One-step surface modification of O3-layered oxide for sodium-ion batteries with improved cycling performance
Source abstract
Abstract
O3-layered oxide NFM111 (NaNi 1/3 Fe 1/3 Mn 1/3 O 2 ) is a promising cathode for sodium-ion batteries, but its application is hindered by poor cycling stability, arising from alkaline surface residuals formed during handling and processing. These species promote parasitic reactions cathode–electrolyte interphase (CEI), leading to progressive impedance growth and particle surface degradation during cycling. Here, a simple one-step surface modification strategy is reported, in which dicarboxylic acids are introduced during slurry mixing to neutralise these residues and stabilise the NFM111 particle surface prior to cycling. Malonic acid (C3) at 0.3 wt% is identified as the optimal additive. XPS confirms removal of residuals and formation of a protective sodium malonate layer, reducing impedance growth during cycling. The modified slurries exhibit shear-thinning and high yield stress. The optimised electrode delivers an initial capacity of 124 mAh·g −1 and improves capacity retention from 79% to 89% after 120 cycles (2.0–4.0 V), and enhanced rate capability, exhibiting a capacity of 110 mAh·g −1 at 2C, compared to 95 mAh·g −1 for the reference. Post-cycling SEM after 180 cycles shows markedly reduced particle surface degradation and edge damage, while XRD shows no difference in the bulk crystal structure, confirming the improvement is surface-mediated mechanism.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Semiconductor materials and devices · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Comprehensive review of sodium-ion batteries: principles, materials, performance, challenges, and future perspectives10.1016/j.mseb.2024.117870 ↗
2. Routes to high-performance layered oxide cathodes for sodium-ion batteries10.1039/D3CS00929G ↗
3. Sodium-ion batteries: present and future10.1039/C6CS00776G ↗
4. Sodium-driven rechargeable batteries: an effort towards future energy storage10.1246/cl.200568 ↗
5. The research and industrialization progress and prospects of sodium ion battery10.1016/j.jallcom.2023.170486 ↗
6. Effect of Ni/Fe/Mn ratio on electrochemical properties of the O3–NaNi1-x-yFexMnyO2 (0.25 ≤ x,y ≤ 0.75) cathode materials for Na-ion batteries10.1016/j.jpowsour.2024.234092 ↗
7. Benchmarking the performance of moisture-sensitive battery materials: the importance of the electrode preparation method10.1021/acsaem.3c00926 ↗
8. Competition between the Ni and Fe redox in the O3-NaNi1/3Fe1/3Mn1/3O2Cathode material for Na-Ion batteries10.1021/acs.chemmater.3c00338 ↗
9. High performance cathode materials for sodium ion batteries
10. Xie · ACS Appl. Energy Mater. · 2020
11. Origin of air-stability for transition metal oxide cathodes in sodium-ion batteries
12. Decoupling the air sensitivity of Na-layered oxides10.1126/science.adm9223 ↗
13. Degradation mechanism of O3-Type NaNi1/3Fe1/3Mn1/3O2 cathode materials during ambient storage and their in situ regeneration Yang
14. Enhancing electrochemical performance of sodium-ion batteries: optimal Ca2+ doping in O3-NaNi0.33Mn0.33Fe0.33O2 layered oxide cathode materials10.1016/j.jelechem.2024.118541 ↗
15. Impact of calcium on air stability of Na[Ni 1/3 Fe 1/3 Mn 1/3 ]O 2 positive electrode material for sodium-ion batteries
16. O3-Type Na0.95Ni0.40Fe0.15Mn0.3Ti0.15O2 cathode materials with enhanced storage stability for high-energy Na-Ion batteries10.1021/acsami.3c02514 ↗
17. Sb-Doped O3-NaNi0.3Fe0.2Mn0.5O2 cathode with improved cyclic stability for sodium-ion batteries10.1021/acsaem.4c01617 ↗
18. A high-rate and air-stable cathode material for sodium-ion batteries: yttrium-substituted O3-type Ni/Fe/Mn-based layered oxides10.1039/D4TA01852D ↗
19. Ca-doped Na-site NaNi1/3Fe1/3Mn1/3O2 as a high-performance cathode material for sodium ion batteries10.1016/j.jallcom.2023.172977 ↗
20. Interlayer substitution enables air-stable and long-life O3-type cathode for sodium-ion batteries10.1016/j.jpowsour.2024.235508 ↗
21. V doping enhancing structural stability and Na-ion migration in O3-NaNi1/3Fe1/3Mn1/3O2 cathode for sodium-ion batteries10.1016/j.est.2025.117775 ↗
22. An in situ dual-modification strategy for O3-NaNi1/3Fe1/3Mn1/3O2 towards high-performance sodium-ion batteries10.1039/D3TA03640E ↗
23. Modulating the structure of O3-type NaNi1/3Fe1/3Mn1/3O2 for high-performance sodium-ion batteries via Na2MoO4 reactive wetting coating combined with Mo doping and interface reconstruction10.1016/j.jcis.2025.01.087 ↗
24. A one-step dual modification strategy for enhancing sodium storage in O3-type NaNi1/3Fe1/3Mn1/3O2 cathodes10.1039/D5TA02330K ↗
25. NaTi2(PO4)3 modified O3-type NaNi1/3Fe1/3Mn1/3O2 as high rate and air stable cathode for sodium-ion batteries10.1016/j.electacta.2023.141859 ↗
