journal article·2026-07Open access

CeOx enhanced electrochemical performance of LiNi0.80Mn0.1Co0.1O2 cathode active material for Li-ion batteries

Basit Ali, Sami Vasala, Mattia Colalongo, Moritz Karl Rosenthal, Anna Kobets, Lide Yao, Hau Jiang, Timo Kankaanpää, Pieter Glatzel, Tanja Kallio

Abstract

Nickel-rich layered oxides, such as LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NMC811), are considered as an attractive cathode active material (CAM) due to their high power and high energy density. However, NMC811 CAM faces severe challenges, such as structural instability and high surface reactivity at high voltages. To overcome these challenges, cerium doping by solid-state synthesis route and CeO x coatings by atomic layer deposition (ALD) technique not only stabilize the NMC811 structure but also provide a safe protective layer on the electrode surface. The optimized electrochemical performance achieved by incorporating cerium into the NMC811 structure enhances cycling stability at the voltage range of 3.0 - 4.4 V in Li half-cells, as confirmed by X-ray absorption spectroscopy (XAS), indicating a cerium oxidation state of +4. Likewise, CeO x coatings (∼1 nm) by ALD technique enhances the rate performance and cycling stability at high voltages (3.0 - 4.6 V) in Li half cells due to the formation of Ce 3+ on the surface of NMC811 electrodes, confirmed by XAS analysis. Overall, doping and coating demonstrate that cerium is effective in both strategies, especially the ALD technique helps to reduce metal dissolution, better cycling stability and achieve high voltage operations. This work highlights the role of cerium incorporated by doping and coatings on the surface in order to stabilize the NMC811 structure and suppress the parasitic reactions that occur at high voltages to utilize the full capacity.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Extraction and Separation Processes · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. An overview of global power lithium-ion batteries and associated critical metal recycling10.1016/j.jhazmat.2021.127900 ↗
2. Prospect and reality of Ni‐rich cathode for commercialization
3. High‐capacity cathode material with high voltage for Li‐ion batteries10.1002/adma.201705575 ↗
4. Understanding the degradation mechanism of lithium nickel oxide cathodes for Li-ion batteries10.1021/acsami.6b11111 ↗
5. High-energy cathode material for long-life and safe lithium batteries10.1038/nmat2418 ↗
6. High-thermal-and air-stability cathode material with concentration-gradient buffer for Li-ion batteries10.1021/acsami.7b14684 ↗
7. A new coating method for alleviating surface degradation of LiNi0. 6Co0. 2Mn0. 2O2 cathode material: nanoscale surface treatment of primary particles10.1021/acs.nanolett.5b00045 ↗
8. Recent advances and remaining challenges for lithium ion battery cathodes
9. Review and prospect of layered lithium nickel manganese oxide as cathode materials for Li-ion batteries10.1007/s10008-012-1977-z ↗
10. High rate micron-sized niobium-doped LiMn1. 5Ni0. 5O4 as ultra high power positive-electrode material for lithium-ion batteries10.1016/j.jpowsour.2012.03.095 ↗
11. Suppressing surface lattice oxygen release of Li‐rich cathode materials via heterostructured spinel Li4Mn5O12 coating
12. Characterization of multiple metals (Cr, Mg) substituted LiNi0. 8Co0. 1Mn0. 1O2 cathode materials for lithium ion battery10.1016/j.jallcom.2012.01.004 ↗
