Rheo-impedance spectroscopy for correlating slurry properties with LiFePO4 cathode performance in lithium-ion batteries
Source abstract
Abstract
In lithium-ion battery manufacturing, electrode performance variability often arises from the slurry dispersion state, which evolves during coating but is difficult to quantify in real time. We investigate the relationship between shear-dependent slurry microstructure and electrochemical performance of LiFePO 4 cathodes using rheo-impedance spectroscopy, integrating controlled shear with electrochemical impedance spectroscopy. At a coating gap of 500 μm and shear rates from 1.3 × 10 0 to 2.0 × 10 2 s −1 , we monitor the total slurry resistance ( R slurry ) during flow and compare it with electrode resistance ( R electrode ). R slurry depends nonmonotonically on shear rate, reflecting the transition of carbon black conductive additives from aggregated to dispersed and, under excessive shear, overly fragmented states. R slurry and R electrode are inversely correlated, indicating that slurry-level conductive network evolution influences static electron transport in the final electrode. Cross-sectional energy-dispersive X-ray spectroscopy supports this interpretation, revealing shear-induced redistribution of conductive additives. Fabricating electrodes within the optimal shear range (≈5.0 × 10 1 s −1 ) decreases interfacial resistance, improves rate capability, and enhances cycling stability. These findings suggest that rheo-impedance spectroscopy links slurry processing and cell performance, which possibly enable rapid screening of coating parameters and data-driven optimization of electrode manufacturing.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Li-ion battery materials: Present and future10.1016/j.mattod.2014.10.040 ↗
2. The Li-ion rechargeable battery: A perspective10.1021/ja3091438 ↗
3. Building better batteries10.1038/451652a ↗
4. A polymer-binder-free approach to creating functional LiFePO4 cathodes by organic ionic plastic crystal-derived ion-conductive binders10.3390/batteries11010003 ↗
5. Dispersion homogeneity of silicon anode slurries with various binders for Li-ion battery anode coating10.3390/polym15051152 ↗
6. The effect of solid content on the rheological properties and microstructures of a Li-ion battery cathode slurry10.1039/D0RA02651D ↗
7. Relation between mixing processes and properties of lithium-ion battery electrode-slurry10.5796/electrochemistry.21-00076 ↗
8. Rheological properties and stability of NMP based cathode slurries for lithium ion batteries10.1016/j.ceramint.2013.08.137 ↗
9. Impact of formulation and slurry properties on lithium-ion electrode manufacturing10.1002/batt.202300396 ↗
10. Effect of coating operating parameters on electrode physical characteristics and final electrochemical performance of lithium-ion batteries10.1007/s40095-022-00481-w ↗
11. Impact of CB dispersion on the performance of lithium-ion battery cathodes10.1016/j.est.2024.113244 ↗
12. Optimization of LiFePO4 nanoparticle suspensions with polyethyleneimine for aqueous processing10.1021/la205157d ↗
13. Assessing the coating implications of slurry formulations in NCMA and LFMP blend cathodes for lithium-ion batteries10.1016/j.jpowsour.2025.236734 ↗
14. Optimization of mixing speed and time to disperse the composite conductive agent composed of carbon black and graphene in lithium-ion battery slurry10.1016/j.partic.2024.04.007 ↗
15. A Rheo-impedance investigation on the interparticle interactions in the catalyst ink and its impact on electrode network formation in a proton exchange membrane fuel cell10.1016/j.apenergy.2024.122680 ↗
16. Aqueous dispersions of highly conductive carbon nanomaterials: Unusual aggregation mechanism10.1016/j.molliq.2024.124439 ↗
17. In situ rheoimpedance and thermogravimetry–differential thermal analysis of copper-based conductive inks for high-oxidation-resistant performance10.1021/acsaelm.4c01894 ↗
18. Rheo-impedance behavior during the gelation process of a gelatin solution10.1021/acsomega.5c02177 ↗
19. Rheo-impedance behavior of cellulose nanofibers produced by mechanical processing10.1007/s10570-024-06242-8 ↗
20. Rheo-impedance measurements for the dispersibility evaluation of electrode slurries10.1021/acsaelm.3c00612 ↗
21. Modelling approaches of the dispersion process for conductive slurries in chemical process industries10.1002/adem.202401089 ↗
