journal article·2026-06Open access

Chromium-diffusion-induced degradation in metal-supported solid oxide fuel cells with porous stainless-steel supports

Yohei Miura, Satoshi Takemiya, Yuuki Shibata, Yuki Cho, Kosuke Hara, Takeshi Shiomi, Gen Inoue, Prabhakar Singh, Shunsuke Taniguchi, Kazunari Sasaki

Abstract

The degradation mechanisms in metal-supported solid oxide fuel cells (MS-SOFCs) are investigated through long-term durability testing and oxidation analysis of porous stainless steel under a humidified hydrogen atmosphere. An MS-SOFC fabricated using 1C44Mo29 steel undergoes a durability test for 8400 h, resulting in a degradation rate of 5.2 %/1000h. Post-test analysis reveals breakaway oxidation of fine alloy particles at the interface between the zirconia-based anode backbone and metal support, along with Ni–Cr formation within the anode, which potentially increases ohmic resistance and hydrogen oxidation polarization resistance. To analyze the correlation between microstructural changes and the electrical resistance of porous stainless steel, a volumetric segmentation scheme is developed using a deep learning model applied to three-dimensional reconstructions from plasma focused ion beam scanning electron microscopy. The results demonstrate that the contribution of metal support oxidation to the overall cell performance is only 7.3 mΩcm 2 even after 8400 h under 50% H 2 –50% H 2 O, indicating a minimal impact on cell performance; however, Cr depletion in the metal support can cause detrimental degradation. • Ni-Cr formation in anode could degrade hydrogen oxidation reaction activity. • Breakaway oxidation occurs in fine alloy particles at the anode interface. • AI-assisted phase segmentation quantifies oxidation of porous stainless steel. • ASR of porous metal support remains 7.3 mΩ cm 2 after 8400 h. • Porous stainless steel has a risk of chromium depletion during operation.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · High-Temperature Coating Behaviors · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. Durability enhancement of novel monolithic metal supported solid oxide fuel cells through processing optimizations10.1016/j.ijhydene.2022.12.139 ↗
2. Production of a monolithic fuel cell stack with high power density10.1038/s41467-022-28970-w ↗
3. Improvement of the internal reforming of metal-supported SOFC at low temperatures10.1016/j.ijhydene.2023.03.195 ↗
4. Ceres power steel cell technology: rapid progress towards a truly commercially viable SOFC10.1149/06801.0095ecst ↗
5. Progress in durability of metal-supported solid oxide fuel cells with infiltrated electrodes10.1016/j.jpowsour.2019.226935 ↗
6. Redox stability of metal-supported fuel cells with nickel/gadolinium-doped ceria anode10.1016/j.jpowsour.2019.226751 ↗
7. Dynamic-temperature operation of metal-supported solid oxide fuel cells10.1016/j.jpowsour.2018.05.094 ↗
8. 2016
9. J.J. Botti, M.J. Grieve, J.A. MacBain “Electric Vehicle Range Extension Using an SOFC APU” SAE technical paper 2005-01-1172, World Congress & Exhibition (SAE International)..10.4271/2005-01-1172 ↗
10. SOFC system for battery electric vehicle range extension: results of the first half of the Mestrex Project10.1149/07801.0191ecst ↗
11. University of Louisiana at Lafayette "High performance metal-supported SOFC system for range extension of commercial aviation"
12. Demonstration of SOFC power sources for drones (UAVs; unmanned aerial vehicles)10.1149/09101.0149ecst ↗
13. Dynamic operation of metal-supported solid oxide electrolysis cells10.1016/j.ijhydene.2024.01.345 ↗
