Rapid impedance-based durability screening of porous transport layer coatings for PEM water electrolyzers
Source abstract
Abstract
Anodes of proton exchange membrane water electrolyzers (PEMWEs) operate under strongly oxidizing conditions, imposing stringent durability requirements on porous transport layers (PTLs). Although metallic coatings are widely used to mitigate titanium passivation and interfacial resistance growth, their stability is typically assessed using disparate, material-specific protocols that limit cross-comparison and standardization. This methodological gap hinders the development of cost-effective alternatives to platinum group metal (PGM) coatings. Here, we introduce a rapid electrochemical method to evaluate PTL coating durability under PEMWE-relevant conditions. The approach employs time-resolved impedance spectroscopy during sustained anodic polarization, focusing on the evolution of low-frequency resistance (LFR) and phase behavior. A central outcome is the definition of a dimensionless Passivation Index (PI), derived from the temporal evolution of LFR, enabling quantitative comparison of degradation kinetics independent of geometric surface area. Using uncoated and Pt-, Au-, and Nb-coated titanium PTLs as model systems, we show that LFR sensitively captures interfacial transport limitations associated with passivation, while inductive impedance features provide diagnostic of active corrosion and coating instability. This method enables rapid discrimination between stable, passivating, and actively corroding interfaces without reliance on material-specific equivalent circuit models or full-cell testing, offering a pathway toward standardized durability screening of electrolyzer materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Hybrid Renewable Energy Systems · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Proton Exchange Membrane (PEM) Water Electrolysis: Cell-level considerations for gigawatt-scale deployment |10.1021/acs.chemrev.3c00904 ↗
2. Renewable hydrogen production: a techno-economic comparison of photoelectrochemical cells and photovoltaic-electrolysis10.1016/j.ijhydene.2020.06.092 ↗
3. Anion-exchange-membrane electrolysis with alkali-free water feed10.1021/acs.chemrev.4c00466 ↗
4. Critical review—identifying critical gaps for polymer electrolyte water electrolysis development10.1149/2.1441704jes ↗
5. Dynamic electrical degradation of PEM electrolyzers under renewable energy intermittency: mechanisms, diagnostics, and mitigation strategies – a comprehensive review10.1016/j.rser.2025.116170 ↗
6. Analysis of voltage losses in PEM water electrolyzers with low platinum group metal loadings10.1149/2.0641805jes ↗
7. Efficient and stable proton exchange membrane water electrolysis enabled by stress optimization
8. Porous transport layers for proton exchange membrane electrolysis under extreme conditions of current density, temperature, and pressure - stiber
9. Unveiling the failure mechanism of Pt coating on Ti porous transport layer in simulated PEMEC environment10.1021/acsami.5c08467 ↗
10. A Review of the Porous Transport Layer in Polymer Electrolyte Membrane Water Electrolysis - Doan - 2021 - International Journal of Energy Research - Wiley Online Library, (n.d.)..
11. Degradation of PGM and PGM-free coatings on PEMWE porous transport layers10.1021/acsami.4c22455 ↗
12. Materials engineering for high performance and durability proton exchange membrane water electrolyzers10.1021/acsaem.5c01989 ↗
13. Finger · 2025
14. Achieving high performance and durability with ultra-low precious metal nanolayer on porous transport layer for PEMWE application10.1016/j.jpowsour.2024.236088 ↗
15. Optimized tantalum interlayer thickness for PTLs: enhancing PEMWE performance, stability, and reducing precious metal loading10.1016/j.jpowsour.2025.237360 ↗
16. Advances in anode porous transport layer: structural design and coating strategy for efficient proton exchange membrane water electrolyzer10.1007/s11814-025-00455-8 ↗
17. Exploring the engineered electroplating process for coating of gold on the inner structure of porous transport layer (PTL): performance evaluation of coating in simulated PEM electrolyzer10.1016/j.ijhydene.2025.02.047 ↗
18. Thin film surface modifications of thin/tunable liquid/gas diffusion layers for high-efficiency proton exchange membrane electrolyzer cells10.1016/j.apenergy.2017.09.004 ↗
19. Corrosion behavior of metallic coatings on titanium bipolar plates of proton exchange membrane water electrolysis10.1016/j.ijhydene.2024.03.242 ↗
20. Comparison of the corrosion behavior of pure titanium and its alloys in fluoride-containing sulfuric acid10.1016/j.corsci.2015.11.003 ↗
21. Determination of effective capacitance and film thickness from constant-phase-element parameters10.1016/j.electacta.2009.10.065 ↗
22. Diffusion impedance of electroactive materials, electrolytic solutions and porous electrodes: warburg impedance and beyond10.1016/j.electacta.2018.05.136 ↗
23. Simplified FTacV model to quantify the electrochemically active site density in PGM-free ORR catalysts10.1016/j.electacta.2023.142865 ↗
24. Orazem · 2008 · 383
25. Approaches for measuring the surface areas of metal oxide electrocatalysts for determining their intrinsic electrocatalytic activity10.1039/C8CS00848E ↗
26. Accelerated degradation of Pt-coated Ti porous transport layers under dynamic potential pulses in PEMWEs10.1039/D5TA00960J ↗
27. Impacts of PTL coating gaps on cell performance for PEM water electrolyzer10.1016/j.apenergy.2023.122274 ↗
28. Assessing potential profiles in water electrolysers to minimise titanium use10.1039/D2EE00876A ↗
29. Anodic behaviour of titanium in concentrated sulphuric acid solutions. Influence of some oxidizing inhibitors10.1007/BF00608918 ↗
30. Electrochemical behaviour of titanium in H2SO4–MnSO4 electrolytes10.1016/j.electacta.2005.09.031 ↗
31. Investigation on passivity of titanium under steady-state conditions in acidic solutions10.1016/j.matchemphys.2010.12.028 ↗
32. Atlas of electrochemical equilibria in aqueous solutions
33. Corrosion rates for titanium Gr.2 and Gr.7, (n.d.). http://www.metalspiping.com/corrosion-rates-for-ti-gr-2-and-gr-7.html (accessed July 9, 2025)..
