Transient electrochemical response of magnetron-sputtered IrOx anode under dynamic power profiles
Source abstract
Abstract
This study investigates the anodic polarization behavior of a magnetron-sputtered IrO x anode during water electrolysis and its impact on process efficiency. Transient responses were analyzed under pulsed potential signals of different waveforms (square, triangular, and sinusoidal), with amplitudes ranging from 100 to 500 mV and frequencies between 100 mHz and 1 Hz. The results show that pulsed operation improves reaction efficiency and operational stability. While pulsed excitation alters electrical double layer (EDL) dynamics and can enhance short-term current output, the “from wall to hydrogen” analysis reveals that direct current (DC) operation provides the lowest specific energy consumption and cost per kilogram of hydrogen, making it the most energy-efficient regime. Among the pulsed conditions, square wave signals at 500 mV and 1 Hz with duty cycles of 50-80% offer the most favorable compromise, delivering higher hydrogen production rates with only marginal efficiency penalties. An 80% duty cycle (DCy) square wave results in the lowest energy consumption among all pulsed modes, while the 50% DCy mode maximizes hydrogen throughput. These results demonstrate that optimizing the temporal structure of the applied potential enables tuning between efficiency-driven and productivity driven operation, providing a flexible operational strategy for electrolysis systems under dynamically modulated electrical inputs.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced battery technologies research · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Toward optimal operations of long-lifetime PEM electrolysis: degradation mechanisms, modeling, diagnostics, and control10.1016/j.ijhydene.2025.152297 ↗
2. Efficiency improvement by pulsed water electrolysis: an unjustified hope10.1016/j.ijhydene.2025.02.348 ↗
3. Transient behaviors and mathematical model of proton exchange membrane electrolyzer10.1016/j.jpowsour.2022.231757 ↗
4. Mechanism of hydrogen bubble behavior at different reaction stages of high-current PEMWE during pulsed dynamic electrolysis
5. T. Mutafchiev, Applied Electrochemistry, State Publishing House “Technika“, Sofia, n.d. .
6. Nenov · 1989
7. Application of high-frequency pulsed electrolysis technology in enhancing hydrogen production efficiency and energy saving potential analysis10.1016/j.ijhydene.2025.02.158 ↗
8. Increasing the efficiency of water electrolysis with the application of pulsing electric fields10.1016/j.rser.2025.115584 ↗
9. Sputtered iridium oxide films as charge injection material for functional electrostimulation10.1149/1.1747881 ↗
10. ParaCell electrochemical cell kit with polycarbonate End-Cap-s gamry instruments , (n.d.). https://www.gamry.com/cells-and-accessories/electrochemical-cells/paracell-kit-polycarbonate-ends/(accessed January 16, 2026).
11. Superimposed pulse-controlled electrolysis for optimal hydrogen evolution using Mn/MnSO4 redox pair10.1016/j.ijhydene.2025.06.202 ↗
12. Effect of a ripple current on the efficiency of a PEM electrolyser10.1016/j.rineng.2021.100216 ↗
13. First pulsed control system design for enhanced hydrogen production performance in proton exchange membrane water electrolyzers10.1016/j.fuel.2024.132027 ↗
14. Potentiostat/Galvanostat Electrochemical Instrument Basics Gamry Instruments, (n.d). https://www.gamry.com/application-notes/instrumentation/potentiostat-fundamentals/(accessed April 14, 2025)..
15. Sputtered iridium oxide films as electrocatalysts for water splitting via PEM electrolysis10.1016/j.electacta.2006.11.005 ↗
16. X-ray absorption in relation to valency of iridium in sputtered iridium oxide films10.1016/S0022-0728(99)00058-3 ↗
17. Structure and reactivity of IrOx nanoparticles for the oxygen evolution reaction in electrocatalysis: an electronic structure theory study10.1021/acs.jpcc.0c10092 ↗
18. B. Conway, Electrochemical Supercapacitors Scientific Fundamentals and Technological Applications, 1st-st ed., Springer New York, NY, n.d. https://doi.org/https://doi.org/10.1007/978-1-4757-3058-6..
19. Self-supported amorphous iridium oxide catalysts for highly efficient and durable oxygen evolution reaction in acidic media10.1016/j.electacta.2021.138955 ↗
20. Understanding the role of functional groups in polymeric binder for electrochemical carbon dioxide reduction on gold nanoparticles10.1002/adfm.201804762 ↗
21. Electrical double layer mechanism analysis of PEM water electrolysis for frequency limitation of pulsed currents10.3390/en14227822 ↗
22. Parameter identification of electrical equivalent circuits including mass transfer parameters for the selection of the operating frequencies of pulsed PEM water electrolysis10.3390/en15249303 ↗
23. Experimental study of wave shape and frequency of the power supply on the energy efficiency of hydrogen production by water electrolysis
24. Review of the dynamic response of water electrolyzer10.1007/s00202-025-03042-6 ↗
25. Discriminating between the effect of pulse width and duty cycle on the hydrogen generation performance of 3-D electrodes during pulsed water electrolysis10.1016/j.ijhydene.2020.11.232 ↗
26. Impact of the current fluctuation on the efficiency of alkaline water electrolysis10.1016/j.ijhydene.2016.11.142 ↗
27. Proton exchange membrane electrolyzer emulator for power electronics testing applications10.3390/pr9030498 ↗
28. A semiempirical study of the temperature dependence of the anode charge transfer coefficient of a 6kW PEM electrolyzer10.1016/j.ijhydene.2008.06.006 ↗
29. Dynamic emulation of a PEM electrolyzer by time constant based exponential model10.3390/en12040750 ↗
30. Deconvoluting charge-transfer, mass transfer, and ohmic resistances in phosphonic acid–sulfonic acid ionomer binders used in electrochemical hydrogen pumps10.1039/D3EE01776A ↗
31. Discovering reactant supply pathways at Electrode/PEM reaction interfaces via a tailored interface‐visible characterization cell
32. Influence of the porous transport layer properties on the mass and charge transfer in a segmented PEM electrolyzer10.1016/j.ijhydene.2020.01.100 ↗
33. Combination effect of flow channel configuration and anode GDL porosity on mass transfer and performance of PEM water electrolyzers10.1039/D2SE00974A ↗
34. How to create sine waves from square waves and RC filters, Mbedded.Ninja (n.d.). https://blog.mbedded.ninja/electronics/circuit-design/how-to-create-sine-waves-from-square-waves-and-rc-filters/(accessed January 15, 2026).
35. Bubble dynamic behaviors in the anode porous transport layer of proton exchange membrane electrolyzers using a microfluidic reactor10.1016/j.jpowsour.2023.233532 ↗
36. Lattice boltzmann method to study the water-oxygen distributions in porous transport layer (PTL) of polymer electrolyte membrane (PEM) electrolyser10.1016/j.ijhydene.2021.04.112 ↗
37. Degradation study of a proton exchange membrane water electrolyzer under dynamic operation conditions10.1016/j.apenergy.2020.115911 ↗