13. Decreasing Li/Ni disorder and improving the electrochemical performances of Ni-rich LiNi0. 8Co0. 1Mn0. 1O2 by Ca doping10.1021/acs.inorgchem.7b01035 ↗
14. Extending the battery life using an Al-doped Li [Ni0. 76Co0. 09Mn0. 15] O2 cathode with concentration gradients for lithium ion batteries10.1021/acsenergylett.7b00613 ↗
15. Stabilizing nickel-rich layered cathode materials by a high-charge cation doping strategy: zirconium-doped LiNi 0.6 Co 0.2 Mn 0.2 O 210.1039/C6TA06740A ↗
16. Structural and electrochemical aspects of LiNi0. 8Co0. 1Mn0. 1O2 cathode materials doped by various cations10.1021/acsenergylett.8b02302 ↗
17. Role of surface coating on cathode materials for lithium-ion batteries10.1039/c0jm00154f ↗
18. A stable lithium-rich surface structure for lithium-rich layered cathode materials10.1038/ncomms13598 ↗
19. Cathode materials modified by surface coating for lithium ion batteries10.1016/j.electacta.2005.11.015 ↗
20. Electrochemical properties of polyaniline-coated li-rich nickel manganese oxide and role of polyaniline coating layer
21. Polyol synthesis of platinum nanostructures: control of morphology through the manipulation of reduction kinetics10.1002/anie.200462668 ↗
22. Improvement of the high-temperature, high-voltage cycling performance of LiNi0. 5Co0. 2Mn0. 3O2 cathode with TiO2 coating10.1016/j.jallcom.2012.07.074 ↗
23. The role of AlF3 coatings in improving electrochemical cycling of Li‐enriched nickel‐manganese oxide electrodes for Li‐ion batteries10.1002/adma.201104106 ↗
24. Atomic layer deposition chemistry: recent developments and future challenges10.1002/anie.200301652 ↗
25. Electron localization determines defect formation on ceria substrates10.1126/science.1111568 ↗
26. Stability of the Ce 3+ valence state in cerium oxide nanoparticle layers10.1039/c2nr30406f ↗
27. Design of electroceramics for solid oxides fuel cell applications: playing with ceria10.1111/j.1551-2916.2008.02347.x ↗
28. Preparation and methanol oxidation catalysis of Pt-CeO2 electrode10.1016/j.jelechem.2005.04.002 ↗
29. The utilization of ceria in industrial catalysis10.1016/S0920-5861(98)00515-X ↗
30. Monodisperse CeO2 nanoparticles and their oxygen storage and release properties10.1021/jp109878j ↗
31. Temperature quenching of yellow Ce3+ luminescence in YAG: ce10.1021/cm8030768 ↗
32. Ceria in automotive exhaust catalysts: I. Oxygen storage10.1016/0021-9517(84)90371-3 ↗
33. Studies on cerium (Ce4+/Ce3+)–vanadium (V2+/V3+) redox flow cell—cyclic voltammogram response of Ce4+/Ce3+ redox couple in H2SO4 solution10.1016/j.jpowsour.2003.12.017 ↗
34. Redox potentials and kinetics of the Ce3+/Ce4+ redox reaction and solubility of cerium sulfates in sulfuric acid solutions10.1016/S0378-7753(02)00109-X ↗
35. A novel double modification to enhance electrochemical performance of LiNi0. 5Co0. 2Mn0. 3O2 by substituting Ce for Co site10.1016/j.electacta.2021.138904 ↗
36. Improving the electrochemical performance of LiNi0. 7Mn0. 3O2 cathode material by CeO2 coating via Ce doping10.1016/j.ssi.2023.116296 ↗
37. Cerium-doped lithium-rich Li1. 2Mn0. 56Ni0. 11Co0. 13O2 as cathode with high performance for lithium-ion batteries10.1007/s11581-022-04709-x ↗
38. High potential performance of Cerium-doped LiNi0. 5Co0. 2Mn0. 3O2 cathode material for Li-ion battery10.1007/s10853-015-8856-9 ↗
39. Improving performance of cathode NMC-811 by CeO2-coating for Li-ion battery10.1016/j.mee.2024.112169 ↗
40. Nanocoating of Ce-tannic acid metal-organic coordination complex: surface modification of layered Li1. 2Mn0. 6Ni0. 2O2 by CeO2 coating for lithium-ion batteries10.1007/s11581-018-2823-9 ↗
