journal article·2026-06Open access

Molecular precursor enabled surface modification of low-cost Li- and Mn-rich cathode material via spray drying coating

Raneen Taha, Vamakshi Yadav, Zhongyi Liu, Jigang Zhou, Nicholas Pieczonka, Yuntao Gu, Christopher Rohen, Yihong Liu, Lijia Liu, Heng-Yong Nie, Hasnain Hafiz, Lei Wang, Greg Less, Alan Taub

Abstract

Lithium and manganese-rich (LMR) layered oxide cathode materials are promising candidates for low-cost and high energy density lithium-ion batteries but suffer from structural evolution and transition metal (TM) dissolution during high voltage cycling (≥4.3 V), which results in voltage fading and irreversible lithium loss. Surface coatings can mitigate these issues, yet conventional routes (ALD/CVD) are costly and may yield in resistive layers. Here, we report a scalable spray-dry process using aluminum isopropoxide as a molecular precursor to form a thin aluminum containing surface layer on LMR powders. Optimizing calcination at 450 °C yields ∼80% capacity retention over 500 cycles (2-4.6V, C/3) with preserved rate capability. Multimodal characterizations (HRTEM, XRD, XPS, XANES/EXAFS, TOF-SIMS) are consistent with aluminum being localized within the reconstructed near-surface region rather than forming a distinct continues aluminum oxide shell and promotes a cathode-electrolyte interphase (CEI) enriched in inorganic species. This molecular precursor spray-dry strategy is scalable and offers a practical route to stabilize LMR cathodes at high voltage.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Extraction and Separation Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. ATHENA, ARTEMIS, HEPHAESTUS: data analysis for X-ray absorption spectroscopy using IFEFFIT10.1107/S0909049505012719 ↗
2. Unveiling the role of Al2O3 in preventing surface reconstruction10.1021/acsaem.8b01877 ↗
3. Phosphorus derivatives as electrolyte additives for lithium-ion batteries: the removal of O2 generated from lithium-rich layered oxide cathode
4. Review-surface coatings for cathodes in lithium-ion batteries: from crystal structures to electrochemical performance10.1149/1945-7111/ac60f3 ↗
5. Understanding the role of temperature and cathode composition10.1021/acsami.7b00595 ↗
6. Facet-dependent rock-salt reconstruction on the surface of layered oxide cathodes10.1021/acs.chemmater.7b03901 ↗
7. Facet-dependent disorder in pristine high-voltage lithium-manganese-rich cathode material
8. Effect of fluoride complexation by aluminium ions on the corrosion behaviour of aluminium cathodes used in zinc electrowinning10.1016/j.jmrt.2022.12.037 ↗
9. Promise and reality of post-lithium-ion batteries with high energy densities10.1038/natrevmats.2016.13 ↗
10. An in-depth understanding of the effect of aluminum doping in high-nickel cathodes for lithium-ion batteries10.1016/j.ensm.2020.09.015 ↗
11. Assessing the environmental impact of atomic layer deposition (ALD) processes and pathways to lower it10.1021/acsmaterialsau.3c00002 ↗
12. Atomic layer deposition
13. Green CVD-toward a sustainable philosophy for thin-film deposition by chemical vapor deposition10.1116/6.0001125 ↗
14. Enhancing the thermal and upper-voltage performance of Ni-rich cathode material by a homogeneous and facile coating method: spray-drying coating with nano-Al2O310.1021/acsami.6b05629 ↗
15. Water-based spray drying of WC–Co powders: a sustainable route to environmentally safer granulation without compromising performance10.3390/powders4030025 ↗
16. Introducing an efficient and eco-friendly spray-drying process for the synthesis of NCM precursor for lithium-ion batteries10.33961/jecst.2023.00752 ↗
17. Recent advances in spray drying of micro-nanostructured materials for lithium-ion batteries10.1007/s12598-025-03564-9 ↗
18. Exploring the impact of γ-Al2O3 coating on reaction kinetics and lithium-ion diffusion in LiNi0.5Mn0.3Co0.2O2 cathode materials: a tale of two techniques
