journal article·2026-07Open access

Architecture-enabled 3D-Printed ultrathin electrolyte-supported solid oxide cells

I. Babeli, S. Márquez, N. Kostretsova, M. Nuñez, A. Morata, M. Torrell, A. Tarancón

Abstract

SOCs are highly efficient energy conversion devices capable of operating both as fuel cells for power generation and as electrolysis cells for energy storage. In electrolyte-supported configurations, reducing the electrolyte thickness is a key strategy to minimize ohmic losses and enhance performance; yet, this approach is severely constrained by mechanical stability and scalability when using conventional ceramic processing routes. Recent advances in ceramic 3D printing offer a promising alternative, enabling the production of ESCs; however, current approaches still present limitations in achieving self-supported electrolytes below 150 μm, thereby constraining the final cell performance. Here, stereolithography-based ceramic 3D printing is employed to fabricate ultrathin, self-supported 3 YSZ electrolytes with thicknesses down to 35 μm at the button-cell scale. Importantly, introducing a rib-patterned architecture enables successful scale-up to 25 cm2 active-area cells with a mean electrolyte thickness below 70 μm, achieving a peak power output of 5 W in SOFC mode and a total injected current of −10 A in SOEC mode at 900 °C. These results demonstrate that ceramic 3D printing, combined with architecture-enabled mechanical stabilization, provides a viable and scalable route toward high-performance electrolyte-supported solid oxide cells, achieving electrolyte thicknesses and performances comparable to conventional technologies while offering unprecedented design flexibility.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Perovskite Materials and Applications · Catalysis and Oxidation Reactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Optimization strategies for solid oxide fuel Cell (SOFC) application: a literature survey
2. The role of solid oxide fuel cells in future ship energy systems
3. Solid oxide fuel cells for power generation10.1002/wene.96 ↗
4. Solid oxide fuel cells (SOFCs): a review of an environmentally clean and efficient source of energy10.1016/S1364-0321(02)00014-X ↗
5. Singh · 2021 · 27643
6. A comprehensive review on durability improvement of solid oxide fuel cells for commercial stationary power generation systems10.1016/j.apenergy.2023.121864 ↗
7. Suitable operational strategy for power interchange operation using multiple residential SOFC (solid oxide fuel cell) cogeneration systems10.1016/j.energy.2009.09.029 ↗
8. Anode‐supported solid oxide fuel cell achieves 70 000 hours of continuous operation10.1002/ente.201600114 ↗
9. Operational and scaling-up barriers of SOEC and mitigation strategies to boost H2 production- a comprehensive review
10. Reversible fuel electrode supported solid oxide cells fabricated by aqueous multilayered tape casting
11. Shaping of 3YSZ porous substrates for oxygen separation membranes10.1016/j.jeurceramsoc.2017.05.032 ↗
12. Oxygen transfer processes in (la,Sr)MnO/Y O-stabilized ZrO 3 2 3 2 cathodes: an impedance spectroscopy study10.1016/S0167-2738(98)00142-8 ↗
13. Simultaneous generation of electricity, ethylene and decomposition of nitrous oxide via protonic ceramic fuel cell membrane reactor10.1016/j.jechem.2022.10.035 ↗
14. Enhanced performance of gadolinia-doped ceria diffusion barrier layers fabricated by pulsed laser deposition for large-area solid oxide fuel cells10.1021/acsaem.8b00039 ↗
15. Functional thin films as cathode/electrolyte interlayers: a strategy to enhance the performance and durability of solid oxide fuel cells10.1039/D2TA03641J ↗
16. Thin film barrier layers with increased performance and reduced long-term degradation in SOFCs10.1149/MA2021-03180mtgabs ↗
17. Solid oxide cell electrode nanocomposites fabricated by inkjet printing infiltration of ceria scaffolds10.3390/nano11123435 ↗
18. Co-electrolysis of steam and carbon dioxide in large area solid oxide cells based on infiltrated mesoporous oxygen electrodes
19. Binder jetting: a novel solid oxide fuel-cell fabrication process and evaluation10.1007/s11837-015-1296-9 ↗
20. The effect of electrode infiltration on the performance of tubular solid oxide fuel cells under electrolysis and fuel cell modes10.1016/j.ijhydene.2014.03.071 ↗
21. Fabrication of dense zirconia-toughened alumina ceramics through a stereolithography-based additive manufacturing10.1016/j.ceramint.2016.10.027 ↗
22. Digital light processing-stereolithography three-dimensional printing of yttria-stabilized zirconia10.1016/j.ceramint.2019.12.113 ↗
