Slurry stability and interfacial degradation in borate-water-based quasi-solid electrolytes for lithium-ion batteries
Source abstract
Abstract
Aqueous quasi-solid electrolytes have attracted increasing attention as safe and environmentally benign alternatives for lithium-ion batteries. Here, we systematically investigate the slurry properties, interfacial structure, and electrochemical behavior of a borate–water-based three-dimensional slime-interface quasi-solid electrolyte (3D-SLISE), composed of an amorphous Li 2 B 4 O 7 matrix, lithium salts, carboxymethyl cellulose, and water. Owing to its slime-like aqueous network, 3D-SLISE exhibits three-dimensional ionic conduction and adaptive interfacial adhesion, enabling fully atmospheric fabrication and eliminating the need for dry-room processing. Systematic analyses reveal that slurry stability is governed by crystallization-induced aggregation and polymer adsorption, while electrochemical degradation is dominated by reductive decomposition accompanied by hydrogen evolution at the anode interface. The effects of electrolyte composition and surface modification of anode materials on suppressing parasitic reactions are quantitatively evaluated. Furthermore, the water-soluble borate matrix enables redispersion of electrode composites, offering a practical route for direct recovery of active materials. These results clarify the key physicochemical factors governing processability and electrochemical stability in aqueous quasi-solid electrolytes and provide practical guidelines for developing scalable and reliable quasi-solid-state lithium-ion batteries. • Slurry stability and interfacial structure of borate–water electrolytes are clarified. • 3D-SLISE enables ambient fabrication without electrolyte injection. • Hydrogen evolution governs degradation in aqueous quasi-solid electrolytes. • Anode interface engineering improves long-term cycling stability. • Water-soluble matrices enable direct cathode recycling.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (84)
Show source-provided references
1. 2023/1542 of the European Parliament and of the Council of 12 July 2023 on batteries and waste batteries, amending Directive 2008/98/EC and Regulation (EU) 2019/1020 and repealing Directive 2006/66/EC
2. Best practices for life cycle assessment of batteries10.1038/s41893-023-01067-y ↗
3. Pathway decisions for reuse and recycling of retired lithium-ion batteries considering economic and environmental functions10.1038/s41467-024-52030-0 ↗
4. Carbon footprint distributions of lithium-ion batteries and their materials10.1038/s41467-024-54634-y ↗
5. Life cycle comparison of industrial-scale lithium-ion battery recycling and mining supply chains10.1038/s41467-025-56063-x ↗
6. The combustion behavior of large scale lithium titanate battery10.1038/srep07788 ↗
7. Toxic fluoride gas emissions from lithium-ion battery fires10.1038/s41598-017-09784-z ↗
8. Moisture stability of sulfide solid-state electrolytes10.3389/fenrg.2022.882508 ↗
9. Energy consumption of current and future production of lithium-ion and post lithium-ion battery cells10.1038/s41560-023-01355-z ↗
10. Sustainability of artisanal mining of cobalt in DR Congo10.1038/s41893-018-0139-4 ↗
11. Recycling lithium-ion batteries from electric vehicles10.1038/s41586-019-1682-5 ↗
12. Electric vehicle battery chemistry affects supply chain disruption vulnerabilities10.1038/s41467-024-46418-1 ↗
13. Benchmarking the performance of all-solid-state lithium batteries10.1038/s41560-020-0565-1 ↗
14. A cost-effective and humidity-tolerant chloride solid electrolyte for lithium batteries10.1038/s41467-021-24697-2 ↗
15. 4.6 V moisture-tolerant electrolytes for lithium-ion batteries10.1002/adma.202408039 ↗
16. Mechanical behavior of Li-ion-conducting crystalline oxide-based solid electrolytes: a brief review10.1007/s11581-017-2314-4 ↗
17. A rechargeable lithium-air battery using a lithium ion-conducting lanthanum lithium titanate ceramics as an electrolyte separator10.1016/j.jpowsour.2012.11.098 ↗
