journal article·2026-07Open access

A dual-locked anions strategy constructing a composite electrolyte film for stable solid-state lithium metal batteries

Kai Yu, Chunyu Liu, Qiao Zhang, Zhiying Miao, Huipeng Zeng, Yifei Qin, Shanshan Li, Ruonan Zhu, Zhenyao Wei, Jie Li, Jun Wang, Yonghong Deng, Shang-Sen Chi, Xiaoxiong Xu

Abstract

The practical application of poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP)-based composite solid-state electrolytes (CSEs) incorporating garnet-type Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 (LLZTO) is hindered by poor organic-inorganic interfacial compatibility. Residual Li 2 CO 3 /LiOH on LLZTO causes filler agglomeration and interfacial polarization. Herein, we propose an interfacial engineering strategy using a brief (10 s) dilute hydrochloric acid pickling treatment to remove alkali impurities from LLZTO without damaging its structure. The modified LLZTO surface, with exposed Lewis acid sites and trace Li 2 CO 3 , induces controlled dehydrofluorination of PVDF-HFP, generating −C=C− bonds along polymer chains. This creates a “dual-locked anions” mechanism that firmly anchors TFSI − anions. The optimized PVDF-HFP/LLZTO CSE achieves a high ionic conductivity of ∼1 mS cm −1 at room temperature and a lithium-ion transference number of 0.47, effectively suppressing lithium dendrite growth and interfacial polarization. The assembled solid-state lithium metal battery using LiNi 0.8 Co 0.1 Mn 0.1 O 2 cathode exhibits exceptional cycling stability (138.42 mAh g −1 after 200 cycles between 2.8 V and 4.3 V), high Coulombic efficiency (>99% even between 2.8 and 4.5 V), and a broad operating temperature range (from −20 °C to 80 °C). This work offers a novel strategy for high-performance CSEs through interfacial anion dynamics management.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Thermal Expansion and Ionic Conductivity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. A critical review on Li-ion transport, chemistry and structure of ceramic–polymer composite electrolytes for solid state batteries10.1039/D4CS00214H ↗
2. All-solid-state Li–S batteries with fast solid–solid sulfur reaction10.1038/s41586-024-08298-9 ↗
3. Tailoring practically accessible polymer/inorganic composite electrolytes for all-solid-state lithium metal batteries: a review10.1007/s40820-022-00996-1 ↗
4. Polymer‐based solid‐state electrolytes for high‐energy‐density lithium‐ion batteries–review10.1002/aenm.202301746 ↗
5. Advances in electrolyte safety and stability of ion batteries under extreme conditions10.1007/s12274-022-4871-x ↗
6. Hybrid electrolytes for solid-state lithium batteries: challenges, progress, and prospects
7. Approaching practically accessible solid-state batteries: stability issues related to solid electrolytes and interfaces10.1021/acs.chemrev.9b00268 ↗
8. Electrospinning techniques for inorganic–organic composite electrolytes of all-solid-state lithium metal batteries: a brief review10.1039/D3TA02761A ↗
9. Recent advances in solving Li2CO3 problems in garnet-based solid-state battery: a systematic review (2020–2023)10.1016/j.jechem.2023.10.040 ↗
10. Reducing surface roughness to achieve Li2CO3‐Existent lithiophilic interface in garnet‐type solid‐state batteries
11. Surface Li2CO3 mediated phosphorization enables compatible interfaces of composite polymer electrolyte for solid‐state lithium batteries10.1002/adfm.202303574 ↗
12. Synergistic coupling between Li6. 75La3Zr1. 75Ta0. 25O12 and poly (vinylidene fluoride) induces high ionic conductivity, mechanical strength, and thermal stability of solid composite electrolytes10.1021/jacs.7b06364 ↗
13. Spectroscopic evidence and mechanistic insights on dehydrofluorination of PVDF in alkaline medium10.1016/j.eurpolymj.2023.112580 ↗
14. High-performance lithium metal batteries enabled by a nano-sized garnet solid-state electrolyte modified separator10.1016/j.cej.2023.148038 ↗
15. Z. Zhang, J. Liu, L. Liu, X. Hu, H. Luo, Y. Su, J. Zeng, Z. Jiang, Y. Wang, F. Wang, Z. Sun, Z. Zhong, S. Tang, Z. Tang, X. Cai, S. Zhong, R. Wang, Unlocking superior conductivity in MOF electrodes via a MXene-Activated electronic inversion layer, Adv. Energy Mater., 2026, e70713.10.1002/aenm.70713 ↗