14. Metal supported electrolysis cells10.3390/en15062045 ↗
15. Reversible operation of metal supported solid oxide cells10.1149/1945-7111/ad3aaa ↗
16. Progress in metal corrosion mechanism and protective coating technology for interconnect and metal support of solid oxide cells10.1016/j.rser.2023.113597 ↗
17. “The Effect of H2 and H2O on the Oxidation of 304LStainless Steel at 600 ◦C: general Behaviour (Part I)” oxid
18. Corrosion stability of ferritic stainless steels for solid oxide electrolyser cell interconnects10.1016/j.corsci.2010.06.006 ↗
19. Long-term stability of metal-supported solid oxide fuel cells employing infiltrated electrodes10.1016/j.jpowsour.2015.06.114 ↗
20. Development of planar metal supported SOFC with novel cermet anode10.1149/1.3205585 ↗
21. SOFC stacks for mobile applications with excellent robustness towards thermal stresses10.1016/j.ijhydene.2020.07.159 ↗
22. Metal supported SOFCs for Mobile applications using hydrocarbon fuels10.1149/1945-7111/ab9b9d ↗
23. Investigation into the diffusion and oxidation behavior of the interface between a plasma-sprayed anode and a porous steel support for solid oxide fuel cells10.1016/j.jpowsour.2016.05.020 ↗
24. Numerical evaluation of oxide growth in metallic support microstructures of solid oxide fuel cells and its influence on mass transport10.1016/j.jpowsour.2015.08.020 ↗
25. Pre-oxidation of porous ferritic Fe22Cr alloys for lifespan extension at high-temperature10.1016/j.corsci.2024.112129 ↗
26. Oxidation of porous stainless steel supports for metal-supported solid oxide fuel cells10.1016/j.ijhydene.2020.08.015 ↗
27. Oxidation of porous stainless steel supports for metal-supported solid oxide electrolysis cells10.1016/j.ijhydene.2022.11.235 ↗
28. “Oxidation study of porous metal substrates for metal supported proton ceramic electrolyzer cells” corros
29. High temperature stability of porous metal substrates under highly humidified hydrogen conditions for metal supported Solid Oxide Fuel Cells
30. Unravelling the oxidation behaviors of porous stainless steel 430L substrate for metal-supported solid oxide fuel cells10.1016/j.ijhydene.2024.06.092 ↗
31. Modeling of microstructure evolution during high-temperature oxidation of porous Fe-Cr steels
32. Integrated application of semantic segmentation-assisted deep learning to quantitative multi-phased microstructural analysis in composite materials: case study of cathode composite materials of solid oxide fuel cells10.1016/j.jpowsour.2020.228458 ↗
33. 3D microstructures of solid oxide fuel cell Ni-YSZ anodes with carbon deposition10.1016/j.cej.2023.141680 ↗
34. Super-resolved In-operando observation of SOFC pattern electrodes10.1149/10301.2087ecst ↗
35. "Metal-supported solid oxide fuel cells with exceptionally high power density for range extender systems" cell Rep
36. Electrochemical characterisation and durability assessment of Ni/GDC-infiltrated metal-supported solid oxide cells for co-electrolysis operation10.1016/j.jpowsour.2025.239016 ↗
37. Electrical conductivity and defect structure of Cr2O3. II. Reduced temperatures (<∼ 1000 C)10.1016/0167-2738(94)90402-2 ↗
38. Electrical conductivity and seebeck voltage of Fe2O3, pure and doped, as a function of temperature and oxygen pressure10.1016/0167-2738(84)90156-5 ↗
39. Characterization of ZrO2 co-doped with Sc2O3 and CeO2 electrolyte for the application of intermediate temperature SOFCs10.1016/j.ssi.2004.07.013 ↗
40. Phase transformation/stabilization and ionic conductivity in tantalum oxide co-doped zirconia-scandia solid electrolyte10.1007/s11581-022-04604-5 ↗