18. A bird's-eye view of Li-stuffed garnet-type Li7La3Zr2O12 ceramic electrolytes for advanced all-solid-state Li batteries10.1039/C9EE01548E ↗
19. Processing thin but robust electrolytes for solid-state batteries10.1038/s41560-020-00759-5 ↗
20. Ionic conductivity and ion transport mechanisms of solid-state lithium-ion battery electrolytes: a review10.1002/ese3.1163 ↗
21. “Water-in-salt” electrolyte enables high-voltage aqueous lithium-ion chemistries10.1126/science.aab1595 ↗
22. Hydrate-melt electrolytes for high-energy-density aqueous batteries10.1038/nenergy.2016.129 ↗
23. 4.0 V aqueous Li-ion batteries10.1016/j.joule.2017.08.009 ↗
24. “Water-in-Salt” electrolyte enabled LiMn2O4/TiS2 lithium-ion batteries10.1016/j.elecom.2017.07.016 ↗
25. First-principles study on the cation-dependent electrochemical stabilities in Li/Na/K hydrate-melt electrolytes10.1021/acsami.0c10472 ↗
26. Aqueous Li4Ti5O12/LiMn2O4 cell with a Li-ion conducive solid electrolyteseparator and an electrodeposition of Zn to an anode10.1149/MA2021-01298mtgabs ↗
27. Challenges and strategies for high-energy aqueous electrolyte rechargeable batteries10.1002/anie.202004433 ↗
28. Enabling high-energy-density aqueous batteries with hydrogen bond-anchored electrolytes10.1016/j.matt.2021.10.021 ↗
29. Stable lithium-ion batteries based on a hybrid aqueous/organic electrolyte10.1016/j.jpowsour.2024.234803 ↗
30. Unusual stability of acetonitrile-based superconcentrated electrolytes for fast-charging lithium-ion batteries10.1021/ja412807w ↗
31. Corrosion prevention mechanism of aluminum metal in superconcentrated electrolytes10.1002/celc.201500235 ↗
32. The effect of concentration of lithium salt on the structural and transport properties of ionic liquid-based electrolytes10.3389/fchem.2019.00945 ↗
33. Liquid Madelung energy accounts for the huge potential shift in electrochemical systems10.1038/s41467-023-44582-4 ↗
34. Application of quasi-solid-state silica nanoparticles-ionic liquid composite electrolytes to all-solid-state lithium secondary battery10.1016/j.jpowsour.2012.02.049 ↗
35. Development of bipolar all-solid-state lithium battery based on quasi-solid-state electrolyte containing tetraglyme-LiTFSA equimolar complex10.1038/srep08869 ↗
36. Nanocomposite quasi-solid-state electrolyte for high-safety lithium batteries10.1007/s12274-017-1526-2 ↗
37. Silica gel solid nanocomposite electrolytes with interfacial conductivity promotion exceeding the bulk Li-ion conductivity of the ionic liquid electrolyte filler
38. High rate capability of all-solid-state lithium batteries using quasi-solid-state electrolytes containing ionic liquids10.1149/1945-7111/ab743d ↗
39. Interfacial conductivity enhancement and pore confinement conductivity-lowering behavior inside the nanopores of solid silica-gel nanocomposite electrolytes10.1021/acsami.1c09246 ↗
40. ZIF-8-based quasi-solid-state electrolyte for lithium batteries10.1021/acsami.9b13712 ↗
41. One-stone-for-two-birds strategy to construct robust 2D conjugated metal-organic framework-based quasi-solid-state lithium-organic batteries10.1016/j.cej.2024.157873 ↗
42. A triptycene-based 2D metal-organic framework with vertically extended structure as filler and guide layer for stable quasi-solid-state lithium-metal batteries10.1016/j.jcis.2025.139410 ↗
43. “Water-in-eutectogel” electrolytes for quasi-solid-state aqueous lithium-ion batteries10.1002/aenm.202200401 ↗
44. Borate-water-based 3D-slime interface quasi-solid electrolytes for Li-ion batteries10.1002/adma.202505649 ↗
45. The gelation of polyvinyl alcohol with borax10.1021/ed063p57 ↗
46. The science of slime
47. Highly transparent, stretchable, and self-healing ionic-skin triboelectric nanogenerators for energy harvesting and touch applications10.1002/adma.201702181 ↗
48. Preparation of sintering-free non-crystalline Li2B4O7 ceramics for Li-ion battery's binder10.35848/1347-4065/aceb6d ↗
49. Preparation and characterization of glass solid electrolytes in the pseudoternary system Li3BO3-Li2SO4-Li2CO310.1016/j.ssi.2017.05.009 ↗
