journal article·2026-06Open access

High-shear restructuring of carbon black networks for durable and high-performance microporous layers in PEMFCs

Seung-Cheol Shin, Taesik Eom, Myungjin Hong, Seong Jun Kim, Eun Ju Jeong, Eun Soo Kim, Hyunchul Ju, Sang Eui Lee

Abstract

The microporous layer (MPL), a key component of the gas diffusion layer (GDL), regulates gas transport, electron conduction, and water management in proton exchange membrane fuel cell (PEMFC). However, the relationship between intrinsic carbon black (CB) properties, high-shear dispersion processes, and the resulting MPL microstructure has not been systematically clarified. In this study, the effects of intrinsic CB properties and particle network restructuring induced by three-roll milling (TRM) on MPL performance were investigated. Three CBs were classified according to their electrical conductivity and shear-induced fragmentability. CB with high conductivity and high fragmentability (CB_HH) underwent effective fragmentation during TRM and recombined with PTFE to form a stable inter-particle network containing micro-, meso-, and macro-pores. This reconstructed network improved electrical stability and mass transport within the MPL. Consequently, the CB_HH-GDL exhibited only 4.6% resistance variation under repeated compression cycles. Fuel cell tests showed maximum current densities of 1090 and 1280 mA cm −2 at 50% and 100% relative humidity, respectively, representing improvements of over 55% at 50% relative humidity compared with CB with low conductivity and low fragmentability. These results highlight the importance of CB intrinsic properties and shear-induced network restructuring for designing durable and high-performance MPLs.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fuel Cells and Related Materials · Advancements in Solid Oxide Fuel Cells · Nanopore and Nanochannel Transport Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (78)