26. The porous polysilane-coated NFM111 cathode prepared by in-situ polymerization of ethyl orthosilicate with improved rate and cycle stability for Na ion battery10.1016/j.apsusc.2025.162716 ↗
27. A cross-linked polymer coating strategy to enhance the performance of NaNi0.33Fe0.33Mn0.33O2 cathode for sodium-ion batteries
28. Unveiling the origin of air stability in polyanion and layered-oxide cathode materials for sodium-ion batteries and their practical application considerations
29. Bilayer surface modification of biphasic O3/P2 layered cathode for high voltage sodium ion battery10.1016/j.est.2025.117540 ↗
30. Defensive and ion conductive surface layer enables high battery cathode
31. Dual-enhancements of stability and wettability in O3-Na0.95Ni1/3Fe1/3Mn1/3O2 cathodes by converting surface residual alkali into ultrathin Na2Ti3O7 coatings10.1039/D4NR05375C ↗
32. Synergistic bulk and interface engineering of layered oxide cathodes for Na-Ion batteries10.1021/acsenergylett.4c03601 ↗
33. Optimized surface alkali conversion and regulate the near-surface structure to enable high-performance sodium-ion batteries10.1021/acsaem.4c01707 ↗
34. Applied surface science Near-surface structure reconstruction for long-life single-crystal NaNi 1/3 Fe 1/3 Mn 1/3 O 2 by washing treatment10.1016/j.apsusc.2025.164437 ↗
35. Excellent performance of sodium ion battery cathode materials benefiting from the inorganic acid regulating strategy10.1021/acssuschemeng.4c08326 ↗
36. Surface-modified Na(Ni0.3Fe0.4Mn0.3)O2Cathodes with enhanced cycle life and air stability for sodium-ion batteries10.1021/acsaem.1c02485 ↗
37. Oxalic acid as a cathode additive increasing rate capability of Ni-Rich layered cathode materials oxalic acid as a cathode additive increasing rate capability of Ni-Rich layered cathode
38. Interactions between organic additives and active powders in water-based lithium iron phosphate electrode slurries10.1016/j.jpowsour.2012.07.125 ↗
39. Battery electrode slurry rheology and its impact on manufacturing10.1039/D4YA00380B ↗
40. A novel slurry concept for the fabrication of lithium-ion battery electrodes with beneficial properties10.1016/j.jpowsour.2014.04.115 ↗
41. Dispersion, agglomeration, and gelation of LiFePO4 in water-based slurry10.1016/j.jpowsour.2016.02.003 ↗
42. Revisiting the electrode manufacturing: a look into electrode rheology and active material microenvironment10.1016/j.jechem.2022.04.038 ↗
43. Effect of TMAH on rheological behavior of SiC aqueous suspension10.1016/j.jeurceramsoc.2003.12.023 ↗
44. Mechanism of gelation in high nickel content cathode slurries for sodium-ion batteries10.1016/j.jcis.2022.07.033 ↗
45. X-Ray photoelectron spectroscopy characterization of amorphous and crystalline poly(tetrahydrofuran): experimental and theoretical study10.1016/0032-3861(94)90468-5 ↗
46. XPS study of polymer/organometallic interaction: trimethyl aluminum on polyvinyl alcohol polymer10.1016/0169-4332(89)90483-2 ↗
47. Adsorption of some substituted ethylene molecules on Pt(111) at 95 K part 1: NEXAFS, XPS and UPS studies10.1016/0039-6028(95)01254-0 ↗
48. Adsorption and dissociation of CH3OH on clean and K-promoted Pd(100) surfaces10.1016/0039-6028(93)90430-R ↗
49. An in-situ X-ray photoelectron study of the interaction between vapor-deposited Ti atoms and functional groups at the surfaces of self-assembled monolayers10.1016/0039-6028(95)80048-4 ↗
50. Molecular spectroscopy by means of Esca
51. XPS study of group IA carbonates
52. ESCA characterization of heparin-like fluoropolymers obtained by functionalization after grafting induced by swift heavy ion irradiation10.1016/0168-583X(95)00823-3 ↗
53. A comparison of different spectrometers and charge corrections used in X-ray photoelectron spectroscopy10.1016/0368-2048(77)85010-X ↗
54. Wagner · 1979
55. Air corrosion of layered cathode materials for sodium-ion batteries: cation mixing and a practical suppression strategy10.1021/acsnano.4c01962 ↗
56. Xie
57. Physics-based battery model parametrisation from impedance data physics-based battery model parametrisation from impedance data10.1149/1945-7111/add41b ↗
58. Use of three-terminal impedance spectroscopy to characterize sodium-ion batteries at various stages of cycle life use of three-terminal impedance spectroscopy to characterize sodium-ion batteries at various stages of cycle life10.1149/1945-7111/ad1c0f ↗
59. half-cell by standardization on electrochemical
60. Designing high-valence sulfur-containing stable and low impedance interface films simultaneously on cathode and anode in the NaNi1/3Fe1/3Mn1/3O2 (NFM)||hard carbon (HC) pouch cells10.1016/j.jechem.2024.12.027 ↗
61. Estimation of state of health of lithium-ion batteries based on charge transfer resistance considering di ff erent temperature and state of charge10.1016/j.est.2018.11.020 ↗