journal article·2026-07

A cost-effective method for measuring fuel cell anode inlet relative humidity: Bounding the range

Xu Hu, Tong Zhang

Publisher page

Abstract

Measuring anode humidity is critical for proton exchange membrane fuel cells, yet direct measurement remains challenging due to sensor cost. This paper presents an economical experimental method for estimating the range of anode inlet relative humidity using pressure, temperature, and flow rate measurements. The approach combines a dry hydrogen baseline test to calibrate the anode flow field resistance coefficient with a wet hydrogen test under saturated recirculation conditions. The upper humidity bound is derived from ejector physics, while the lower bound is obtained from the measured pressure drop across the anode flow field. A decline in inlet gas temperature is identified as a marker for liquid water existence, defining the method's valid single-phase operating window. Within this window, the estimated partial pressure bounds form a narrow and stable band, providing a physically-grounded envelope for the true inlet humidity. The resulting range serves as a quantitative benchmark for validating model-based state observers and enables robust, worst-case-based control strategies for flooding mitigation. This work transforms simple sensor data into actionable water management insights, offering a low-entry barrier method for research and product development.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Nursing Education, Practice, and Leadership · Advancements in Solid Oxide Fuel Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Water management on hydrogen-oxygen proton exchange membrane fuel cell with dead-ended anode and cathode10.1080/15435075.2025.2544667 ↗
2. Effect of humidity on the sensitivity and stability of proton exchange membrane fuel cells under ultra-low hydrogen pressure10.1016/j.ijhydene.2024.12.088 ↗
3. Ionic conductivity and hydrogen crossover for IT-PEMFCs: influence of pressure, temperature, relative humidity and reinforcement10.1016/j.ijhydene.2024.06.286 ↗
4. Effect of humidity and flooding on the performance of proton exchange membrane fuel cell
5. Flexible micro-sensors on stainless steel foil for monitoring proton exchange membrane fuel cells
6. Electrode-integrated textile-based sensors for in situ temperature and relative humidity monitoring in electrochemical cells10.1021/acsomega.0c06309 ↗
7. Novel in situ measurements of relative humidity in a polymer electrolyte membrane fuel cell10.1016/j.jpowsour.2008.09.109 ↗
8. Multiple in-situ measurement of water transport in the bipolar plate of proton exchange membrane fuel cell10.1016/j.ijheatmasstransfer.2024.125269 ↗
9. Real-time remote monitoring of temperature and humidity within a proton exchange membrane fuel cell using flexible sensors10.3390/s110908674 ↗
10. Spatially resolved optical measurements of water partial pressure and temperature in a PEM fuel cell under dynamic operating conditions10.1016/j.jpowsour.2006.06.073 ↗
11. In-situ optical measurements of water vapor concentration and temperature in a proton exchange membrane fuel cell at steady state and under dynamic cycling
12. In situ measurements of water vapor partial pressure and temperature dynamics in a PEM fuel cell10.1149/1.3247355 ↗
13. Applying hot-wire anemometry to directly measure the water balance in a proton exchange membrane fuel cell for a pre-humidified hydrogen stream10.1016/j.ijhydene.2016.01.136 ↗
14. Measurement of water, temperature and current distributions in anode of polymer electrolyte fuel cell during low humidity operation10.1115/AJTEC2011-44549 ↗
15. Quantitative estimation of water vapor distribution in low-humidity proton exchange membrane fuel cell using humidity test paper10.1016/j.jpowsour.2013.01.160 ↗
16. Isolation of transport mechanisms in PEFCs using high resolution neutron imaging10.1016/j.ijhydene.2013.12.021 ↗
17. Measurement of liquid water accumulation in a PEMFC with dead-ended anode10.1149/1.2976356 ↗
18. Quantitative multi-scale operando diagnosis of water localization inside a fuel cell10.1149/2.1401614jes ↗
19. In situ measurement of relative humidity in a PEM fuel cell using fibre bragg grating sensors10.1016/j.ijhydene.2014.08.010 ↗
20. Humidity sensor based on optical fiber bragg grating with high sensitivity and fast response
21. Humidity standard of compressed hydrogen for fuel cell technology10.1149/1.2921574 ↗
22. A viscosity equation for gas mixtures10.1063/1.1747673 ↗
23. Effect of nitrogen crossover on purging strategy in PEM fuel cell systems10.1016/j.apenergy.2013.06.057 ↗
24. Anode state observation of polymer electrolyte membrane fuel cell based on unscented kalman filter and relative humidity sensor before flooding10.1016/j.renene.2020.12.085 ↗
25. A new nonlinear observer for liquid water estimation in fuel cells10.1109/TCST.2023.3337512 ↗
26. Model-based observer for vehicle proton exchange membrane fuel cell humidity based on adaptive sliding mode estimation technique10.1016/j.ijhydene.2023.04.165 ↗
27. Dew Point Temperature Sensor, -20∼100°C Dewpoint, 80∼180°C Temp n.d. https://www.ato.com/dew-point-temperature-sensor (accessed April 15, 2026)..
28. MICHELL easidew pro 2A85-450 DP Tx | high-precision ind moisture measurement n.d. https://sensor-industrial.sale.ecer.co.uk/pz7cdbc9d-michell-easidew-pro-2a85-450-dp-tx-high-precision-ind-moisture-measurement.html(accessed April 13, 2026)..