50. Electrical and mechanical properties of glass and glass-ceramic electrolytes in the system Li3BO3-Li2SO410.2109/jcersj2.17026 ↗
51. Optimization of a heterogeneous ternary Li3PO4-Li3BO3-Li2SO4 mixture for Li-ion conductivity by machine Learning10.1021/acs.jpcc.9b11654 ↗
52. Direct recycling of spent cathode material at ambient conditions via spontaneous lithiation10.1038/s41893-024-01412-9 ↗
53. Direct recycling of EV production scrap NMC532 cathode materials10.1039/D4SU00389F ↗
54. Advanced high-voltage aqueous lithium-ion battery enabled by “water-in-bisalt” electrolyte10.1002/anie.201602397 ↗
55. Suppressing hydrogen evolution in aqueous lithium-ion batteries with double-site hydrogen bonding10.1021/acsenergylett.2c01993 ↗
56. Li4Ti5O12 electrodes operated under hurdle conditions and SiO2 incorporation effect10.1016/j.jpowsour.2013.03.017 ↗
57. Trend of developing aqueous liquid and gel electrolytes for sustainable, safe, and high-performance Li-ion batteries10.1007/s40820-023-01220-4 ↗
58. Hydrogen isotope effects: a new path to high-energy aqueous rechargeable Li/Na-ion batteries10.1016/j.esci.2023.100121 ↗
59. Challenges and possibilities for aqueous battery systems10.1038/s43246-023-00367-2 ↗
60. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
61. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
62. Effect of the damping function in dispersion corrected density functional theory10.1002/jcc.21759 ↗
63. A unified formulation of the constant temperature molecular dynamics methods10.1063/1.447334 ↗
64. Canonical dynamics: equilibrium phase-space distributions10.1103/PhysRevA.31.1695 ↗
65. Linear and nonlinear optical properties of lithium tetraborate10.1016/S0038-1098(98)00190-2 ↗
66. High-temperature properties of lithium tetraborate Li2B4O710.1088/0022-3727/45/17/175305 ↗
67. Effects of a solid electrolyte coating on the discharge kinetics of a LiCoO2 electrode: mechanism and potential applications10.1039/D0TA05656A ↗
68. A LiFSI–LiTFSI binary-salt electrolyte to achieve high capacity and cycle stability for a Li-S battery10.1039/C4CC06666A ↗
69. A review of phosphate and borate sol-gel glasses for biomedical applications10.1002/anbr.202000055 ↗
70. Lithium borate gel films prepared from aqueous solution10.1023/A:1004699322404 ↗
71. High performances of dual network PVA hydrogel modified by PVP using borax as the structure-forming accelerator10.1080/15685551.2017.1382433 ↗
72. Multi-technique assessment of chelators-loaded PVA-borax gel-like systems performance in cleaning of stone contaminated with copper corrosion products10.3390/gels10070455 ↗
73. Aqueous lithium-ion batteries10.1002/cey2.106 ↗
74. High ionic conductivity in lithium lanthanum titanate10.1016/0038-1098(93)90841-A ↗
75. Structures and ion transport properties of hydrate-melt electrolytes: a machine-learning potential molecular dynamics study10.1021/acs.jpcb.4c07559 ↗
76. Impact of fluorine-based lithium salts on SEI for all-solid-state PEO-based lithium metal batteries
77. Guidelines for all-solid-state battery design and electrode buffer layers based on chemical potential profile calculation10.1021/acsami.9b03053 ↗
78. Coating layer design principles considering lithium chemical potential distribution within solid electrolytes of solid-state batteries10.1038/s43246-024-00578-1 ↗
79. Preparation of the amorphous SiO2-coated Li4Ti5O12 anode and its high cyclability
80. Preparation and characteristic of carbon-coated Li4Ti5O12 anode material10.1016/j.jpowsour.2007.06.107 ↗
81. Challenges of spinel Li4Ti5O12 for lithium-ion battery industrial applications10.1002/aenm.201601625 ↗
82. Defect chemistry in layered transition-metal oxides from screened hybrid density functional calculations10.1039/C4TA00673A ↗
83. Electron microscopy and spectroscopic study of structural changes, electronic properties and conductivity in annealed LixCoO2
84. Large lithium storage in highly crystalline TiNb2O7 nanoparticles synthesized by a hydrothermal method as anodes for lithium-ion batteries10.1016/j.ssi.2018.02.027 ↗