16. In situ coating Li3PO4 on Li6.5La3Zr1.5Ta0.5O12 achieving lithium dendrites inhibition and high chemical stability10.1002/bte2.70009 ↗
17. Enabling high-areal-capacity all-solid-state lithium-metal batteries by tri-layer electrolyte architectures10.1016/j.ensm.2019.06.006 ↗
18. Ionic transport mechanisms in inorganic solid electrolytes: interface, NMR and DNP studies
19. Cutting‐edge developments at the interface of inorganic solid‐state electrolytes
20. Multiscale design strategies of interface‐stabilized solid electrolytes and dynamic interphase decoding from atomic-to-macroscopic perspectives10.1002/aenm.202502938 ↗
21. Rapid discovery of inorganic-organic solid composite electrolytes by unsupervised learning10.1016/j.cej.2022.140151 ↗
22. Polymer electrolytes for rechargeable batteries: from nanocomposite to nanohybrid10.1149/1945-7111/ab7221 ↗
23. Development of polymer blend electrolytes for battery systems: recent progress, challenges, and future outlook10.1007/s40243-023-00231-w ↗
24. Covalent grafting interface engineering to prepare highly efficient and stable polypropylene/mesoporous SiO2 separator for Li-ion batteries10.1016/j.apsusc.2020.148405 ↗
25. Grafting‐engineered interfacial desolvation dynamics: a universal strategy for low‐temperature li‐metal batteries
26. Electrode protection and electrolyte optimization via surface modification strategy for high‐performance lithium batteries
27. Enabling high rate capability and stability all-solid-state batteries via cationic surfactant modification of composite electrolyte10.1016/j.jcis.2023.08.056 ↗
28. The critical role of fillers in composite polymer electrolytes for lithium battery10.1007/s40820-023-01051-3 ↗
29. TFSI anion grafted polymer as an ion-conducting protective layer on magnesium metal for rechargeable magnesium batteries10.1016/j.ensm.2022.06.014 ↗
30. Anion-immobilized polymer electrolyte achieved by cationic metal-organic framework filler for dendrite-free solid-state batteries10.1016/j.ensm.2019.01.007 ↗
31. Polymer gel electrolytes containing sodium salts with BF4−, ClO4− and CF3SO3− anions immobilized in TEGDME molecular liquid for sodium battery and electric double layer capacitor10.1016/j.ssi.2023.116375 ↗
32. Inorganic-polymer composite electrolytes: basics, fabrications, challenges and future perspectives10.1515/revic-2023-0030 ↗
33. Advancements and challenges in organic–inorganic composite solid electrolytes for all-solid-state lithium batteries10.1007/s40820-024-01498-y ↗
34. A fast and low-cost interface modification method to achieve high-performance garnet-based solid-state lithium metal batteries10.1016/j.nanoen.2021.106643 ↗
35. Drawing a soft interface: an effective interfacial modification strategy for garnet-type solid-state Li batteries10.1021/acsenergylett.8b00453 ↗
36. Removal and reoccurrence of LLZTO surface contaminants under glovebox conditions10.1021/acsami.4c00444 ↗
37. A vision for LLZO carbonate formation: perspectives on surface treatment approaches and characterization techniques10.1002/celc.202400136 ↗
38. Perspective on lewis acid‐base interactions in emerging batteries10.1002/adma.202406151 ↗
39. Suppressing H2–H3 phase transition in high Ni–low Co layered oxide cathode material by dual modification10.1039/D0TA07965K ↗
40. Insights into improving the li‐ion transference number and Li deposition uniformity toward a high‐current‐density lithium metal anode
41. Enhancing microdomain consistency in polymer electrolytes towards sustainable lithium batteries
42. Revealing the dual-layered solid electrolyte interphase on lithium metal anodes via cryogenic electron microscopy10.1021/acsenergylett.3c00505 ↗
43. Revealing the multifunctions of Li3N in the suspension electrolyte for lithium metal batteries10.1021/acsnano.2c12470 ↗
44. Dynamically stable and intimately bonded Li/Garnet interface for high‐areal‐capacity solid‐state lithium‐metal batteries
45. Polymer electrolytes for compatibility with NCM cathodes in solid-state lithium metal batteries: challenges and strategies10.1002/bte2.20240063 ↗
46. Overdischarge of spent lithium ion batteries induced copper deposition onto cathode for better upcycling10.1002/bte2.70096 ↗