41. Boosting the electrochemical performance of Li1. 2Mn0. 54Ni0. 13Co0. 13O2 by atomic layer-deposited CeO2 coating10.1021/acsomega.7b01922 ↗
42. Enhancing the electrochemical performance of nickel‐rich layered cathode material (NMC 622) for lithium‐ion batteries by ultrathin conductive ceria‐surface coating10.1002/ejic.202400689 ↗
43. Comprehensive study of Zr-Doped Ni-Rich cathode materials upon lithiation and Co-Precipitation synthesis steps10.1021/acsami.4c05058 ↗
44. Li–Nb–O coating/substitution enhances the electrochemical performance of the LiNi0. 8Mn0. 1Co0. 1O2 (NMC 811) cathode10.1021/acsami.9b09696 ↗
45. Electrochemical kinetics and cycle stability improvement with Nb doping for lithium-rich layered oxides10.1021/acsaem.8b01534 ↗
46. Hierarchical nickel valence gradient stabilizes high-nickel content layered cathode materials10.1038/s41467-021-22635-w ↗
47. Direct recycling of lithium-ion cathode: a green solution (applied to laptop batteries)10.1149/1945-7111/acef5d ↗
48. Sustainable manufacturing of graphitic carbon from bio‐waste using flash heating for anode material of lithium‐ion batteries with optimal performance
49. LT-LiNi1/3Mn1/3Co1/3O2: a partially-disordered, composite rock salt cathode prepared by flame spray pyrolysis for Li-Ion batteries10.1149/1945-7111/acd02e ↗
50. Chronic dosing of a simulated pond ecosystem in indoor aquatic mesocosms: fate and transport of CeO 2 nanoparticles10.1039/C5EN00092K ↗
51. Unveiling the cerium (III)/(IV) structures and charge-transfer mechanism in sulfuric acid10.1021/jacsau.2c00484 ↗
52. Insights of peculiar green-yellow emission occurrence in Ce3+-Doped barium yttrium orthogermanate phosphors10.1021/acs.inorgchem.3c01121 ↗
53. Cerium doping‐induced enrichment of Ni3S4 phase for boosting oxygen evolution reaction10.1002/cssc.202400056 ↗
54. Nickel hydroxides and related materials: a review of their structures, synthesis and properties10.1098/rspa.2014.0792 ↗
55. Interpretation of the Ni K-edge EXAFS in nanocrystalline nickel oxide using molecular dynamics simulations10.1016/j.jnoncrysol.2011.02.030 ↗
56. X-ray absorption investigation of local structural disorder in Ni1-xFex (x= 0.10, 0.20, 0.35, and 0.50) alloys10.1063/1.4982705 ↗
57. Mn K-edge X-ray absorption studies of oxo-and hydroxo-manganese (IV) complexes: experimental and theoretical insights into pre-edge properties10.1021/ic5006902 ↗
58. Investigation of Co nanoparticles with EXAFS and XANES10.1016/j.cplett.2004.10.095 ↗
59. Structural investigations of Co/ZrO2 discontinuous multilayers by x-ray absorption fine structure spectroscopy10.1088/0953-8984/15/43/008 ↗
60. Extended X-ray absorption fine structure (EXAFS) analysis of disorder and multiple-scattering in complex crystalline solids10.1021/ja00086a026 ↗
61. Enhanced cyclability of lithium-ion batteries resulting from atomic layer deposition of Al2O3 on LiFePO4 electrodes
62. Direct integration of strained‐Pt catalysts into proton‐exchange‐membrane fuel cells with atomic layer deposition
63. Design and characterization of ALD-based overcoats for supported metal nanoparticle catalysts10.1021/acscatal.0c05099 ↗
64. Atomic layer deposition of CeO2/HfO2 gate dielectrics on Ge substrate10.1016/j.apsusc.2014.10.025 ↗
65. EXPGUI, a graphical user interface for GSAS10.1107/S0021889801002242 ↗
66. ATHENA, ARTEMIS, HEPHAESTUS: data analysis for X-ray absorption spectroscopy using IFEFFIT10.1107/S0909049505012719 ↗