22. Dimensional effects on the electronic conductivity and rheological behaviors of LiFePO4 catholytes for rechargeable lithium slurry flow battery10.1016/j.electacta.2022.140956 ↗
23. Interpretation and modelling of the electrochemical impedance of LiFePO4/Li4Ti5O12 batteries10.1149/1945-7111/abf9c1 ↗
24. Separation of charge transfer and contact resistance in LiFePO4-cathodes by impedance modeling10.1149/2.030207jes ↗
25. Studies on LiFePO4 as cathode material using impedance spectroscopy10.1016/j.jpowsour.2010.09.121 ↗
26. Impedance spectroscopy of Li electrodes. 4. A general simple model of the Li-solution interphase in polar aprotic systems10.1021/jp9514279 ↗
27. Impedance spectroscopy of lithium electrodes. Part 1. General behavior in propylene carbonate solutions and the correlation to surface-chemistry and cycling efficiency10.1016/0022-0728(93)80129-6 ↗
28. Revealing the complex layered-mosaic structure of the cathode electrolyte interphase in Li-ion batteries
29. Inner carbon black porosity as characteristic parameter for the microstructure of lithium-ion electrodes and its effect on physical and electrochemical properties10.1016/j.jpowsour.2022.231259 ↗
30. Electrochemical determination of double-step energy potential based on activation energies for charge transfer and CEI in LFP/C cathodes10.1016/j.electacta.2025.147826 ↗
31. State-of-charge indication in Li-ion batteries by simulated impedance spectroscopy10.1007/s10800-016-1026-1 ↗
32. State of charge effects on the parameters of electrochemical impedance spectroscopy equivalent circuit model for lithium ion batteries10.1088/1755-1315/474/5/052038 ↗
33. Using carbon black to facilitate fast charging in lithium-ion batteries10.1016/j.jpowsour.2021.230342 ↗
34. Improvement of the electrochemical properties of Li3V2(PO4)3/C cathode material for lithium-ion batteries10.1002/pssa.201700935 ↗
35. Tailoring silicon composite anodes with Li+-containing organic ionic plastic crystals for solid-state batteries10.1149/1945-7111/ad29c5 ↗
36. Effect of carbon blacks on electrical conduction and conductive binder domain of next-generation lithium-ion batteries10.1016/j.jpowsour.2023.233916 ↗
37. Understanding the influence of conductive carbon additives surface area on the rate performance of LiFePO4 cathodes for lithium ion batteries10.1016/j.carbon.2013.07.083 ↗
38. In situ stress monitoring unravels particle-scale microstructural evolution in aging LiFePO4/graphite batteries10.1016/j.est.2025.120247 ↗
39. Modelling of lithium-ion battery electrode calendering: A critical review10.1016/j.est.2025.116702 ↗
40. Hybrid point-to-line conductive network of carbon nanotubes and Denka black for high-rate lithium-ion battery cathodes
41. Effect of hybrid conductive additives on all-solid-state lithium batteries using Li2S–P2S5 glass-ceramics10.1016/j.ceramint.2014.12.076 ↗
42. Hierarchical carbon nanotube/carbon black scaffolds as short- and long-range electron pathways with superior Li-ion storage performance10.1021/sc400239u ↗
43. Hybrid super-aligned carbon nanotube/carbon black conductive networks: A strategy to improve both electrical conductivity and capacity for lithium ion batteries10.1016/j.jpowsour.2013.01.102 ↗
44. Enhanced electrical conductivity of nanocomposites containing hybrid fillers of carbon nanotubes and carbon black10.1021/am9000503 ↗
45. Historical and prospective lithium-ion battery cost trajectories from a bottom-up production modeling perspective10.1016/j.est.2023.109800 ↗
46. Understanding the role of separator and electrolyte compatibility on lithium metal anode performance using ionic liquid-based electrolytes10.1021/acsaem.1c01114 ↗
47. Toward practical Li metal batteries: Importance of separator compatibility using ionic liquid electrolytes10.1021/acsaem.9b01175 ↗
48. Lithium ion battery degradation: What you need to know10.1039/D1CP00359C ↗
49. Review and performance comparison of mechanical-chemical degradation models for lithium-ion batteries10.1149/2.0281914jes ↗
50. A comprehensive capacity fade model and analysis for Li-ion batteries10.1149/2.040310jes ↗
51. The role of carbon black distribution in cathodes for Li ion batteries10.1016/S0378-7753(03)00250-7 ↗
52. Modeling of lithium plating induced aging of lithium-ion batteries: Transition from linear to nonlinear aging10.1016/j.jpowsour.2017.05.110 ↗
53. Prospects on large-scale manufacturing of solid-state batteries10.1557/s43581-021-00004-w ↗