34. 1990
35. Characterization of thin anodic oxides of Ti–Nb alloys by electrochemical impedance spectroscopy10.1016/j.electacta.2012.06.029 ↗
36. Corrosion of metallic biomaterials: a review10.3390/ma12030407 ↗
37. Dissolution of the Ti porous transport layer in proton exchange membrane water electrolyzers10.1039/D4TA02755H ↗
38. Composite anode for PEM water electrolyzers: lowering iridium loadings and reducing material costs with a conductive additive10.1021/acsaem.4c01866 ↗
39. Membrane strategies for water electrolysis10.1021/acsenergylett.2c01609 ↗
40. Anodic Behavior of Titanium in Aqueous Media | CORROSION | Association for Materials Protection and Performance, (n.d.)..
41. Selecting the regularization parameter in the distribution of relaxation times10.1149/1945-7111/acbca4 ↗
42. Advanced impedance analysis of direct quinone fuel cells using distribution of relaxation times10.1016/j.electacta.2023.142877 ↗
43. Identifying electrochemical processes by distribution of relaxation times in proton exchange membrane electrolyzers10.1016/j.jpowsour.2024.235850 ↗
44. Corrosion characterization of titanium alloys by electrochemical techniques10.1016/j.electacta.2005.02.121 ↗
45. Electrochemical impedance spectroscopy study of the passive oxide film on titanium for implant application10.1016/0013-4686(95)00465-3 ↗
46. Corrosion of Titanium Alloys Anodized Using Electrochemical Techniques, (n.d.)..
47. Anodic production and characterization of biomimetic oxide layers on grade 4 titanium for medical applications10.3390/jfb15070180 ↗
48. Stability of Bipolar Plate Materials for Proton‐Exchange Membrane Water Electrolyzers: Dissolution of Titanium and Stainless Steel in DI Water and Highly Diluted Acid - Fiedler - 2023 - Chemelectrochem - Wiley Online Library, (n.d.)..
49. The effect of potential on surface characteristic and corrosion resistance of anodic oxide film formed on commercial pure titanium at the potentiodynamic-aging mode10.3390/ma12030370 ↗
50. EIS characterization of Ti alloys in relation to alloying additions of Ta10.3390/ma15020476 ↗
51. Evaluation of anodized aluminum surfaces with electrochemical impedance spectroscopy10.1149/1.2095786 ↗
52. Technical note: impedance spectroscopy as quality control and corrosion test for anodized Al alloys10.5006/1.3583832 ↗
53. Gold dissolution: towards understanding of noble metal corrosion10.1039/c3ra42684j ↗
54. Negative capacitance or inductive loop? – a general assessment of a common low frequency impedance feature10.1016/j.elecom.2018.11.017 ↗
55. Impedance measurements and analysis of the corrosion of chromium10.1149/1.2086861 ↗
56. On the corrosion mechanism of Mg investigated by electrochemical impedance spectroscopy10.1016/j.electacta.2019.03.080 ↗
57. Electrochemical impedance spectroscopy and its applications10.1007/0-306-46916-2_2 ↗
58. Real surface area measurements in electrochemistry10.1351/pac199163050711 ↗
59. Electrochemical evaluation of niobium corrosion resistance in simulated anodic PEM electrolyzer environment10.20964/2020.11.47 ↗
60. Evaluation of niobium-based bipolar plates with ultra-low precious metal coatings for high-performance and durable PEM water electrolyzers
61. Electrolysis of water on oxide surfaces10.1016/j.jelechem.2006.11.008 ↗
62. Electrocatalysis in the anodic evolution of oxygen and chlorine10.1016/0013-4686(84)85004-5 ↗