
26. Elastic mechanics study of layered Image 1005
27. In-situ nanoindentation measurement of local mechanical behavior of a li-ion battery cathode in liquid electrolyte10.1007/s11340-018-00451-6 ↗
28. Grid indentation analysis of mechanical properties of composite electrodes in li-ion batteries10.1016/j.eml.2016.03.002 ↗
29. Mechanical and structural degradation of Image 1006 cathode in li-ion batteries: An experimental study10.1149/2.1751713jes ↗
30. Mechanical properties of cathode materials for lithium-ion batteries10.1016/j.joule.2022.04.001 ↗
31. Capacity fading behavior of Ni-rich layered cathode materials in li-ion full cells10.1016/j.jelechem.2016.10.032 ↗
32. Fracture behavior of single Image 1007 particles studied by flat punch indentation10.1149/2.0331913jes ↗
33. Enhanced mechanical strength and electrochemical performance of core–shell structured high–nickel cathode material10.1016/j.jpowsour.2019.227395 ↗
34. Ultrafine-grained Ni-rich layered cathode for advanced li-ion batteries10.1039/D1EE02898G ↗
35. Designer particle morphology to eliminate local strain accumulation in high-nickel layered cathode materials10.1021/acsenergylett.3c01272 ↗
36. Opening a new horizon for the facile synthesis of long-life Ni-rich layered cathode10.1021/acsenergylett.3c01322 ↗
37. Optimization of molybdenum-doped Ni-rich layered cathodes for long-term cycling
38. Fracture testing of lithium-ion battery cathode secondary particles in-situ inside the scanning electron microscope10.1002/batt.202300032 ↗
39. Microstructure informed mechanical properties and chemomechanical degradation of battery cathode particles10.1007/s11340-025-01222-w ↗
40. NIH image to imagej: 25 years of image analysis10.1038/nmeth.2089 ↗
41. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
42. Mechanical properties of heterogeneous, porous LiFePO4 cathodes obtained using statistical nanoindentation and micromechanical simulations10.1016/j.jpowsour.2022.231565 ↗
43. Fundamental mechanisms of fracture and its suppression in Ni-rich layered cathodes: Mechanics-based multiscale approaches10.1016/j.eml.2018.05.010 ↗
44. Determining the fundamental failure modes in Ni-rich lithium ion battery cathodes10.1016/j.jeurceramsoc.2023.08.021 ↗
45. First cycle cracking behaviour within Ni-rich cathodes during high-voltage charging10.1149/1945-7111/ace130 ↗
46. Measuring microscale mechanical properties of pvdf binder phase and the binder-particle interface using micromechanical testing10.1016/j.msea.2023.145352 ↗
47. Enhanced strength and temperature dependence of mechanical properties of li at small scales and its implications for li metal anodes10.1073/pnas.1615733114 ↗
48. Irwin · 1961