41. Electrical Conductivity of 10 mol% Sc2O3–1 mol% M2O3–ZrO2 Ceramics10.1111/j.1551-2916.2012.05126.x ↗
42. Relationship between cation segregation and the electrochemical oxygen reduction kinetics of La0. 6Sr0. 4CoO3− δ thin film electrodes10.1149/1.3581114 ↗
43. Improved redox cycling durability in alternative Ni alloy-based SOFC anodes10.1149/1945-7111/abac87 ↗
44. Progress in La-doped SrTiO3 (LST)-based anode materials for solid oxide fuel cells10.1039/C3RA42666A ↗
45. Thermodynamics of gas phase chromium species: the chromium oxides, the chromium oxyhydroxides, and volatility calculations in waste incineration processes10.1016/0010-2180(93)90087-J ↗
46. Electrically conductive diffusion barrier layers for metal-supported SOFC10.1016/j.ssi.2008.03.002 ↗
47. Metal-supported SOFC with ceramic-based anode10.1149/1.3570047 ↗
48. Advances in metal supported cells in the METSOFC EU consortium10.1002/fuce.201200185 ↗
49. Green syngas production with metal-supported solid oxide cells10.1016/j.jpowsour.2025.237825 ↗
50. Infiltrated electrodes for metal supported solid oxide electrolysis cells10.1016/j.jpowsour.2025.237296 ↗
51. A parameter study of solid oxide electrolysis cell degradation: microstructural changes of the fuel electrode10.1016/j.electacta.2018.04.170 ↗
52. High-temperature corrosion of ∼ 30 pct porous FeCr stainless steels in air: Long-Term evaluation up to breakaway10.1007/s11661-023-07005-z ↗
53. Ö. Çiçek, A. Abdulkadir, S. S. Lienkamp, T. Brox, and O. Ronneberger, "3D U-Net: learning dense volumetric segmentation from sparse annotation", Medical Image Computing and Computer-Assisted Intervention–MICCAI 2016: 19Th International Conference, Athens, Greece, October 17-21, 2016, Proceedings, Part II 19 (pp. 424-432). Springer International Publishing.https://doi.org/10.1007/978-3-319-46723-8_49.10.1007/978-3-319-46723-8_49 ↗
54. Metrics for evaluating 3D medical image segmentation: analysis, selection, and tool10.1186/s12880-015-0068-x ↗
55. O. Ronneberger, P. Fischer and T. Brox, "U-net: convolutional networks for biomedical image segmentation" medical image computing and computer-assisted intervention–MICCAI 2015: 18Th International Conference, Munich, Germany, October 5-9, 2015, Proceedings, Part III 18 (pp. 234-241). Springer international publishing.https://doi.org/10.1007/978-3-319-24574-4_28.10.1007/978-3-319-24574-4_28 ↗
56. Deep learning-based segmentation of lithium-ion battery microstructures enhanced by artificially generated electrodes10.1038/s41467-021-26480-9 ↗
57. Springer Materials, "MnCr2O4 (Cr2Mno4) Crystal Structure"https://materials.springer.com/isp/crystallographic/docs/sd_0553605.
58. Springer Materials, "Cr2O3 Crystal Structure"https://materials.springer.com/isp/crystallographic/docs/sd_0541813.
59. Electrical conductivity of the manganese chromite spinel solid solution10.1111/j.1551-2916.2005.00205.x ↗
60. Degradation mechanisms of metal-supported solid oxide cells and countermeasures: a review10.3390/ma14113139 ↗
61. Oxidation kinetics and electrical properties of oxide scales formed under exposure to air and Ar–H2-H2O atmospheres on the Crofer 22 H ferritic steel for high-temperature applications such as interconnects in solid oxide cell stacks10.1016/j.ijhydene.2024.11.091 ↗
62. Steam oxidation behavior of four general-purpose stainless steels in humidified hydrogen environment of solid oxide fuel cell10.1149/1945-7111/adc5a7 ↗
63. Oxidation limited lifetimes of chromia forming ferritic steels10.1002/maco.200303798 ↗
64. Comparison of Cu–Mn and Mn–Co spinel coatings for solid oxide fuel cell interconnects10.1016/j.ijhydene.2022.08.239 ↗