journal article·2026-07Open access

Unravelling fast-charging degradation in NMC/Gr pouch cells: Lithium plating and SEI properties

Mei Luo, Xiang Gao, Caleb A. Calvary, Andrew N. Jansen, Zhenzhen Yang, Yuzi Liu, Jun Xu, Qingliu Wu, Wenquan Lu

Abstract

As fast-charging technology expands across the electric vehicle and emerging energy-storage applications, understanding its impact on battery performance and longevity is critical. In this study, 1.8 Ah LiNi 0.6 Mn 0.2 Co 0.2 O 2 /graphite pouch cells were charged at various charging rates (0.5C, 2C, 4C, and 6C) to investigate the degradation mechanisms. Our results showed that well-designed NMC/Gr pouch cells could reach over 1000 cycles with a 2C charging rate, while only reaching around 500 cycles with 4C and 6C charging rates. Fast-charging effects on NMC and graphite electrodes were obtained through a series of post-mortem characterizations, including electrochemical impedance spectroscopy (EIS), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM) with energy-dispersive X-ray spectroscopy (EDS). Although higher charging rates cause pulverization of NMC secondary particles, the dominant degradation mechanism driving the fading of fast-charging-related performance lies in the graphite anode, where lithium plating and LiF-rich solid electrolyte interphase (SEI) formation result in Li inventory loss and impedance growth. The postmortem results suggest that the formation of a LiF-rich SEI, which exacerbates anode impedance and some irreversible Li + ion loss, is likely driven by the substantial decomposition of PF 6 − during fast charging, an effect often overlooked in smaller laboratory-scale studies. Cycle life (left) and SEI properties (right) under different charging rates. • NMC/graphite pouch cells sustain >1000 cycles at 2C but <500 at ≥4C. • Fast charging accelerates lithium inventory loss and anode impedance growth. • Li plating and LiF-rich SEI at anode dominate fast-charge degradation. • LiF-rich SEI formation on graphite is strongly rate dependent. • Pouch-cell results reveal mechanisms often overlooked in coin-cell studies.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Memory and Neural Computing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. 2018
2. Extreme Fast Charge | Argonne National Laboratory, (n.d.). https://www.anl.gov/access/research/projects/extreme-fast-charge (accessed July 11, 2024).
3. Lithium-ion battery fast charging: a review10.1016/j.etran.2019.100011 ↗
4. Study on Li-ion battery fast charging strategies: review, challenges and proposed charging framework10.1016/j.est.2022.105507 ↗
5. A “Master Curve” describing reaction inhomogeneity and plating onset during fast-charging of graphite electrodes10.1149/1945-7111/acd963 ↗
6. Fast charging of Li-ion cells: effect of separator membranes and mapping of “safe lines” to avoid Li plating10.1016/j.jpowsour.2022.232086 ↗
7. Enhanced fast charging and reduced lithium-plating by laser-structured anodes for lithium-ion batteries10.1149/2.1241915jes ↗
8. Investigation of lithium plating-stripping process in Li-Ion batteries at low temperature using an electrochemical model10.1149/2.0661810jes ↗
9. Lithium plating mechanism, detection, and mitigation in lithium-ion batteries10.1016/j.pecs.2021.100953 ↗
10. Modeling of lithium plating and lithium stripping in lithium-ion batteries10.1016/j.jpowsour.2018.12.084 ↗
11. Interplay of intercalation dynamics and lithium plating in monolithic and architectured graphite anodes during fast charging10.1039/D4EE02211D ↗
12. Understanding particle size effect on fast-charging behavior of graphite anode using ultra-thin-layer electrodes10.1016/j.est.2024.114521 ↗
13. Decoupling the failure mechanism of 360 Wh kg−1 lithium-ion pouch cell during overcharging
14. Unveiling capacity degradation mechanism of Li-ion battery in fast-charging process10.1002/celc.201902050 ↗
15. Degradation identification of LiNi0.8Co0.1Mn0.1O2/graphite lithium-ion batteries under fast charging conditions10.1016/j.electacta.2021.138979 ↗
16. Investigation on lithium-ion battery degradation induced by combined effect of current rate and operating temperature during fast charging10.1016/j.est.2022.104811 ↗
17. Challenges and opportunities toward fast-charging of lithium-ion batteries10.1016/j.est.2020.101837 ↗
18. A review on the key issues of the lithium ion battery degradation among the whole life cycle10.1016/j.etran.2019.100005 ↗
19. Effect of fast charging on degradation and safety characteristics of lithium-ion batteries with LiNixCoyMnzAl1-x-y-zO2 cathodes10.1016/j.cej.2024.152181 ↗
20. Multiscale correlative imaging reveals sequential and heterogeneous degradations in fast-charging batteries10.1039/D4EE01497A ↗
21. Application of a lithium–tin reference electrode to determine electrode contributions to impedance rise in high-power lithium-ion cells10.1016/j.electacta.2004.05.040 ↗
22. Performance of high-power lithium-ion cells under pulse discharge and charge conditions10.1002/er.1665 ↗
23. Examining Effects of Negative to Positive Capacity Ratio in Three-Electrode Lithium-Ion Cells with Layered Oxide Cathode and Si Anode10.1021/acsaem.2c00665 ↗
24. Chemomechanical interplay of layered cathode materials undergoing fast charging in lithium batteries10.1016/j.nanoen.2018.09.051 ↗
25. Insight into structural degradation of NCMs under extreme fast charging process10.1007/s12598-023-02454-2 ↗
26. Understanding the insight mechanism of chemical-mechanical degradation of layered Co-Free Ni-Rich cathode materials: a review
27. Nanostructured Co-Free layered oxide cathode that affords fast-charging lithium-ion batteries for electric vehicles10.1002/aenm.202202719 ↗
28. Generation and evolution of the solid electrolyte interphase of lithium-ion batteries10.1016/j.joule.2019.08.018 ↗
29. In situ raman spectroscopy on Silicon Nanowire Anodes integrated in lithium ion batteries10.1149/2.0541903jes ↗
30. The vibration spectrum of lithium fluoride and the evaluation of its specific heat10.1007/BF03045831 ↗
31. Transition metal dissolution, ion migration, electrocatalytic reduction and capacity loss in lithium-ion full cells10.1149/2.1111702jes ↗
32. Lithium plating detection using dynamic electrochemical impedance spectroscopy in lithium-ion batteries10.1016/j.jpowsour.2021.230508 ↗
33. A comparative study of synthetic graphite and Li electrodes in electrolyte solutions based on ethylene Carbonate‐Dimethyl Carbonate Mixtures10.1149/1.1837300 ↗
34. Hydrolysis in the system LiPF6—propylene carbonate—dimethyl carbonate—H2O10.1016/j.jfluchem.2004.09.027 ↗
35. Chemical reactivity of PF5 and LiPF6 in ethylene carbonate/dimethyl carbonate solutions10.1149/1.1353158 ↗
36. Insight into SEI growth in Li-Ion batteries using molecular dynamics and accelerated chemical reactions10.1021/acs.jpcc.1c04149 ↗
37. Enabling fast charging – battery thermal considerations10.1016/j.jpowsour.2017.07.009 ↗
38. Modeling the effect of two-stage fast charging protocol on thermal behavior and charging energy efficiency of lithium-ion batteries10.1016/j.est.2018.09.004 ↗
39. Molecular engineering of weak intermolecular interactions for regulating solvation and interface in cyclic ether electrolytes enabling robust lithium metal batteries10.1016/j.nanoen.2026.111744 ↗