Show source-provided references
1. Decarbonization of fossil fuels as a strategy to control global warming10.1016/j.rser.2010.11.049 ↗
2. Review of fuel cells to grid interface: configurations, technical challenges and trends10.1016/j.jclepro.2018.12.281 ↗
3. New perspectives on fuel cell technology: a brief review10.3390/membranes10050099 ↗
4. Fuel cell systems for transportation: status and trends10.1016/j.jpowsour.2007.10.026 ↗
5. Evaluation of hot pressing parameters on the electrochemical performance of MEAs based on Aquivion® PFSA membranes10.1016/j.jechem.2019.03.020 ↗
6. A review of polymer electrolyte membrane fuel cell stack testing10.1016/j.jpowsour.2010.07.072 ↗
7. Garche · 2013
8. Visualization of the water distribution in perforated gas diffusion layers by means of synchrotron X-ray radiography10.1016/j.ijhydene.2012.01.141 ↗
9. A review of gas diffusion layers for proton exchange membrane fuel cells—With a focus on characteristics, characterization techniques, materials and designs10.1016/j.pecs.2019.05.002 ↗
10. Effect of a GDL based on carbon paper or carbon cloth on PEM fuel cell performance10.1016/j.fuel.2010.09.003 ↗
11. Alternative architectures and materials for PEMFC gas diffusion layers: a review and outlook10.1016/j.rser.2022.112640 ↗
12. Wetting and evaporation on a carbon cloth type gas diffusion layer for passive direct alcohol fuel cells10.1016/j.molliq.2020.112698 ↗
13. Effect of micro-layer PTFE on the performance of PEM fuel cell electrodes10.1016/j.ijhydene.2011.03.037 ↗
14. Influence of pore-size distribution of diffusion layer on mass-transport problems of proton exchange membrane fuel cells10.1016/S0378-7753(02)00028-9 ↗
15. A study on the dissymmetrical microporous layer structure of a direct methanol fuel cell10.1016/j.electacta.2008.06.063 ↗
16. Facilitating mass transport in gas diffusion layer of PEMFC by fabricating micro-porous layer with dry layer preparation10.1016/j.jpowsour.2008.04.031 ↗
17. Development of a novel hydrophobic/hydrophilic double micro porous layer for use in a cathode gas diffusion layer in PEMFC10.1016/j.ijhydene.2011.04.038 ↗
18. Preparation of hierarchical-pore gas diffusion layer for fuel cell10.1007/s10853-019-04323-9 ↗
19. Improvement in the diffusion characteristics of low Pt-loaded electrodes for PEFCs10.1023/A:1026419102310 ↗
20. Improving the performance of a PEMFC with Ketjenblack EC-600JD carbon black as the material of the microporous layer10.1149/1.1904504 ↗
21. Improved water management for PEFC with interdigitated flow fields using modified gas diffusion layers10.1149/2.0062005JES ↗
22. A bi-functional micro-porous layer with composite carbon black for PEM fuel cells10.1016/j.jpowsour.2006.06.064 ↗
23. Optimal microporous layer for proton exchange membrane fuel cell10.1016/j.jpowsour.2010.03.041 ↗
24. Assessment of graphene as an alternative microporous layer material for proton exchange membrane fuel cells10.1016/j.fuel.2017.11.109 ↗
25. A review of gas diffusion layer properties and water management in proton exchange membrane fuel cell system10.1002/er.6227 ↗
26. A review of gas diffusion layer in PEM fuel cells: materials and designs10.1016/j.ijhydene.2011.12.148 ↗
27. Effects of an MPL on water and thermal management in a PEMFC10.1002/er.4262 ↗
28. Surface modification of commercial carbon black by silane coupling agents for improving dispersibility in rubber compounds10.1002/app.55155 ↗
29. Length-dependent carbon nanotube film structures and mechanical properties10.1088/1361-6528/abef92 ↗
30. Agglomeration and electrical percolation behavior of carbon black dispersed in epoxy resin10.1002/(SICI)1097-4628(19970328)63:13<1741::AID-APP5>3.0.CO;2-G ↗
31. Electrical conductivity of carbon blacks under compression10.1016/j.carbon.2004.10.045 ↗
32. Effect of the particle size of graphene oxide powders on the electrochemical performance of graphene-based supercapacitors10.1088/2631-6331/abe284 ↗
33. Towards next-generation fiber-reinforced polymer composites: a perspective on multifunctionality10.1088/2631-6331/ab47f9 ↗
34. Optimization of cathode microporous layer materials for proton exchange membrane fuel cell10.1016/j.ijhydene.2021.01.169 ↗
35. Effects of the carbon black properties in gas diffusion layer on the performance of proton exchange membrane fuel cells10.1016/j.ijhydene.2023.04.056 ↗
36. Effect of microporous layer composed of carbon nanotube and acetylene black on polymer electrolyte membrane fuel cell performance10.1016/j.ijhydene.2014.10.146 ↗
37. Enhanced performance of proton exchange membrane fuel cell by introducing nitrogen-doped CNTs in both catalyst layer and gas diffusion layer10.1016/j.electacta.2017.08.160 ↗
38. Mass transfer layer for liquid fuel cells10.1016/j.jpowsour.2006.12.065 ↗
39. Enhancing fuel cell performance via laser-induced ablation of gas diffusion nonwoven carbon paper with reduced contact resistance10.1016/j.ijhydene.2025.150085 ↗
40. S.B. Park, S. Kim, Y.-i. Park, M.-H. Oh,Fabrication of GDL Microporous Layer Using PVDF for PEMFCs, IOP Publishing, p. 012046..10.1088/1742-6596/165/1/012046 ↗