23. Robocasting of highly porous ceramics scaffolds with hierarchized porosity
24. Three dimensional printing of components and functional devices for energy and environmental applications10.1039/C6EE03526D ↗
25. Hybrid-3D printing of symmetric solid oxide cells by inkjet printing and robocasting
26. Large-area 3D printed electrolyte-supported reversible solid oxide cells
27. 2022 roadmap on 3D printing for energy
28. Comparison of performance and degradation of large-scale solid oxide electrolysis cells in stack with different composite air electrodes10.1016/j.ijhydene.2014.12.101 ↗
29. Additive manufacturing of large area SOC with advanced features10.1149/MA2021-03125mtgabs ↗
30. Three-dimensional printed yttria-stabilized zirconia self-supported electrolytes for solid oxide fuel cell applications10.1016/j.jeurceramsoc.2017.11.033 ↗
31. Three‐dimensional printing of multifunctional nanocomposites: manufacturing techniques and applications10.1002/adma.201506215 ↗
32. Topology-driven electromechanical actuation in 3D-printed TPMS piezoelectric ceramics10.1016/j.actamat.2025.121724 ↗
33. Additive manufacturing of zirconia ceramics: a state-of-the-art review
34. Accelerating fuel cell development with additive manufacturing technologies: state of the art, opportunities and challenges10.1002/fuce.201900164 ↗
35. 5 kW SOFC stack via 3D printing manufacturing: an evaluation of potential environmental benefits
36. Scataglini · 2015
37. A direct manufacturing cost model for solid-oxide fuel cell stacks10.1002/fuce.201700012 ↗
38. 3D printing of fuel cells and electrolyzers
39. 3D printing the next generation of enhanced solid oxide fuel and electrolysis cells10.1039/D0TA02803G ↗
40. 3D printed electrolyte-supported solid oxide cells based on Ytterbium-doped scandia-stabilized zirconia
41. High temperature electrolyte supported Ni-GDC/YSZ/LSM SOFC operation on two-stage viking gasifier product gas10.1016/j.jpowsour.2007.04.073 ↗
42. Effect of scaling-up on the performance and degradation of long-term operated electrolyte supported solid oxide cell, stack and module in electrolysis mode
43. Mechanical and electrochemical behavior of novel electrolytes based on partially stabilized zirconia for solid oxide fuel cells10.1016/j.ceramint.2015.03.104 ↗
44. Highly flexible solid oxide fuel cells using phase-controlled electrolyte support10.1016/j.jeurceramsoc.2022.06.046 ↗
45. 3D printing of reversible solid oxide cell stacks for efficient hydrogen production and power generation10.1016/j.jpowsour.2024.234704 ↗
46. A novel fabrication of yttria-stabilized-zirconia dense electrolyte for solid oxide fuel cells by 3D printing technique10.1016/j.ijhydene.2019.01.071 ↗
47. 3D printing of robust 8YSZ electrolytes with a hyperfine structure for solid oxide fuel cells10.1021/acsaem.2c03707 ↗
48. Electrolyte-supported solid oxide fuel cells with ultra-thin honeycomb structure prepared by digital light processing 3D printing technology10.1016/j.ceramint.2023.11.074 ↗
49. Production of high conductivity composite zirconia solid oxide electrolytes with good mechanical strength through net-shape10.1039/b811486b ↗
50. Preparation of Ni/YSZ anode material using gel-tape casting and performance analysis
51. High-performance oxygen electrode Ce0.9Co0.1O2-δ-LSM-YSZ for hydrogen production by solid oxide electrolysis cells10.1016/j.ijhydene.2021.05.072 ↗
52. Water-based tape-casting of SOFC composite 3YSZ/8YSZ electrolytes and ionic conductivity of their pellets10.1016/j.ceramint.2011.07.014 ↗
53. Microstructural characterization of SOFC Ni-YSZ anode composites by low-voltage scanning electron microscopy10.1016/j.ssi.2007.12.075 ↗
54. Electrical conductivity of Ni-YSZ composites: degradation due to Ni particle growth10.1016/j.ssi.2011.02.001 ↗
55. Electrochemical open circuit voltage (OCV) characterization of SOFC materials10.1007/s11581-013-0843-z ↗
56. High‐temperature steam electrolysis
57. Solid oxide electrolysis cells – current material development and industrial application10.1039/D3TA02161K ↗
58. Review of solid oxide electrolysis cells: a clean energy strategy for hydrogen generation10.1680/jnaen.18.00009 ↗
59. 80,000 current on/off cycles in a one year long steam electrolysis test with a solid oxide cell10.1016/j.ijhydene.2019.05.124 ↗
60. Development of electrolyte supported cells based on a thin 3YSZ substrate: through optimized contact layer to high power density10.1149/MA2015-03/1/125 ↗
61. Novel electrolytes for solid oxide fuel cells with improved mechanical properties10.1016/j.ijhydene.2012.06.103 ↗