journal article·2026-07Open access

Impact of series-connected stacks on shunt currents in an industrial-scale alkaline water electrolyser system

Galdi Hysa, Tuomas Anttilainen, Vesa Ruuskanen, Santeri Pöyhönen, Antti Kosonen, Markku Niemelä, Pertti Kauranen, Jero Ahola

Abstract

Green hydrogen, produced through water electrolysers powered by renewable energy, is becoming a key element in decarbonizing future energy systems. Scaling-up alkaline water electrolyser (AWE) stacks by adding series-connected cells, and increasing the operating voltage (1000 V–1500 V) can reduce the capital cost of electrolyser system and improve the energy efficiency of AC–DC power converters. However, scaling-up AWE stacks is limited by shunt currents. Therefore, series connection of multiple substacks is considered a promising approach to improve scalability, elevate voltage level, and mitigate shunt currents of the electrolyser. This study focuses on developing the equivalent circuit model of series-connected substack system, consisting of isolated electrolyte circulation, and shared electrolyte circulation. Single-stack model, verified with measurement data from an industrial AWE, served as foundation for this research. Both configurations of AWE substack system are compared in terms of shunt currents and specific energy consumption. Additionally, this research investigates the impact of number of series-connected substacks and various lengths of external-ports on shunt currents in the AWE. Dividing a long electrolyser stack into shorter substacks significantly decreases shunt currents. Successful implementation of series-connected substacks requires careful consideration of current efficiency, pressure drop in the electrolyte circulation, and capital cost of the AWE system. • Series-connected AWE stacks with isolated and shared electrolyte circuit are studied. • Modeling of series-connected substacks is developed using a resistive network. • Dividing an AWE stack into series-connected substacks improves current efficiency. • External shunt currents can be reduced by increasing the length of external-ports.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Hybrid Renewable Energy Systems · Electrocatalysts for Energy Conversion · Advancements in Solid Oxide Fuel Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Hydrogen energy — Abundant, efficient, clean: A debate over the energy-system-of-change10.1016/j.ijhydene.2009.05.063 ↗
2. Advances in alkaline water electrolyzers: A review10.1016/j.est.2019.03.001 ↗
3. AC-DC converters for electrolyzer applications: State of the art and future challenges10.3390/electronics9060912 ↗
4. An overview of water electrolysis technologies for green hydrogen production10.1016/j.egyr.2022.10.127 ↗
5. Experimental evaluation of dynamic operating concepts for alkaline water electrolyzers powered by renewable energy10.1016/j.electacta.2021.139715 ↗
6. Influence of operation parameters in the modeling of alkaline water electrolyzers for hydrogen production10.1016/j.ijhydene.2014.07.001 ↗
7. Static–dynamic modelling of the electrical behaviour of a commercial advanced alkaline water electrolyser10.1016/j.ijhydene.2012.09.125 ↗
8. Current status of water electrolysis for energy storage, grid balancing and sector coupling via power-to-gas and power-to-liquids: A review10.1016/j.rser.2017.09.003 ↗
9. Dynamic operation of water electrolyzers: A review for applications in photovoltaic systems integration10.1016/j.rser.2023.113407 ↗
10. Exploration of the configuration and operation rule of the multi-electrolyzers hybrid system of large-scale alkaline water hydrogen production system10.1016/j.apenergy.2022.120413 ↗
11. Optimization of hydrogen production in multi-Electrolyzer systems: A novel control strategy for enhanced renewable energy utilization and Electrolyzer lifespan10.1016/j.apenergy.2024.124299 ↗
12. Green hydrogen cost reduction: Scaling up electrolysers to meet the 1.5C climate goal
13. Cost forecast for low-temperature electrolysis - technology driven bottom-up prognosis for PEM and alkaline water electrolysis systems
14. Present and future cost of alkaline and PEM electrolyser stacks10.1016/j.ijhydene.2023.05.031 ↗
15. Size design strategy for scaling up alkaline water electrolysis stack integrated with renewable energy source: A multiphysics modeling approach10.1016/j.enconman.2023.117955 ↗
16. Channel design optimization of alkaline electrolysis stacks considering the trade-off between current efficiency and pressure drop10.1016/j.jpowsour.2023.233222 ↗
17. Overview of power electronic converter topologies enabling large-scale hydrogen production via water electrolysis10.3390/app12041906 ↗
18. Modelling and study of shunt currents in an industrial alkaline water electrolyser with various number of cells in series10.1049/rpg2.70112 ↗
19. Design considerations for industrial water electrolyzer plants10.1016/j.ijhydene.2021.09.018 ↗
20. Effect of leakage currents on the primary current distribution in bipolar electrochemical reactors10.1007/s10800-007-9324-2 ↗
21. Experimental and modeling study on energy flow of 250 kW alkaline water electrolysis system under steady state conditions and cold start process10.1016/j.fuel.2023.128799 ↗
22. Compact and general strategy for solving current and potential distribution in electrochemical cells composed of massive monopolar and bipolar electrodes10.1149/2.0471711jes ↗
23. Prediction of shunt currents in a bipolar electrolyzer stack by difference calculus10.1007/s10800-007-9330-4 ↗
24. (Invited) shunt-currents in alkaline water-electrolyzers and renewable energy10.1149/11309.0025ecst ↗
25. Analysis of shunt currents and associated corrosion of bipolar plates in PEM fuel cells10.1016/j.jelechem.2014.09.009 ↗
26. The relationship between shunt currents and edge corrosion in flow batteries10.1149/2.0081711jes ↗
27. Model based examination on influence of stack series connection and pipe diameters on efficiency of vanadium redox flow batteries under consideration of shunt currents10.1016/j.jpowsour.2015.01.119 ↗
28. Design trade-offs among shunt current, pumping loss and compactness in the piping system of a multi-stack vanadium flow battery10.1016/j.jpowsour.2015.06.138 ↗
29. Experimental determination and calculation of parasitic currents in bipolar electrolyzers with application to chlorate electrolyzer10.1149/1.2401878 ↗
30. Predicting shunt currents in stacks of bipolar plate cells10.1149/1.2108606 ↗
31. Current losses in a bipolar cell - II: An analysis of the Butler-Volmer regime10.1016/S0013-4686(98)00002-4 ↗
32. Sensitivity analysis of the process conditions affecting the shunt currents and the SEC in an industrial-scale alkaline water electrolyzer plant10.1016/j.apenergy.2024.122732 ↗
33. Ströder · 2016
34. Jensen · 2016
35. Serial connection of 48-cell alkaline electrolysis stacks10.1016/j.jpowsour.2025.238382 ↗
36. A review of specific conductivities of potassium hydroxide solutions for various concentrations and temperatures10.1016/j.ijhydene.2006.10.062 ↗
37. Modeling of advanced alkaline electrolyzers: a system simulation approach10.1016/S0360-3199(02)00033-2 ↗
38. Modelling and simulation of an alkaline electrolyser cell10.1016/j.energy.2017.07.053 ↗
39. Comparison of thyristor-rectifier with hybrid filter and chopper- rectifier for high-power, high-current application
40. High-current variable-voltage rectifiers: state of the art topologies10.1049/iet-pel.2014.0533 ↗
41. Modelling of large-sized electrolysers for real-time simulation and study of the possibility of frequency support by electrolysers10.1049/iet-gtd.2019.1364 ↗
42. Power quality estimation of water electrolyzers based on current and voltage measurements10.1016/j.jpowsour.2019.227603 ↗