41. Innovative perfluoropolyether‐functionalized gas diffusion layers with enhanced performance in polymer electrolyte membrane fuel cells10.1002/fuce.201900169 ↗
42. Novel superhydrophobic microporous layers for enhanced performance and efficient water management in PEM fuel cells10.1016/j.ijhydene.2013.12.199 ↗
43. Effect of PTFE content in gas diffusion media and microlayer on the performance of PEMFC tested under ambient pressure10.1002/fuce.200600032 ↗
44. Microporous layer in proton exchange membrane fuel cells: advancement in materials and properties10.1016/j.jece.2024.114220 ↗
45. Design of electrophoretically deposited microporous layer/catalysts layer composite structure for power generation of fuel cells10.1016/j.ijhydene.2008.05.046 ↗
46. Laser machined gradient grooved microporous layer for better water management at high relative humidity in PEMFC10.1016/j.ijhydene.2025.02.425 ↗
47. Effect of pore size distribution in the gas diffusion layer adjusted by composite carbon black on fuel cell performance10.1002/er.6350 ↗
48. Suppression of negative temperature coefficient of resistance of multiwalled nanotube/silicone rubber composite through segregated conductive network and its application to laser-printing fusing element10.1016/j.orgel.2016.07.010 ↗
49. Advanced catalyst design induced enhancement of multi-walled nanotube debundling and electrical conductivity of multi-walled nanotube/silicone composites10.1039/C5RA24443A ↗
50. Highly conductive multiwall carbon nanotube and epoxy composites produced by three-roll milling10.1016/j.carbon.2009.03.039 ↗
51. Superior electromagnetic interference shielding and dielectric properties of carbon nanotube composites through the use of high aspect ratio CNTs and three-roll milling10.1016/j.orgel.2013.02.029 ↗
52. Crack evolution during the film drying process of fuel cell microporous layer ink10.1016/j.colsurfa.2022.129283 ↗
53. Rational design of carbon network structure in microporous layer toward enhanced mass transport of proton exchange membrane fuel cell10.1016/j.jpowsour.2022.231623 ↗
54. Determination of the pore size distribution of micro porous layer in PEMFC using pore forming agents under various drying conditions10.1016/j.ijhydene.2010.07.056 ↗
55. Influence of PTFE content on structural parameters of microporous layer and its performance in PEMFCs10.1016/j.ijoes.2024.100615 ↗
56. Development of an optimal gas diffusion medium for polymer electrolyte membrane fuel cells and assessment of its degradation mechanisms10.1016/j.ijhydene.2015.05.100 ↗
57. A gas diffusion nanocomposite layer with a hydrophilic–superhydrophobic columnar interface for enhanced water and gas transport10.1039/D4TA09052G ↗
58. Low Pt loading for high-performance fuel cell electrodes enabled by hydrogen-bonding microporous polymer binders10.1038/s41467-022-34489-x ↗
59. A comparative investigation of carbon black (Super-P) and vapor-grown carbon fibers (VGCFs) as conductive additives for lithium-ion battery cathodes10.1039/C5RA19056H ↗
60. Electrochemical properties of super P carbon black as an anode active material for lithium-ion batteries10.1016/j.matchemphys.2011.08.060 ↗
61. Ding · 2014
62. Super P carbon modified lithium anode for high‐performance li− O2 batteries10.1002/celc.201800289 ↗
63. Effect of PTFE content in microporous layer on water management in PEM fuel cells10.1016/j.jpowsour.2007.11.055 ↗
64. Handbook of fuel cells—fundamentals, technology and applications
65. Graphene synthesis, characterization and its applications: a review10.1016/j.rechem.2021.100163 ↗
66. Bioinspired superhydrophobic surfaces, fabricated through simple and scalable roll-to-roll processing
67. Stress mechanisms acting during the dispersing in highly viscous media and their impact on the production of nanoparticle composites10.1016/j.cherd.2018.10.002 ↗
68. A rheological approach to studying process-induced structural evolution of the microporous layer in a proton exchange membrane fuel cell10.1016/j.electacta.2021.138690 ↗
69. Slurry solvent content influence on electrode preparation, microstructure and performance10.2109/jcersj2.22085 ↗
70. Advanced electrode processing of lithium ion batteries: a review of powder technology in battery fabrication10.1016/j.partic.2020.12.003 ↗
71. Towards understanding of cracking during drying of thick aqueous-processed LiNi0. 8Mn0. 1Co0. 1O2 cathodes10.1021/acssuschemeng.9b06363 ↗
72. Gas diffusion layer degradation in proton exchange membrane fuel cells: mechanisms, characterization techniques and modelling approaches10.1016/j.jpowsour.2021.230560 ↗
73. The role of the van der Waals force in the agglomeration of powders containing submicron particles10.1016/0032-5910(85)80036-X ↗
74. Experimental measurement of effective diffusion coefficient of gas diffusion layer/microporous layer in PEM fuel cells10.1016/j.electacta.2011.12.110 ↗
75. Carbon nanotube film based multifunctional composite materials: an overview10.1088/2631-6331/ab9752 ↗
76. Rubber composites with piezoresistive effects10.7473/EC.2013.48.1.76 ↗
77. O'Hayre · 2016
78. Characterisation of novel and high performing double-sided microporous-layers-coated gas diffusion layers for polymer electrolyte membrane fuel cells10.3390/en16227601 ↗