19. Ni and Co segregations on selective surface facets and rational design of layered lithium transition-metal oxide cathodes10.1002/aenm.201502455 ↗
20. Persistent and partially mobile oxygen vacancies in Li-rich layered oxides10.1038/s41560-021-00832-7 ↗
21. Stabilizing layered structure in aqueous electrolyte via dynamic water intercalation/deintercalation10.1002/adma.202108541 ↗
22. Addressing cation mixing in layered structured cathodes for lithium-ion batteries: a critical review10.1016/j.nanoms.2022.09.001 ↗
23. Lattice doping-regulated interfacial reactions in cathodes for enhanced cycling stability10.1038/s41467-019-11299-2 ↗
24. Advances in manganese-oxide “composite” electrodes for lithium-ion batteries10.1039/b417616m ↗
25. Highly crystalline alumina surface coating from hydrolysis of aluminum isopropoxide on lithium-rich layered oxide10.1016/j.jpowsour.2015.02.019 ↗
26. Atomic to nanoscale investigation of functionalities of an Al2O3 coating layer on a cathode for enhanced battery performance10.1021/acs.chemmater.5b04301 ↗
27. Spectroscopic fingerprints of valence and spin states in manganese oxides and fluorides10.1016/j.cap.2012.09.017 ↗
28. Understanding the role of alumina (Al2O3), pentalithium aluminate (Li5AlO4), and pentasodium aluminate (Na5AlO4) coatings on the Li- and Mn-rich NCM cathode material 0.33Li2MnO3·0.67Li(Ni0.4Co0.2Mn0.4)O2 for enhanced electrochemical performance
29. Relationship between Mn oxidation state changes and oxygen reduction activity in (La,Ca)MnO3 as probed by in situ XAS and XES10.1021/acscatal.1c00997 ↗
30. Surface chemistry dependence on aluminum doping in Ni-rich LiNi0.8Co0.2-yAlᵧO2 cathodes10.1038/s41598-019-53932-6 ↗
31. Tuning the ratio of Al2O3 to LiAlO2 in the composite coating layer for high performance LiNi0.5Mn1.5O4 materials10.1016/j.ceramint.2020.03.009 ↗
32. The synergistic dual-layer coating of hard carbon and soft carbon enhances the lithium-ion storage capacity of graphite anode10.1016/j.electacta.2025.146999 ↗
33. Regulation of anion redox activity via solid-acid modification for highly stable Li-Rich Mn-Based layered cathodes
34. Evolution mechanism of phase transformation of Li-rich cathode materials in cycling10.1016/j.electacta.2019.135109 ↗
35. Origin of structural degradation in Li-rich layered oxide cathode10.1038/s41586-022-04689-y ↗
36. Effect of annealing on the structure, composition, and electrochemistry of NMC811 coated with Al2O3 using an alkoxide precursor
37. Yadav
38. Yadav
39. Assessing dead time effects when attempting isotope ratio quantification by time-of-flight secondary ion mass spectrometry10.1116/6.0002954 ↗
40. Exploring the surface sensitivity of TOF-secondary ion mass spectrometry by measuring the implantation and sampling depths of Bin and C60 ions in organic films10.1021/ac202713k ↗
41. ToF-SIMS sputter depth profiling of interphases and coatings on lithium metal surfaces10.1038/s42004-025-01426-0 ↗
42. Role of surface acidity in the surface stabilization of the high-voltage cathode LiNi0.6Mn0.2Co0.2O210.1021/acsomega.0c00458 ↗
43. Face to face at the cathode–electrolyte interphase: from interface features to interphase formation and dynamics
44. High-voltage positive electrode materials for lithium-ion batteries10.1039/C6CS00875E ↗
45. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
46. Efficiency of ab initio total-energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
47. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
48. Accurate and numerically efficient r2SCAN meta-generalized gradient approximation10.1021/acs.jpclett.0c02405 ↗
49. Nonlocal van der Waals density functional made simple and efficient10.1103/PhysRevB.87.041108 ↗
50. Python materials genomics (pymatgen): a robust, open-source python library for materials analysis10.1016/j.commatsci.2012.10.028 ↗